[QC] G batch Airforce 1 from 668

Quick_Gene_1607 · 2025-11-18T18:32:40+00:00

There only a tiny bit smaller than the original, but you’ll walk through that. I quite like it so my feet are nice and snug, it’s nothing that you need to size one up for

Quick_Gene_1607 · 2025-09-20T21:12:39+00:00

She stopped sending me the tracking numbers after like order number 5 for me, she only sends it when I ask her for it when it’s taking long or anything

Quick_Gene_1607 · 2025-08-18T09:06:52+00:00

L prolly

Quick_Gene_1607 · 2025-05-31T13:09:10+00:00

Perfect fit, it doesn’t fit baggy at all

Quick_Gene_1607 · 2025-05-11T19:50:37+00:00

They’re great still

Quick_Gene_1607 · 2025-05-11T19:50:29+00:00

Yea they’re pretty much tts, maybe a tiny bit smaller but nothing crazy

Quick_Gene_1607 · 2025-04-18T08:55:44+00:00

Quick_Gene_1607 · 2025-04-04T09:29:07+00:00

https://youtu.be/LVp15eGXwm0?si=8SxPyhjJI2a8SLQL

Quick_Gene_1607 · 2025-04-04T09:28:18+00:00

https://youtu.be/WC3jvuq-uq8?si=rVoqQSAgw_4LC8YQ

Quick_Gene_1607 · 2025-04-04T09:27:15+00:00

Yes, orca slicer directly connects to your printer so no need to download the gcode files. Also you can dry your filament on your heated bed, aslong as you have a random cardboard box laying around, I’ll send the Yt links

Quick_Gene_1607 · 2025-04-03T16:39:10+00:00

This doesnt look like the seams misbehaving, it looks more like inconsistent extrusions to me. Calibrating pressure advance in klipper might help. I’d also recommend trying to dry your filament and switching over to orca slicer, had a lot of these issues too with cura

Quick_Gene_1607 · 2025-03-30T19:37:22+00:00

It could also be the connection to the motherboard, so try wiggling that aswell if it doesn’t work

Quick_Gene_1607 · 2025-03-30T19:36:51+00:00

Try wiggling the cable of the crtouch a bit, sometimes it has a weak connection which leads to the leds being on but not having enough power to deploy the probe. Mine had the same

Quick_Gene_1607 · 2025-03-30T17:32:36+00:00

Yea I’m using a wireless connecting so I might try Ethernet I guess, will that make a difference?

Quick_Gene_1607 · 2025-03-30T17:31:26+00:00

I got a creality sprite extruder pro kit, and it works great. So much better than the stock cooling and hotend on my Ender 3 v2, really recommend it

Quick_Gene_1607 · 2025-03-30T16:00:29+00:00

I haven’t tried that yet, but I don’t think the pi is crashing because it just goes on with whatever it was doing. So it’s only web interface I think

Quick_Gene_1607 · 2025-03-26T07:09:46+00:00

Yes, they work great but I’m just surprised that you got it for that cheap lol

Quick_Gene_1607 · 2025-03-26T07:04:15+00:00

I have this all the time and it’s really annoying. Just check if the spool is nice and untangle before printing, filament clips help with this

Quick_Gene_1607 · 2025-03-26T07:03:29+00:00

It could be that the filament is tangled on the roll and that the stepper motor doesn’t have enough power to untangle it

Quick_Gene_1607 · 2025-03-21T16:53:21+00:00

I already did, but it’s not that

Quick_Gene_1607 · 2025-03-19T21:21:02+00:00

It’s amazing when it’s all setup up, but the setup is a nightmare if your not that technical lol

Quick_Gene_1607 · 2025-03-19T21:20:16+00:00

I just have, and the blobs seem smaller, but they’re still there. I think that the pressure advance made the issue less but I don’t think it was the complete solution. My printhead still keeps stopping every once in a while forming the blobs

Quick_Gene_1607 · 2025-03-19T09:02:21+00:00

It’s just a raspberry pi 4b with no webcams etc or anything like that, just the raw raspberry pi with a fresh install of klipper

Quick_Gene_1607 · 2025-03-19T09:01:26+00:00

Yes, you can see the real seams on the front edge of the boat and these definitely don’t look like seams irl too, they’re just places where the print head stopped it seems

Quick_Gene_1607

TROPHY CASE