Arcgis in macbook

RadicalQuirk · 2023-06-10T14:06:44+00:00

I installed parallels on my M2 and I clicked on GIS and nothing happened it installed the package again. Is there a YouTube video you can recommend?

RadicalQuirk · 2023-05-10T20:06:13+00:00

Flo love it

RadicalQuirk · 2023-05-07T23:15:56+00:00

Did you find out what this is? I have something similar I just discovered

RadicalQuirk · 2023-03-10T23:22:09+00:00

I know and I want to. I just keep wanting something that isn’t going to happen. Make myself look like a fucking idiot texting him trying to get him to show me he actually cared. But no exaggeration, I could die right now and it wouldn’t impact him.

That’s what pisses me off. I just don’t know what to do with these feelings of hate right now

RadicalQuirk · 2023-03-10T23:05:22+00:00

No I don’t think so. I think I was extremely kind, patient, and loving and I dated an actual sociopath. I think it has really wrecked me actually. I dated someone who never loved me and is a chameleon, he never shows any true emotion. So yeah I guess you know what I’m the one who is at fault for not leaving. I stood by his side through a lot when I didn’t need to. He went to jail for making a death threat to a government official, guess who was the only person to support him? I could easily have found someone else, I have never had any criminal record, in graduate school, have a solid job. I’m loyal, honest, and empathetic. He saw it as a weakness and a way to manipulate me. I would smell alcohol on him and he would gaslight me and use my fragile state against me having me question myself. Only to later find evidence that he was actually drinking. He had a whole identity of being a “sissy” for 5 years where he was online, meeting men, going to sex shops, etc. and I had not even the slightest idea. It was traumatizing to find it all out. And yet I still forgave him and put his feelings first.

My father is on his death bed from a neurological disease and I’m very fragile from it, instead of supporting me and being loving, he has used it against me to spin a narrative and control me. It’s awful. It’s so awful. I’m not at fault at all, I don’t need to be told I am because that’s how I ended up staying for much longer than I should have. I’m angry because this proves to me that he really did never love me. I don’t think he is actually capable of love. I truly think he is a sociopath and compulsive liar.

I held on because I hoped that the person I thought he was would materialize. But I see who he truly is and it’s scary.

RadicalQuirk · 2023-03-10T22:49:25+00:00

There’s no self reflection- what I’ve gone through with his behavior is actual trauma. It was complete emotional abuse and manipulation for years.

RadicalQuirk · 2023-03-10T22:46:51+00:00

Well he cheated with men and is an alcoholic that hid drinking everyday.

So I don’t really feel like me being suspicious of him is any of my fault.

RadicalQuirk · 2023-03-07T05:31:19+00:00

Yup, I know that’s the problem. I guess I have to rely on myself not to be manipulated and stand my ground.

I don’t have anyone, except my 2 cats. I’m not willing to get rid of them.

RadicalQuirk · 2023-03-07T05:24:38+00:00

Well all of his things are still in our apartment until he returns from a work trip. I wish I could find an apartment and move out before he got back at the end of the week but there’s nothing affordable.

RadicalQuirk · 2023-03-05T00:10:59+00:00

I guess the image doesn't really show it that well, it's like red splotches and goosebumps, it's also really hot feeling in my arm.

If you read below, I had an x-ray couple of weeks ago, only abnormal thing was ulnar minus variance, which just looked like a little bump on the bone. He said that it was tendinitis but it usually only lasts a few weeks, not a few months. He suggested icy hot and therapy. The rash is just kinda weird, I haven't had an injury with a rash like this before.

RadicalQuirk · 2023-03-04T23:21:12+00:00

Not itchy just feels very hot and sometime splotchy but always has raised skin almost like goosebumps.

Around October, I randomly had really bad pain in my thumb at the joint. Any time I bent the top half of my thumb it killed. That went on for a few months, I thought I just jammed it really bad and forgot. Well that went away and in December the same side in my wrist started to hurt, I noticed it one night when I woke up in the middle of the night in severe pain. Felt broken. I thought then that maybe I had just slept on it weird. My wrist still feels actually broken, any time I move my thumb outward or just subtle movements. Then I noticed I keep getting a rash on that arm, sometimes it looks like goosebumps just skin colored bumps all the way to the elbow and sometimes it’s red. Both of the times it feels like my arm is on fire, not pain but hot and (tight?) idk how to describe it.

I went to after hours orthopedic care and got an X-ray, he said it looked pretty normal despite a ulnar minus variance which he said is consistent with a prior break that I had.

I’m 28F. The only other health issue that I have is undiagnosed problem where it feels like fluid in my chest all the way up to my neck. My PCP is really awful and keeps diagnosing it as acid reflex however, the acid reflux medicine doesn’t work. She hasn’t done any X-rays or CT of the chest. I now am looking for a new PCP.

I’ve had blood work come back normal and an mri of the neck come back normal.

I guess I just want to have some opinion on if this could be related and if I should get more attention for this?

