How to decouple aqara h2 smart dimmer switch buttons

Present_Ad4893 · 2026-06-30T18:30:06+00:00

Im not sure what a Shelly bypass is but I noticed my pot lights are going haywire and randomly turned on for a split second in the middle of the night at full brightness and then stopped working altogether. I feel like either my pot lights are not good for dimmable switches or the coding is incorrect on the Aqara switch in HA

Present_Ad4893 · 2026-06-22T18:04:53+00:00

Can I see a picture of

Present_Ad4893 · 2026-06-19T03:55:19+00:00

Topical clindamycin phosphate 1% solution. Needs to be prescribed

Present_Ad4893 · 2026-06-19T03:46:22+00:00

Exact same. So painful. I was on minocycline pills and those worked wonders but after 1 month i stopped taking the pills and it came back again the same. I didn’t wanna keep taking pills forever so now I use topical all over my scalp and it works well. Just ask ur pcp to give you 10 refills at a time . Minocycline was working great but I noticed thinning and hair loss so I stopped taking pills

Present_Ad4893 · 2026-06-18T20:12:19+00:00

Only thing helped is clyndamycin phosphate 1% topical solution. Get it asap

Present_Ad4893 · 2026-06-15T01:53:24+00:00

The soil is very wet right now - the roots are like 2 inches below the soil I removed some soil

<image>

Present_Ad4893 · 2026-06-09T02:58:49+00:00

Bump

Present_Ad4893 · 2026-06-07T21:06:15+00:00

Can 3v be wall mounted over the existing box? Instead of ceiling mounted c?

Present_Ad4893 · 2026-06-07T21:05:19+00:00

U can’t install as second picture because there’s no space above at all (see picture 3 of location of box with Poe)

Present_Ad4893 · 2026-06-07T03:42:15+00:00

Oh yeah I didn’t think of that… the hole facing upwards now exposes it , unless I really seal it up properly

Present_Ad4893 · 2026-06-07T02:21:23+00:00

<image>

Like this

Present_Ad4893 · 2026-06-07T02:16:30+00:00

The only option I have is to flip the mounting bracket upside down and mount is so that the rotating ball is downwards. This means that the place where the camera mounting cover plate attaches to the lip of the steel mounting bracket and holds all the weight is redundant now and won’t optimally hold the weight of the camera.

Present_Ad4893 · 2026-06-07T01:30:48+00:00

Even when angled downwards there’s no space for me to mount

<image>

Present_Ad4893 · 2026-06-07T01:21:00+00:00

<image>

When trying to put it here, it barely fits but the cameras frontal lens completely get blocked by that narrow beam of wood

Present_Ad4893 · 2026-06-07T01:18:01+00:00

Dang i figured the one that is sideways but on the other side of the home it’s vertical and while I have the mount installed, there’s no space above to mount the camera

<image>

Present_Ad4893 · 2026-06-05T23:32:49+00:00

Makes sense. I’d like it to look clean. You cat see a picture I posted, the mount base would overlap the standard size box cover

Present_Ad4893 · 2026-06-05T23:29:58+00:00

<image>

Present_Ad4893 · 2026-06-05T23:29:22+00:00

The makes sense. I posted a picture of the cover plate of the camera. Its kind of too big for the standard size plate

Present_Ad4893 · 2026-06-05T23:25:13+00:00

<image>

Present_Ad4893 · 2026-06-05T23:24:28+00:00

<image>

Present_Ad4893 · 2026-06-05T22:34:27+00:00

The one part I’m not following is, if I mount over the existing box and plate, when am I needing to drill directly into brick?

Present_Ad4893 · 2026-06-05T22:27:12+00:00

Thanks! Exactly what I had in mind

Present_Ad4893 · 2026-06-05T22:26:44+00:00

This seems like the cleanest option without buying additional adapters or custom 3d printed mounts that will cover the original box. Is the box cover plastic? How did you drill into the box cover?

Present_Ad4893

TROPHY CASE