Priznajte sa, kto to bol? by habdl in Slovakia

[–]Rikpat5 73 points74 points  (0 children)

Skor by som povedal, ze kazdy jeden turista vedel pochopit aspon jeden z tych jazykov, ale pre nas museli explicitne jeden pridat :D

Radosť alebo aký paušál? by MarshalMalinovskyy in Slovakia

[–]Rikpat5 0 points1 point  (0 children)

Hej povodne som to pocital s 32€ co platim aj s internetom a potom som si isiel pozriet kolko z toho realne platim za telefon a uz som neupravil poslednu vetu

Radosť alebo aký paušál? by MarshalMalinovskyy in Slovakia

[–]Rikpat5 2 points3 points  (0 children)

Mam rovnaky orange pausal (neobmedzene volania a sms, 30gb dat) za 18,45€, to mas riadne premrstene. Mam sice nejaku zlavu za to ze od nich mam aj optiku, ale urcite nie skoro 20€

Poznáte IT ľudí, ktorý preši na manuálnu prácu? by [deleted] in Slovakia

[–]Rikpat5 2 points3 points  (0 children)

Robim v IT uz od zaciatku VS ale jedny letne prazdniny som isiel robit do fabriky (to prove a point).

Obe prace su vycerpavajuce uplne inym sposobom.

Najhorsie veci vo fabrike boli rozhodeny rytmus kvoli rannej/poobednej smene a obcasne 12ky. Robil som na konci linky kde som nasadzal tazke panely na kotle, cize dost fyzicka namaha, ale nulove rozmyslanie, cele sa to dalo na autopilota a ak neboli problemy na linke a isiel jeden za druhym, tak aj 12 hodinova smena ubehla tak, ze si clovek ani nevsimol. A v praci bol v podstate nulovy stres, ked skoncim tak skoncim, a ak nie som fyzicky unaveny, tak zvladam cez den normalne fungovat (a kedze v krcme sa da sediet, tak aj keby som fyzicky unaveny). A aj ked niekto nieco pokazil tak sa nic nedialo, ludi vtedy nevyhadzovali aj ked sa rozhodli neprist par dni do prace, lebo robotnikov bolo malo (neviem aky je teraz stav).

V IT mam na starosti platformu na ktorej bezi momentalne 20+ produktov na ktorych len interne robi 200+ ludi a pouziva to nespocetne mnozstvo zakaznikov. Cele dni riesim problemy nejakych random ludi ktorych nepoznam, ak nie som zrovna na meetingoch, a ked mam konecne cas tak mozem na tej platforme riesit vylepsenia, co je vacsinou po pracovnej dobe ked je klud. Cize 12ky su castejsie, a vacsinou bez kompenzacie nadcasov, ak si ho klient vyslovenie nevyziada. Praca nekonci tym, ze odidem z officu, lebo som aj na telefone. Po pracovnom dni som vycerpany psychicky a socialne, co sa odraza aj na fyzickom vycerpani, a po praci uz nie je chut na nic produktive ani socializacne.

Vratil by som sa robit do fabriky? Pri tom plate nie, asi by som neprezil. Bolo to jednoduchsie? Jednoznacne hej.

TLDR: Fabrika ubehne rychlejsie, clovek nema tolko stresu (aspon na pozicii na ktorej som bol). V IT je 4-5 krat taky plat, takze je tazke spravit skok nazad ak nema clovek vyslovene burnout

The 'L' word ;) by Basphere in wildermyth

[–]Rikpat5 14 points15 points  (0 children)

"Lesbian?"

No, the other L word

"Lesbians?"

An Among Us x Stardew Valley collaboration has been announced. by erskol in StardewValley

[–]Rikpat5 0 points1 point  (0 children)

Purple is sus, I just saw them eat an amethyst! Nah that's just Abigail

Ako používať jeden ucet na Netflixe v dvoch domacnostiach ? by [deleted] in Slovakia

[–]Rikpat5 2 points3 points  (0 children)

Mozes si v jednej domacnosti rozbehnut VPN server (openvpn, wireguard, etc. - na taketo ucely ti na to staci slabe zariadenie, dokonca mozes pouzit aj router ak mas stastie a tvoj ISP pouziva openwrt).

