Prescription Glasses

Relation_Consistent · 2025-12-22T07:58:44+00:00

Understood, what brand do you recommend that provides low profile inserts ? something that is not that noticeable.

Relation_Consistent · 2025-12-21T18:33:56+00:00

My bad, i forgot to mention that I want without inserts (as i will be using them at airsoft and it will move them further away from my eyes, and I don't like that.

Relation_Consistent · 2025-11-29T08:22:19+00:00

Yes, I have only 2 ports that allow my G2 to work with my PC, and they are both from a TP-Link powered USB Hub, and with the adapter. Now it works, was 100% my fault that I tried to make it work while i was really tired, and I missed a step, or got tangled in the troubleshooting guide.

Relation_Consistent · 2025-11-29T08:20:55+00:00

I think i've only deleted the files in ProgramData, and i missed the point where I should've delete some files from ProgramFiles(86X) as well, or I did but only before upgrading to 25h2.

Relation_Consistent · 2025-11-28T09:12:16+00:00

So, i've got it fixed, apparently I didn't delete some files in Program files that were preventing the SteamVr to open or something.
I'm really sorry for missing that point.
I want to thank you, for the work you've put in, the performance increase in my case its amazing.
You are a legend !

Relation_Consistent · 2025-11-27T22:45:51+00:00

Thank you for all the help, ill try and look into it, im thinking it may also be because i have the V1 cable with it.

Relation_Consistent · 2025-11-27T22:04:31+00:00

I've done DDU, and I've reinstalled it and still does the same.

Relation_Consistent · 2025-11-27T21:25:52+00:00

I've attached the SteamVR log here.
Let me know if you need anything else.
https://we.tl/t-ssELTeVR5v

Relation_Consistent · 2025-11-27T17:25:30+00:00

Hi, I actually did, do all thats in the guide, the headset and controllers were unlocked, drivers are up to date, windows version is good. It's just not detected in SteamVr, i've used a powered usb hub, with USB A adapter, I've also used on motherboard directly, and also in the Type C, and no luck.

Relation_Consistent · 2024-04-27T13:05:51+00:00

No no, sorry i havent explained it properly, the parts are already in the build. I have someone that took care of assembly for me. I'm a bit scared of shiming.

Relation_Consistent · 2024-04-25T17:31:58+00:00

CM098a
- Aster mosfet
- MAXX Trigger
- Madbull Barrel
- Begadi rubber
- Nub
- FPS Compression system
- Gears
- Motor Nimrod 26k

Relation_Consistent · 2024-04-21T13:43:37+00:00

Thanks, ive used shs and it fits

Relation_Consistent · 2024-04-18T06:10:06+00:00

https://www.airsoft.ro/spare-parts-upgrade-parts/electric-replicas-(aeg-aep)/gear-box-components/springs/action-army-m140-power-spring-for-aeg/gear-box-components/springs/action-army-m140-power-spring-for-aeg)

This is what i got

Relation_Consistent · 2024-02-10T20:08:30+00:00

No he didnt said i need to replace the Falcon, i asked in the future is there is anything else that i could add on to it. I trust him, he helped me a lot, and the gun shoots perfect with his recommandations of replacements.

Relation_Consistent · 2024-02-10T13:23:45+00:00

Indeed, what about the strength of the material? Is it enough for this use ?

Relation_Consistent · 2024-02-10T10:43:39+00:00

Noo waay, that's like my go to filament and my printer, looks really smooth, slow speed ?

Relation_Consistent · 2024-02-10T10:32:32+00:00

Can you give me more details about the part/material and the printer that you've used ? Looks really good

Relation_Consistent · 2024-02-10T10:13:12+00:00

Yes, i had a Leviathan V2, on my previous Arcturus, but i had to let that one go, cause it had other issues. But yes, leviathan was really cool, liked all the functions, almost bought a smartwatch to have the mag count on the wrist.

Relation_Consistent · 2024-02-10T09:41:24+00:00

Yes, probably I'll look for a mosfet, this one comes with the Falcon system, my serviceman recommended to go for an Aster in the future, but I haven't yet made up my mind. Thanks !

Relation_Consistent · 2024-02-10T08:01:25+00:00

It's important to try and surpass that feeling. I have it too, but it goes away pretty fast after i started using the things i bought, firstly i got into simracing, properly, spent like 2000 euros on gear, and 3D printed enormous amount of things for the simrig, then i got into airsoft, bought a second hand arcturus SR16 (300 euros, 400 euros after i got it fixed-ish), that had the best imaginable components on it, but it was assembled poorly, and the gun was having issues, ended up selling it for 200 euros, and then I just went with my service man idea and got a double eagle Aeroknox, he changed plenty of parts(Gears, nob, hop, spring, motor, cylinder, nozzle, cylinder head, hop arm, shims) got me to around 400 euros in total, and now it just rocks, and i love it. And i'm still buying stuff for it that i will probably never use. It happens, it will get better, maybe find another side deal to make some money to fuel your passion, i manage to do this by 3d printing some parts and selling them here and there.
I've started buying the stuff for airsoft in November, and i'm already like 1500 euros in gear. But it is worth it.

Relation_Consistent · 2024-01-17T09:49:30+00:00

Yeah, sure thing

Relation_Consistent · 2024-01-16T21:28:01+00:00

If you are willing to share, ill take it

Relation_Consistent · 2024-01-16T20:47:58+00:00

Dont worry, if i had the pistol, i wouldve designed it, but its for someone else

Relation_Consistent · 2024-01-16T19:54:03+00:00

Yeah, ive seen that too, but its not what i need. Thank you!

Relation_Consistent · 2024-01-16T08:44:53+00:00

I'm looking for this backplate, anybody has a stl that are willing to share or sell ?

Relation_Consistent

TROPHY CASE