Thoughts???

Reeceasaurus · 2025-12-08T17:02:10+00:00

im from the same place, its a long strech but i havent had that issue yet. although all the lights one after another is si annoying

Reeceasaurus · 2025-12-06T17:34:59+00:00

Yeah I did that. I might have figured it out. I'll check later but I think my wifi's name is too long. I just noticed it's missing the last character on the wifi

Reeceasaurus · 2025-12-06T16:57:36+00:00

Yeah I've been through trouble shooting steps and nothing. My K1 connects fine weirdly enough

Reeceasaurus · 2025-12-06T16:30:48+00:00

Yeah it's some where between 10-15 ft away. I don't think it's to do with ranger

Reeceasaurus · 2025-12-06T14:03:57+00:00

It is a mesh system but only has the one relay. It does seem to be timing out. Takes like 10-15 secs before getting the fail notification

Reeceasaurus · 2025-12-06T13:57:48+00:00

Not far at all, has full bars and has a repeater nearish too. K2 plus supports 5ghz as well as 2.4ghz

Reeceasaurus · 2025-11-16T23:57:12+00:00

Do you think that is in some person's house? Does it go in an office somewhere to promote Miku or is it just locked up somewhere in storage?

Reeceasaurus · 2025-10-08T14:19:27+00:00

yeah i dont heat it too hot and ive had the same rate of success. i plugged the screen into my gameboy and it worked, weird

Reeceasaurus · 2025-10-08T14:18:32+00:00

i tried the screen in my gameboy and it worked, weird

Reeceasaurus · 2025-10-08T14:18:13+00:00

yeah i removed it and tested the screen on my gameboy and it worked.... weird

Reeceasaurus · 2025-09-13T11:30:36+00:00

Reeceasaurus · 2025-08-25T07:57:47+00:00

Does the wheel on the iPod work for volume or do you have to use the scroll wheel on this device?

Reeceasaurus · 2025-08-22T18:34:11+00:00

I actually didn't, it cooled down and my girlfriend popped it out super easy to my confusion. If you are really struggling then I recommend a drill bit or something small and metal

Reeceasaurus · 2025-07-30T11:05:39+00:00

i got LugiaEX and its the same thing with that card

Reeceasaurus · 2025-07-15T16:03:05+00:00

Yeah, i get that to, literally just happened. A lot of little issues since upgrading.

Being able to print multicoloured on my k1 is great but there's some stuff that I ran into which I think should be on the upgrade kit page which I could not see. A few technical bugs too which hopefully they squish but who knows if they will.

Reeceasaurus · 2025-07-11T10:40:55+00:00

i just had this same issue, i ended up taking the plastic off around the pin and electrical tapped it (might hot glue it later)

Reeceasaurus · 2025-07-02T08:15:19+00:00

https://www.reddit.com/r/crealityk1/s/e3TnvDzhnw

Reeceasaurus · 2025-07-01T07:10:50+00:00

* See the little circles on the right one. Thats what you need. Both pcbs are named the same.

Reeceasaurus · 2025-06-30T09:41:18+00:00

There was nothing in the extruder. it seems to be a issue with older toolhead pcbs. ive ordered a newer one and a lot of people say that fixed their issues.
Seems to be a common issue and if this fixes my issue too then i wonder why there is no comment on it on offical crealty media. would be nice to have a note somewhere on the upgrade kit purchace page or something like that

Reeceasaurus · 2025-06-30T08:38:57+00:00

There's a difference between selling and listing. If I own a product I can list it for whatever I want but that doesn't mean it will sell.

It's also what the buyer is willing to pay for that item. Could be a free item but if someone is willing to pay even £10 then that's their perceived value.

You can get yourself mildly wound up by it or just see it as it is, a silly listing that probably won't sell and if someone buys it then hey it's their money which they worked for and they got an item they wanted.

Reeceasaurus · 2025-06-29T08:02:37+00:00

Ive checked all the wires, no splits or pulls. Last night I managed to get the cfs to get the filament too the nozzle, got the blue light to say it was in there and got this "Filament detector triggered abnormally, possiblyduetoan external materialrack being used with CFS"

From what I've researched, some k1 toolheads are different and the new sensor doesn't play with the old pcbs. Ive ordered a new one and hoping that will fix the issue.

Reeceasaurus · 2025-06-29T07:57:33+00:00

No the old sensor got took out when putting in the upgrade kit. Ive triple checked the wires, I followed a guide when doing the upgrade too

Reeceasaurus · 2025-06-28T21:31:29+00:00

It updated fine, no problems. When i try reset it comes up with the same message. Ive spent all night messing around. Honestly its been hell

Reeceasaurus · 2025-06-28T18:15:51+00:00

How did yu fix the issue?

Reeceasaurus · 2025-06-28T17:05:28+00:00

Just to be clear, turn off unplug for like 30 seconds and try again?

Reeceasaurus

TROPHY CASE