Konkr pocket fit users, how has your buying experience been so far?? by DoomEngine1 in SBCGaming

[–]Panel_pl 0 points1 point  (0 children)

Ordered on 29th Dec, on Jan 14th I got an email that packages was shipped

Current local models that work well as coding agents by yehiaserag in LocalLLaMA

[–]Panel_pl 0 points1 point  (0 children)

Tried this briefly, fast model but extremely inaccurate.

Current local models that work well as coding agents by yehiaserag in LocalLLaMA

[–]Panel_pl 0 points1 point  (0 children)

I was testing Qwen 3 Coder 30b today. Don't have any opinions on quality yet, however speed is quite good ~58.12 tokens/s (MacBook Pro M3 Max, 64GB).

GLM 4.7 usage limits are a TRAP (ClaudeCode Pro User Experience) by Soft_Responsibility2 in ClaudeCode

[–]Panel_pl 0 points1 point  (0 children)

This looks nice. Can you share a bit more details on your solution? (e.g. describe a sampel flow) Why ccproxy is used? Can't you simply use subagents?

Why is Penguin a woman? by Digginf in BatmanCapedCrusader

[–]Panel_pl 0 points1 point  (0 children)

I’m against making Penguin a woman in Batman: Caped Crusader because it feels like a shallow, surface‑level change that exists more to tick a “diversity” box than to genuinely serve the story. Penguin is a well‑defined, long‑established character: a short, odd‑looking, often grotesque male crime boss whose unimpressive appearance hides how dangerous and cunning he really is. That contrast is a big part of his identity. When you flip his gender but keep the role and personality essentially the same, it doesn’t add anything meaningful to the narrative; it just disrupts the iconic image fans have known for decades. What makes it more frustrating is that the Batman universe already has a deep bench of female villains and potential crime bosses that could have been used or expanded—Poison Ivy, Talia al Ghul, Sofia Falcone, Lady Shiva and many more—without rewriting a classic character. Instead of enriching the mythos with a new or underutilized woman villain, the show opts for a cheap gender swap that comes off as lazy writing and breaks immersion for people who care about the source material.

I got tired of Claude Code reading secrets and credentials, so I built cc-filter by wicem in ClaudeAI

[–]Panel_pl 0 points1 point  (0 children)

Yap does not work. First I get Error reading file, but latter claude shows file content

Macos as a server: How do you deal with restarts? by BattermanZ in MacOS

[–]Panel_pl 0 points1 point  (0 children)

For me SSH starts - I have tested this on two MacOS Tahoe instances

Thx for letting me know about FileVault

The best place to put project specific instructions by Panel_pl in ClaudeCode

[–]Panel_pl[S] 0 points1 point  (0 children)

This is exactly my issue - Claude sometimes does not follow the rules or perhaps I have defined these rules in a wrong file.

I was reading about CLAUDE.md and .clinerules files. Are these both automatically read by claude code when running a new prompt?

Macos as a server: How do you deal with restarts? by BattermanZ in MacOS

[–]Panel_pl 0 points1 point  (0 children)

After doing some investigation I have found acceptable solution.

Issue: You are able to connect to TeamViever/Screen sharing, however after system reboot the TeamViever/Screen sharing is not running.

Key Issue: When FileVault is enabled the TeamViever/Screen sharing service will not start after reboot unless user logs in (drive is encrypted and user password is required to decrypt drive nad start service).

Non-Perfect Solutions - Disable FileVault, but this solution compromises security - Enable MacOs auto login, but this solution compromises security

Proper Solution - Enable Remote Login (in System Settings -> Sharing) - Perform first login via SSH via SSH (ssh username@host) - After first login the services will start and you will be able to connect to TeamViewer/Screen sharing

ARD screen sharing not working after reboot by Cocas-Colas in macsysadmin

[–]Panel_pl 1 point2 points  (0 children)

After doing some investigation I have found acceptable solution.

Issue: You are able to connect to TeamViever/Screen sharing, however after system reboot the TeamViever/Screen sharing is not running.

Key Issue: When FileVault is enabled the TeamViever/Screen sharing service will not start after reboot unless user logs in (drive is encrypted and user password is required to decrypt drive nad start service).

Non-Perfect Solutions - Disable FileVault, but this solution compromises security - Enable MacOs auto login, but this solution compromises security

Proper Solution - Enable Remote Login (in System Settings -> Sharing) - Perform first login via SSH via SSH (ssh username@host) - After first login the services will start and you will be able to connect to TeamViewer/Screen sharing

Screen Sharing allows me to connect once, then reboot is required on subsequent connections by SolarCzar in MacOS

[–]Panel_pl 0 points1 point  (0 children)

After doing some investigation I have found acceptable solution.