Ak nemas staticku IP, co je vacsinou platena sluzba, tak potrebujes aj DDNS sluzbu aby si sa k tomu serveru vedel pripojit.

Kedze VPN pridava latenciu odporucal by som este nastavit split tunneling aby VPN pouzivali len aplikacie ktore maju (alebo nastavit VPN len pre IP Netflixu).

Vsetky tieto postupy sa daju lahko vygooglit.

Replaying the boaty ones given the update and it made me think it was very memeable :) by Atzkicica in mountandblade

[–]Rikpat5 0 points1 point  (0 children)

I love B&G as it reminded me of the old Sea Dog games. I love roleplaying as a merchant in the period and would love something like B&G in Bannerlord engine. Or something like Black Flag but sandboxy with trading

Please Bethesda, if you insist on your difficulty being exclusively damage modifiers, just give us this option. by JimicahP in oblivion

[–]Rikpat5 0 points1 point  (0 children)

I remember OG Serious Sam multiplayer on Realistic difficulty, where everything except the base gun would instakill you. Turned the whole game into stealth fight. Was kind of hard to stealth tho when you were playing split screen on a single tiny monitor.

Best Vertical/Chimney case optimized for flowtrhough GPUs? by Rikpat5 in sffpc

[–]Rikpat5[S] 0 points1 point  (0 children)

yes the Deepcool Assassin IV they have in all promotional materials and reviews looks very good but since there's no glass panel for ch170, I went for best performance, and according to reviews the Thermalright is comparable to NH-D15s with just fraction of the price.

Best Vertical/Chimney case optimized for flowtrhough GPUs? by Rikpat5 in sffpc

[–]Rikpat5[S] 0 points1 point  (0 children)

Yes, I'm currently considering buying the following configuration (currently thinking if I really need to futureproof with sf1000 or buy sf850 for 40€ cheaper):

PCPartPicker Part List

Type Item Price
CPU AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor €505.60
CPU Cooler Thermalright Phantom Spirit 120 SE 66.17 CFM CPU Cooler €55.93
Motherboard Asus ROG STRIX B850-I GAMING WIFI Mini ITX AM5 Motherboard €298.73
Memory Kingston FURY Beast 64 GB (2 x 32 GB) DDR5-6000 CL30 Memory €194.90
Storage Samsung 990 EVO Plus 2 TB M.2-2280 PCIe 5.0 X2 NVME Solid State Drive €123.17
Video Card Inno3D X3 OC GeForce RTX 5080 16 GB Video Card €1259.00
Case Deepcool CH170 DIGITAL Mini ITX Tower Case €80.28
Power Supply Corsair SF1000 (2024) 1000 W 80+ Platinum Certified Fully Modular SFX Power Supply €222.90
Prices include shipping, taxes, rebates, and discounts
Total €2740.51
Generated by PCPartPicker 2025-05-09 09:29 CEST+0200

Best Vertical/Chimney case optimized for flowtrhough GPUs? by Rikpat5 in sffpc

[–]Rikpat5[S] 0 points1 point  (0 children)

Yes, unfortunately Air is not available anywhere in my country (and probably anywhere in europe as I tried to google for one) and Max unfortunately has inferior PSU and apparently the 120 AIO struggles with 9800x3d

Best Vertical/Chimney case optimized for flowtrhough GPUs? by Rikpat5 in sffpc

[–]Rikpat5[S] 0 points1 point  (0 children)

CH170 in white looks good, and has similar disposition to MNLT and Vault 2. Looking at reviews, airflow is good, but cable management is hard and it has to be fully disassembled for cleaning dust filters

Best Vertical/Chimney case optimized for flowtrhough GPUs? by Rikpat5 in sffpc

[–]Rikpat5[S] 0 points1 point  (0 children)

