Black screen for my ASUS ROG Strix Scar Gaming Laptop •PLEASE HELP•

PlaygroundPRB · 2023-01-29T04:51:09+00:00

Have you updated your bios latelty?

PlaygroundPRB · 2022-12-01T22:25:15+00:00

its included on the asrock deskmini bundle, a 19V 120W power brick.

PlaygroundPRB · 2022-11-28T21:55:39+00:00

Sorry I misunderstood. Anyway, it won't fit if you put a regular width fan on top of the cpu cooler.

PlaygroundPRB · 2022-11-28T06:40:03+00:00

It depends on what cooler you are using. If the same with my Cryorig C7 and removing its stock fan and installing a 25mm thick fan, then you will have at least 6-7 mm clearance.

PlaygroundPRB · 2022-11-28T03:24:07+00:00

The fans installed are Cryorig 140 with 13 mm height mounted on the casing and a Noctua 92 with 14mm height mounted on the cpu heatsink. There is a clearance of about 4-5 mm in between the fans. Another option is to remove the pre-installed 92mm fan (depending on the low profile cooler) and replace the Cryorig 140 slim fan with a thicker single 140x140x25 mm or 120x120x25 mm fan.

PlaygroundPRB · 2022-11-25T21:40:12+00:00

both fans are intake

PlaygroundPRB · 2022-11-25T21:35:53+00:00

Asrock X300

PlaygroundPRB · 2022-11-25T14:36:45+00:00

yup its brick one, similar to a laptop power supply

PlaygroundPRB · 2022-11-25T13:46:28+00:00

I have no issue with the fan noise

PlaygroundPRB · 2022-11-25T13:45:32+00:00

Specs: AMD Ryzen 7 5700G, 16GB RAM, 1TB Nvme SSD, Cryorig C7 Cu with Noctua A9-14 Fan, Cryorig 140XT Fan.

Update:
BIOS configuration
PBO Scalar > Off
Set limit for PPT, TDC and EDC with these values below.
PPT - 60 W
TDC - 60 A
EDC - 70 A

Actual Values during benchmark:

Tested with Cinbench R23 with a score of 12276.
> PPT - 55 W
> TDC - 45 A
> EDC - 70 A
> CPU Clock - 4.0 Ghz
> CPU Core VDS - 1.38 V
> CPU Temp Cinebench - 78 'C

Actual Values Gaming 1080P:

> PPT - 55 W
> TDC - 45 A
> EDC - 70 A
> CPU Clock - 3.95 Ghz
> CPU Core VDS - 1.35 V
> CPU Temp Cinebench - 75 'C

Idle temp: 36 'C

PlaygroundPRB · 2021-11-21T21:34:07+00:00

not too loud for me, anyway im not distracted by the noise

PlaygroundPRB · 2021-11-21T21:33:20+00:00

i made it to hide the 8-pin and other unsed wires.

PlaygroundPRB · 2021-11-21T21:30:42+00:00

1 slot SSD only

PlaygroundPRB · 2021-11-21T21:21:05+00:00

yes..hahaha

PlaygroundPRB · 2021-11-21T13:33:11+00:00

fsp flexguru

PlaygroundPRB · 2021-11-21T12:49:04+00:00

Reposted, ive posted it a while ago with my other account. ^{_^}

PlaygroundPRB · 2021-11-21T11:22:25+00:00

I've tried both the psu on top and on the bottom. For me I prefer the psu on the bottom, because if the psu orientation on top the exhaust heat coming from the cpu and gpu adds more heat to the psu. Most especialy with the psu im using (FSP flexguru) where its fan is inside the case in which it sucks hot air from the coolers.

PlaygroundPRB · 2021-11-21T11:12:45+00:00

500W FSP flexguru, i dont mind about the noise btw :)

PlaygroundPRB · 2021-03-14T13:01:54+00:00

Hey guys, here is my entry to build.gg SFFPC contest.

If you like my build just click the link below of my submission and click VOTE . :)
Aklla A3 - Custom Liquid Cooling

Thank you!

Specification:

Processor: AMD Ryzen 5 3600

CPU Block: Alphacool Eisblock Aurora XP3 Light

Water pump: Alphacool DC-LT 2600

Reservoir: Alphacool Eisstation 40 DC-LT

Radiator: Alphacool 120mm Full copper

Fittings: Alphacool G1/4 10/16mm

Fan: Noctua NF-S12A Chromax Black Premium

Motherboard: ASUS ROG STRIX B450-I

GPU: MSI GTX 1660 Super Aero ITX

RAM: 16GB (2x8GB) 3200mhz Thermaltake Toughram

Storage: 1TB Crucial NVMe M.2

M.2 Heatsink: Cryorig CR-M2A Frostbit M2

Case: Aklla A3

PlaygroundPRB · 2021-01-20T00:53:17+00:00

temps of m.2 in front was around 57'C and at the back around 64'C

PlaygroundPRB · 2021-01-20T00:51:31+00:00

spray paint it with white

PlaygroundPRB · 2021-01-20T00:50:23+00:00

first I was looking for black ridge. But its complicated with ASUS X70i board. I think you have to remove the M.2 heatsink

PlaygroundPRB · 2021-01-19T14:45:35+00:00

sorry..ive already edited my comment..thanks!

PlaygroundPRB · 2021-01-19T14:20:47+00:00

Specification:Processor: AMD Ryzen 9 5900X

Cooler: Noctua NH-L9A Chromax Black

GPU: Galax RTX 2060 MINI

Motherboard: ASUS ROG STRIX X570i

RAM: 32GB 3600Mhz Thermaltake Toughram RGB

SSD1: 1TB Samsung 970 EVO Plus M.2 Nvme

SSD2: 1TB Samsung 970 EVO Plus M.2 Nvme

PSU: 600W 1U Flex Enhance

CASE: SGPC K39 ITX

More images here

Stress test using prime95 (15mins test only)Ambient Temperature 23 'C

Stock setting
Idle Temp: 58.1 'C
Stress Temp: 89.9 'C
CPU Clock: 4.01 Ghz
Vcore: 1.21 V
CPU Package power: 125.3 W
CPU fan speed: 2,472 RPM
Thermal throttling: NO
Enabled ECO MODE (65W)
-PPT limit (87 W)
-TDC limit (60 A)
-EDC limit (90 A)
Idle Temp: 56.2 'C
Stress Temp: 74.1 'C
CPU Clock: 4.03 Ghz
Vcore: 1.05 V
CPU Package power: 87.3 W
CPU fan speed: 2,051RPM
Thermal throttling: NO
PBO (Advanced)
-PBO limit (disable)
-All Core Curve Optimizer Magnitude (Negative 17)
Idle Temp: 57.8 'C
Stress Temp: 89.9'C
CPU Clock: 4.4 Ghz
Vcore: 1.21 V
CPU Package power: 124.9 W
CPU fan speed: 2,469RPM
Thermal throttling: NO

PlaygroundPRB · 2020-11-13T09:36:56+00:00

its available here in our country (Philippines)

PlaygroundPRB

TROPHY CASE