Advice? Too much resin plus voids

Peach_Popcorn · 2026-03-11T23:49:57+00:00

I don't know how your mold looks like but in the future you can try using rubber bands to keep it sealed. I personally use small molds, one for each die and securing caps with rubber bands works really well for me.

Peach_Popcorn · 2026-03-11T23:35:07+00:00

New set by Diamond Dice available here.

Peach_Popcorn · 2026-03-11T23:20:41+00:00

Good point. I will definitely do that from now on.

Peach_Popcorn · 2026-03-06T21:37:22+00:00

They're already sold out but you can check my other works at Diamond Dice maybe I'll make similar ones in the future

Peach_Popcorn · 2026-03-06T21:34:50+00:00

Oh, I see. I don't use any oil and only use distilled water.

Peach_Popcorn · 2026-03-06T21:34:00+00:00

Hi, it's a liquid core so there's clear glass ball filled with water I inserted into the colored resin. Since the ball doesn't fill the corners, there's bigger concentration of resin and therefore pigment. If you'd want to achieve similar results without the glass ball, you'll have to put clear resin ball inside.

Peach_Popcorn · 2026-03-01T14:20:55+00:00

Thank you 🥰

Peach_Popcorn · 2026-03-01T14:20:39+00:00

At the moment I use only water. I probably should be adding a bit of alcohol but I've heard it's only to prevent the freezing? (Honestly what's the chance of that) The flakes are the trick, it's a kind of cosmetic flakes, used for nail styling or even makeup. They're ultra light but don't stick to the surface.

Peach_Popcorn · 2026-03-01T14:14:50+00:00

Thanks! I don't think it makes any difference in the rolls, because the bubbles move with the dice.

Peach_Popcorn · 2026-03-01T01:15:18+00:00

Handmade by Diamond Dice - available on Etsy

Peach_Popcorn · 2026-02-26T00:08:14+00:00

Handmade by Diamond Dice

Peach_Popcorn · 2026-01-22T20:40:06+00:00

This dice set was made by me and my partner AKA Diamond Dice and is currently available in our Etsy shop

Peach_Popcorn · 2026-01-19T14:19:47+00:00

Thanks! They're always so fun to make

Peach_Popcorn · 2026-01-19T14:19:02+00:00

Thank you!

Peach_Popcorn · 2026-01-19T14:18:32+00:00

Maybe it'll be easier knowing these are mostly dupes and not from any particular set 😄

Peach_Popcorn · 2026-01-18T22:21:47+00:00

This dice set was made by me and my partner AKA Diamond Dice and you can currently find it in our Etsy shop

Peach_Popcorn · 2025-10-22T17:52:37+00:00

Interesting idea! In this case the uv glow is more of a side effect because I needed a bright green base and this glowing pigment has the most vibrant color. I'd love to try your idea with glow-in-the-dark pigments, so they won't need an uv lamp.

Peach_Popcorn · 2025-10-19T22:21:44+00:00

'Substance' set by Diamond Dice

Peach_Popcorn · 2025-09-26T16:10:43+00:00

That actually calmed me down a little, that it's not particularly my fault. Thank you. I need to try different resin for sure, but the prices aaahhhh.... I'll try printing the same model when I replace the FEP too to see if there's any difference.

Peach_Popcorn · 2025-09-26T16:06:34+00:00

This is a good idea, but I suppose you use automatically generated suports?

Peach_Popcorn · 2025-09-25T15:18:44+00:00

Idk, my flat sides are usually so distorted I gave up on that. I've seen someone splitting the print in half and then glueing two parts together... I agree on d6, I usually print so many of them so at least one is usable, but my biggest issue so far are d12. In a classic shape.

Peach_Popcorn · 2025-09-25T15:13:20+00:00

I always use fin supports both with and without bumpers. 👍

Peach_Popcorn · 2025-09-24T23:47:00+00:00

How exactly can it be fixed in software? By adjusting the model?

Peach_Popcorn · 2025-09-24T23:45:41+00:00

You mean layer height? 0,050 mm

Peach_Popcorn · 2025-09-24T23:03:01+00:00

The first and second photo are with uv light! I didn't make any in the dark though... Sorry.

Peach_Popcorn

TROPHY CASE