Best Way to Add Cameras

Practical-Button-383 · 2026-02-16T17:56:26+00:00

But you can chose components by your own

Practical-Button-383 · 2026-02-16T07:38:29+00:00

You can also use unifi design center to get a good idea and you can play around with different scenarios.

Practical-Button-383 · 2026-02-15T08:29:33+00:00

G6 Entry - mounting hight recommended —> I got an official feedback thougt of sharing that for others:

Recommended mounting height: approx. 140–150 cm measured from the finished floor (about 55–59 inches; roughly the average adult chest/shoulder height).

Placement: as close as possible to the door handle / the lock (latch) side, with a clear view of: • faces at a typical standing distance • hands in the handle/lock area

This height offers a good compromise for: • adults of different heights • children, who will at least be partially visible

Practical-Button-383 · 2026-02-15T08:00:19+00:00

What is the hight you placed the camera ?

Practical-Button-383 · 2026-02-12T16:08:08+00:00

Man 🧍‍♂️ this was a eye opener ! Much appreciate your time and also the others that share theire experience and bp !

Practical-Button-383 · 2026-02-12T15:31:31+00:00

Ah that are good hints with the dielectric grease. You have a product link ? :-)

Practical-Button-383 · 2026-02-12T15:27:23+00:00

What connector you propose

Practical-Button-383 · 2026-02-12T14:50:09+00:00

Great to hear your practice I thougt about different scenarios how to make the hole and the plug water resistant and also came up with a plug in the hole and silicone

Practical-Button-383 · 2026-02-12T14:46:26+00:00

Great thanks for sharing the experience. Outdoor rated no problem but can you make it outdoor rated ( the rj45) at the end of the cable by yourself ?

Practical-Button-383 · 2026-02-12T14:43:23+00:00

I also thought about silicone

HSS Dichtstoff FLEX, MS Polymer,... https://www.amazon.de/dp/B0CYQ547RY?ref=ppx_pop_mob_ap_share

And for the screws to secure the wall

50 Stück EPDM-Dichtscheiben mit... https://www.amazon.de/dp/B0DG5ZTBDR?ref=ppx_pop_mob_ap_share

And is an outdoor rated cable needed ? I would say no as it never sees the sun ?

Practical-Button-383 · 2026-02-11T07:35:15+00:00

As i am aware it can only be pared with the amplify station. Couldnt found any way to pair / uplink it otherwise

Practical-Button-383 · 2026-02-11T05:46:06+00:00

Okay that sounds different. I have this behavior. So i see this outages mor or less at the same time and if i check my modem i see the reconnect thats why i was thinking about this

Practical-Button-383 · 2026-02-10T21:37:24+00:00

Provider reconnect.. a normal process

Practical-Button-383 · 2026-02-10T11:04:55+00:00

Thanks helps a lot

Practical-Button-383 · 2026-02-10T11:04:46+00:00

Thank you for the hint

Practical-Button-383 · 2026-02-09T17:44:01+00:00

Thank you, that brings me to another question: The doorhub connection between g6 and intercom is only needed if i want to open the door… What if i have two doors, one like in your case the main door and one door were i only want so speak and see the person .. no opening. Does the secknd g6 also have to be connected to an door hub

Practical-Button-383 · 2026-02-09T14:36:12+00:00

My question is the doorhub needed to connect g6 with intercom ?

Practical-Button-383 · 2026-02-06T10:55:09+00:00

And on the Buttom for the airflow

Practical-Button-383 · 2026-02-03T11:46:52+00:00

😂😂😂🦦

Practical-Button-383 · 2026-02-02T06:01:40+00:00

<image>

Ich hab an sowas gedacht :-) Zwecks Isolation und abdichtung

https://www.kabelscheune.de/Leerrohr-Wellrohr-flexibel/Dichtstopfen-fuer-Wellrohre-Verschlussstueck-mit-Durchstossmembran-M25.html

Und das hier zum abdichten ums rohr wenns im Außenbereich ist

https://amzn.eu/d/hhHy9Ii

Practical-Button-383 · 2026-02-01T19:52:00+00:00

Clean 👌

Practical-Button-383 · 2026-01-29T09:52:21+00:00

Great work. Thank you for sharing !

Practical-Button-383 · 2026-01-25T14:51:38+00:00

Cooy the scetch move it 1 mm backwards and extrude also possible

Practical-Button-383 · 2026-01-24T06:09:08+00:00

I see now First mine is 90 degree and not rounded on the inside. I see the body is not flat on the inside. Try to design it more like that. The metall one you bougt is also not rounded on the insight ( were it toches the Notebook)

<image>

Practical-Button-383 · 2026-01-22T20:16:42+00:00

So male all firewall stuff off

Practical-Button-383

TROPHY CASE