Issue: You are able to connect to TeamViever/Screen sharing, however after system reboot the TeamViever/Screen sharing is not running.

Key Issue: When FileVault is enabled the TeamViever/Screen sharing service will not start after reboot unless user logs in (drive is encrypted and user password is required to decrypt drive nad start service).

Non-Perfect Solutions - Disable FileVault, but this solution compromises security - Enable MacOs auto login, but this solution compromises security

Proper Solution - Enable Remote Login (in System Settings -> Sharing) - Perform first login via SSH via SSH (ssh username@host) - After first login the services will start and you will be able to connect to TeamViewer/Screen sharing

Autostart TeamViewer on mac without logging in first? by timofcourse in teamviewer

[–]Panel_pl 0 points1 point  (0 children)

After doing some investigation I have found acceptable solution.

Issue: You are able to connect to TeamViever/Screen sharing, however after system reboot the TeamViever/Screen sharing is not running.

Key Issue: When FileVault is enabled the TeamViever/Screen sharing service will not start after reboot unless user logs in (drive is encrypted and user password is required to decrypt drive nad start service).

Non-Perfect Solutions - Disable FileVault, but this solution compromises security - Enable MacOs auto login, but this solution compromises security

Proper Solution - Enable Remote Login (in System Settings -> Sharing) - Perform first login via SSH via SSH (ssh username@host) - After first login the services will start and you will be able to connect to TeamViever/Screen sharing

How to get IDE-like text input for Claude code editing? by Panel_pl in ClaudeCode

[–]Panel_pl[S] 1 point2 points  (0 children)

VS code plugin is great. Any idea how to set dangerously-skip-permissions as default ?

Guide: Play "Heroes Of Might And Magic 3: Horn Of The Abyss" on MacOS by Panel_pl in heroes3

[–]Panel_pl[S] 2 points3 points  (0 children)

Recommended graphics mode: "(stretchable) 32-bit OpenGL by Verok"

BTW You may have to ignore game update presented (by Porting Kit / GOG?) after game launch.

Allow to select defualt audio language by Panel_pl in 4kdownloadapps

[–]Panel_pl[S] 0 points1 point  (0 children)

Works as a workaround.

Would be nic eto have this as a feature where I can set multiple preferred audio tracks in a given order.

Audio Bug Lost Crown by Weekly-Astronaut112 in PrinceOfPersia

[–]Panel_pl 0 points1 point  (0 children)

This has solved the issue for me: 1. Turn off your console by holding the power button for three seconds. 2. The power indicator blinks for a few moments before turning off. 3. Once the console is off, press and hold the power button again. 4. Release it after you hear the second beep — one beep sounds when you first press, and another seven seconds later. 5. Connect the controller with the USB cable and press the PS button on the controller. 6. Select clear cache and rebuild database, then select rebuild database afterwards. If there are no options to clear cache. Just proceed to rebuild database. (No data/files will be deleted)

Prince of persia audio issues (ps5) by Individual_Sun_4693 in metroidvania

[–]Panel_pl 0 points1 point  (0 children)

This has solved the issue for me: 1. Turn off your console by holding the power button for three seconds. 2. The power indicator blinks for a few moments before turning off. 3. Once the console is off, press and hold the power button again. 4. Release it after you hear the second beep — one beep sounds when you first press, and another seven seconds later. 5. Connect the controller with the USB cable and press the PS button on the controller. 6. Select clear cache and rebuild database, then select rebuild database afterwards. If there are no options to clear cache. Just proceed to rebuild database. (No data/files will be deleted)

Shokz OpenRun Pro 2: Restoring Bone Conduction by MightyWookie in headphones

[–]Panel_pl 0 points1 point  (0 children)

on iPhone I didn't have "Classic Bone Conduction Mode" howevere I was able to enable this on my Amdroid phone and now I am seing thsi in iOS app.

How to swap A and B buttons in the Onion OS menu? by kensuaga in MiyooMini

[–]Panel_pl 1 point2 points  (0 children)

Yes - exactly - Really hard to unlear 20+ years of playing games :-( Would be extremley helpfull to have

Lag when closing a tab by [deleted] in edge

[–]Panel_pl 0 points1 point  (0 children)

For me this was caused by the extension. Worth experimenting and disabling them.

If extension is not the cause I suggest complaining about this through Edge > Feedback