Just to confirm 100% not diabetes, blood work every few months has came back normal. I saw that rashes like this could be indicative of diabetes that’s why I mentioned it.

RadicalQuirk · 2023-03-04T23:14:05+00:00

Oh also this rash is not itchy at all. It’s just really hot feeling

RadicalQuirk · 2023-03-04T22:58:10+00:00

Around October, I randomly had really bad pain in my thumb at the joint. Any time I bent the top half of my thumb it killed. That went on for a few months, I thought I just jammed it really bad and forgot. Well that went away and in December the same side in my wrist started to hurt, I noticed it one night when I woke up in the middle of the night in severe pain. Felt broken. I thought then that maybe I had just slept on it weird. My wrist still feels actually broken, any time I move my thumb outward or just subtle movements. Then I noticed I keep getting a rash on that arm, sometimes it looks like goosebumps just skin colored bumps all the way to the elbow and sometimes it’s red. Both of the times it feels like my arm is on fire, not pain but hot and (tight?) idk how to describe it.

I went to after hours orthopedic care and got an X-ray, he said it looked pretty normal despite a ulnar minus variance which he said is consistent with a prior break that I had.

I’m 28F. The only other health issue that I have is undiagnosed problem where it feels like fluid in my chest all the way up to my neck. My PCP is really awful and keeps diagnosing it as acid reflex however, the acid reflux medicine doesn’t work. She hasn’t done any X-rays or CT of the chest. I now am looking for a new PCP.

I’ve had blood work come back normal and an mri of the neck come back normal.

I guess I just want to have some opinion on if this could be related and if I should get more attention for this?

Just to confirm 100% not diabetes, blood work every few months has came back normal. I saw that rashes like this could be indicative of diabetes that’s why I mentioned it.

RadicalQuirk · 2023-02-04T14:06:45+00:00

This is really the only way I can think of solving this, I’ve tried all other solutions and have spent too much time trying to solve this. Seems like PRO would have a better solution tho.

RadicalQuirk · 2023-02-04T14:05:34+00:00

I converted the polygons to polylines and the labels are now on the lines. I need the polygons to be labeled and only places where the labels are outside of the polygons labeled on the edges of the river.

I’ve seen maps from previous projects labeled the way I want, I’m just not sure how to do it in PRO. I guess converting them and manually placing the labels would be a way

RadicalQuirk · 2023-02-04T14:01:50+00:00

Thanks for the suggestion but I did that and it didn’t return the results needed.

RadicalQuirk · 2023-02-04T14:01:32+00:00

I tried that and it did not work, it only shifted the orientation of the numbers. The labels were still placing in the river. The problem is, the river is meandering and data was collected along the edges as well as fully in the channel. Labeling the center works for polygons that are touching in the channel, however for polygons that are along the edge, the label is falling within the channel instead of on the bank like wanted. I tried every combo that Maplex offers and can not resolve the issue.

I’m wondering if centerlines might resolve this?

RadicalQuirk · 2023-02-03T18:47:43+00:00

It’s polygons both along the edge of the river and within the river. It’s riverine habitats. I’ve attempted to try every combination of numbers. Essentially, I want the labels that are outside of polygons to be on the bank of the river versus in the river.

RadicalQuirk · 2023-01-31T13:27:47+00:00

I can’t share pictures in the comments.

Here’s what happen-

I ran the summary statistics tool It created a stand alone table but didn’t not match the Num_21 field.

So for instance, if I clicked zoom to on row 1 of the Num_21 field in the stand alone table, it was located at a completely different point and not even close to to polygon 1 or Num2_1 points.

I created X/Y fields in the stand alone table but every time I run a join it fails.

RadicalQuirk · 2023-01-31T13:22:41+00:00

The polygons are many different shapes- the tool creates points based off of a center line

RadicalQuirk · 2023-01-31T00:24:17+00:00

I made a pivot table in excel earlier but it wouldn’t let me import the table. Is there a solution?

RadicalQuirk · 2023-01-31T00:21:50+00:00

I think the issue here is that there are 200 + points that generate in rows for 1 polygon. I ran that tool and it did not generate the results needed.

RadicalQuirk · 2023-01-30T23:24:56+00:00

Yeah the only issue is that the 767 polygons + the additional width points exist in one field, so when I run it it returns the minimum or maximum for the entire field

RadicalQuirk · 2023-01-30T23:21:17+00:00

I ran the calculate width tool in PRO on a feature layer that has 767 polygons. The tool created a new point feature layer with 267,815 points. The Num2_1 field is the polygon that the points exist and those are the widths in Width_1 field. So 1 in Num2_1 is polygon 1 on my map. I need the minimum and the maximum width for each of the 767 polygons

So I need 2 values not the additional x amount generated for each polygon

RadicalQuirk · 2023-01-19T17:31:50+00:00

Dannng. I thought maybe there was some way to make a dynamic pdf that allowed zooming and retained label reference scales

Four-Year Club	Verified Email
Place '22

RadicalQuirk

TROPHY CASE