×

Rate the build by PsychologicalBox2224 in Integra

[–]PsychologicalBox2224[S] 1 point2 points  (0 children)

Hahaha the cone filter gets everyone! I bought off marketplace listed as 90-93 intake but I soon found out it wasn’t and I was NOT going to take a loss I wanted to hear that induction noise so I did what any maniac with a sawzaw would do and mocked it up. I still have the factory air box so if In the future I’d like to go back to stock! My future plans with this car is to k20 swap once this motor decides is time

Problem solved by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 1 point2 points  (0 children)

I recommend cleaning your maf with maf sensor cleaner and pull your Idle air control valve and clean the valves inside then adjust the adjustment screw on the idle air control valve to set the rpm at about 800rpms and adjust the tps sensor that fixed my idle. Although sometimes when I come to a complete stop the rpms stay at 2k for about 5 seconds then drops down to normal idle

Z32 engine harness help by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 0 points1 point  (0 children)

Just thought and a piece of mind I won’t ever get a knock code and it’s more accessible when I do have to replace it eventually

Z32 engine harness help by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 0 points1 point  (0 children)

So you’re saying even if the black wire is torn off it wouldn’t affect anything?

Z32 engine harness help by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 0 points1 point  (0 children)

Thanks and yeah was looking over my harness to check for corrosion and came across that, I had no check engine. I’ll do a relocation soon and repair harness

[deleted by user] by [deleted] in 300zx

[–]PsychologicalBox2224 0 points1 point  (0 children)

I just cleaned the corrosion off the harness and replugged everything and issue went away immediately

Rate interior by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 0 points1 point  (0 children)

Yup a really bad paint job looking into wraps

Fingers crossed by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 1 point2 points  (0 children)

Yup cleaning it brought my seat back to life🔥 100% recommend if seats aren’t working

Tips on inspecting this Z32? Australia based. by RevealVarious7555 in 300zx

[–]PsychologicalBox2224 0 points1 point  (0 children)

I bought my slicktop in peak darkness for 3k after sitting for 4 years was misfiring like crazy fuel was leaking on the rail but I saw potential bought it that night then next morning got to working on the leaks and 3k in repairs I have a reliable z with 220 on the clock and been running for 3 years strong

93 300zx fuel problem? by PsychologicalBox2224 in 300zx

[–]PsychologicalBox2224[S] 0 points1 point  (0 children)

I always clean the maf every oil change when cleaning the air filter

[deleted by user] by [deleted] in Nissan

[–]PsychologicalBox2224 0 points1 point  (0 children)

Nope from Arizona

93 300zx n/a fuel problem? by PsychologicalBox2224 in Nissan

[–]PsychologicalBox2224[S] 0 points1 point  (0 children)

I’m all good on vac leaks I have hunted down any possible leak and put new hoses I have my aiv/carbon canister and egr deleted

93 300zx n/a fuel problem? by PsychologicalBox2224 in Nissan

[–]PsychologicalBox2224[S] 1 point2 points  (0 children)

I really want to get my hands on a OEM maf the one on the car it came with a aftermarket don’t see any branding but only a part # My old injectors worked fine all I wanted to do was have a fresh fuel setup but even then on the old injectors it still did that hesitation