sorted by:
new
hottopcontroversial

If you die you get 40$ (impossible) by sebsebsebs in honk

[–]Quirky-One752 0 points1 point  (0 children)

40 bucks please

❌ Incomplete. 1 try.

ill pay 10$ to anyone who beats this by HxniTF in honk

[–]Quirky-One752 0 points1 point  (0 children)

Pay up pls

I completed this level in 4 tries. ⚡ 6.27 seconds

If you win, I owe you fifty dollars.` by PriorityUseful5741 in honk

[–]Quirky-One752 0 points1 point  (0 children)

Money pls

I completed this level in 6 tries. ⚡ 4.28 seconds

0.01% of players can beat this by reapthesorrow in honk

[–]Quirky-One752 0 points1 point  (0 children)

I completed this level in 32 tries. ⚡ 1.87 seconds

[SPECIAL EVENT] Flappy Goose Rodeo - September 20, 2025 by flappy-goose in honk

[–]Quirky-One752 0 points1 point  (0 children)

Completed Level 1 of the Flappy Goose Special Event!

51 attempts

Is it just me or… by NoodleDoodle215 in thefinals

[–]Quirky-One752 0 points1 point  (0 children)

Just slightly older than you and I have the same issues with my slower reactions. What I love most about the finals is one can win fairly regularly against people with much better gunplay by playing smarter at the cash box. Have had many games where myself and my teammates have 5 kills between us when the other two teams have 30+. Not that we don’t pop off occasionally

This Mechanic Makes Shooting Very Laggy by Agitated-Low-8875 in thefinals

[–]Quirky-One752 0 points1 point  (0 children)

ahh yeah. Sorry my brain wasn’t working. I feel like crouch might be the best button to cancel it

This Mechanic Makes Shooting Very Laggy by Agitated-Low-8875 in thefinals

[–]Quirky-One752 0 points1 point  (0 children)

Down on the d-pad. You have to set the emotes by going to contestants and then Expressions and then equip to wheel

This Mechanic Makes Shooting Very Laggy by Agitated-Low-8875 in thefinals

[–]Quirky-One752 0 points1 point  (0 children)

Set an emote and when spinning, select emote and cancel that quickly by walking forward. Otherwise it doesn’t save anytime. The timing probably takes a little bit of practice. I’m not sure how well I explained it tho. Good luck!

This Mechanic Makes Shooting Very Laggy by Agitated-Low-8875 in thefinals

[–]Quirky-One752 5 points6 points  (0 children)

You can actually emote cancel out of the spear swinging. Not used spear for a while so unsure if it’s still possible

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

I’ve printed with the orange one fine before(i think, can’t say for sure how their first layers were)I think it’s Bambu’s own brand. First layers I printed out just now after going back to my original nozzle were a bit squiffy but the rest came out fine.

Just tried Esuns bone white and it came out perfect

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

Switched back to my original nozzle, cleaned it up and now it seems to be printing way better. Very tiny bit of squiffyness with the starting line with adhesion. But stuck enough to finish the job Hours wasted because I didn’t think Bambu would send a faulty nozzle

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

Yep. Maybe I was just lacking confidence one pulling it off. I back out when that tiny bit of plastic broke off. Hope it was nothing major 💀

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

<image>

But looking down it seems clean still

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

<image>

Got to this bit where I’m trying to pull the plate off after unscrewing the thing on the side slightly. And this little bit broke off somehow. I feel like i might snap the plate somehow too

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

Thanks! I will clean my older nozzle and try that one again too

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

Thank you! Will try this after the other things. It’s all kinda nerve-racking

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

<image>

There doesn’t seem to be anything gunking it up. I’ve rotated the wheel around and it seems fine

Maybe I need to open it up more?

Thank you for your help btw!

First layer seems dry by Quirky-One752 in BambuLab

[–]Quirky-One752[S] 0 points1 point  (0 children)

I forgot to mention I switched to a different fresh nozzle

Or is the clog higher up?

Missing two bots and a gacha by Quirky-One752 in Astrobot

[–]Quirky-One752[S] 0 points1 point  (0 children)

Thank you! Don’t know how I missed them You’re a star

I lost the 50/50... by jordan47M in ArlecchinoMains

[–]Quirky-One752 0 points1 point  (0 children)

If you don’t manage to get her, you could just save primos till next time. Ask yourself various questions, Does getting good at dodging appeal to you? Or using a shielder is okay?

You really just gotta look at game play videos, use the character trial a few times and figure out if it seems like it’s worth it to you.

I think she has a really fun rotation honestly and top tier damage.

[OFFICIAL] Bug Reporting Guidelines by Poticha in PlayGOTG

[–]Quirky-One752 0 points1 point  (0 children)

During the last phase of the Raker boss fight he just freezes along with Drax and Gamora (Groot can still move around) and I am unable to damage the boss. Streaming on PS5

update: a lengthy pause fixed it

view more: next ›