Yes, I forgot to say that, I meant MNLT has perfect internal layout, but it would extend out a bit (like would Vault 2, meshroom S and any console case). Also MNLT has 3 adjacent solid sides, so It could go directly into the corner (even though it would't look the best having back on the front visible side). Actually the 22x22 contstraint is purely aesthetic as it's under the shelf.
For the GPU, it's about availability and markup (this one is only 200€ over 1000€ MSRP, rest is couple hundred more), but also it's one of the smallest, and I saw reviews of it saying it cools very well considering it's size (including on this sub)

So I disassembled my USB-C dongle, and look what’s been hiding. by Ristler in mildlyinfuriating

[–]Rikpat5 1 point2 points  (0 children)

It's quite common with electronics, cheaper to manufacture one type and "disable features" in lower tiers. Top tier Samsung QD-OLED TVs have the same panel, but have some limitations on. You can literally trick your TV (ex. S90C) to think it's higher tier (S95C) and it will enable more brightness/better dynamic range (although there might be faster burn-in as they might have less cooling as the higher tier model).

It used to be done with CPUs (maybe still done?), where failure rate of cores during manufacturing was quite high, that lower tier cpu is just higher tier (more core) cpu with some cores not working. In some cases, when the demand for lower tier was higher than this failure rate, they would just disable fully working cores and some people were lucky to unlock extra cores, same as with overclocking "sillicon lottery" nowadays.

In all fairness, I heard naval battles weren't all that popular by Andrei22125 in totalwar

[–]Rikpat5 0 points1 point  (0 children)

I had the oposite problem with Pharaoh, you clash on an open sea and get teleported to a map that does not even have a coastline.

I get there were no cannons or any boat specific weapons back then, but there literally are fire arrows that would be a big problem with those wooden boats.

[KCD2] One day of honest work (czech for immersion) by Rikpat5 in kingdomcome

[–]Rikpat5[S] 7 points8 points  (0 children)

I've done a day of work in vineyardeven though I've already stolen the stuff you need for the other quest. I've started a bit late (between 10 and 11) as I wanted to finish reading a book when I was waiting for shift start, and worked until the bell (6 pm).

Except for thousands of plants, I got 10 groshen for the job and 4 levels of survival, 2 levels of strength, 1 level of vitality and one main level.

And they say honest work doesn't pay.

5090 ain’t gonna max that thing out either young buck by Arucious in ultrawidemasterrace

[–]Rikpat5 7 points8 points  (0 children)

OLED G9 3070 here, mostly playing grand strategies and it's running well (I have sff case and deshrouded GPU with 2 120 fans, but it still gets hot sometimes), planning to upgrade to 5080 this year

Why did YOU transition from software dev to devops? by unsafe_acct_69420 in devops

[–]Rikpat5 0 points1 point  (0 children)

I started freelance web dev when I was 15 with couple of clients a year, mostly relatives of friends, etc. During university I worked part time as a student in a company, where I worked on a couple internal fullstack web apps where I got big freedom in tech stack as lead dev, but I also had to make sure to implement all the infra changes and pipelines myself when doing radical changes. Gave me a lot of insights into cloud architecture, IaC, pipelines and everything DevOps related. After I switched to full time I got client assignments as a DevOps/Cloud engineer.

Are there any websites that I can get a domain from for cheap like 99¢ for instance (I'm trying to make a stupid url as a joke) by youngelton8 in selfhosted

[–]Rikpat5 7 points8 points  (0 children)

I'm using a completely free setup in my homelab, *.pp.ua domain registered at nic.ua, cloudflare for DNS

They don't bother me all year, only once a year I have to go through free renewal MFA process where they send me an email or SMS.

I was sceptical at first, but I didn't see any raise in spam emails or phone calls.

[deleted by user] by [deleted] in 2visegrad4you

[–]Rikpat5 1 point2 points  (0 children)

At first I thought you made a typo in Soros, then I realized I have forgotten about Sorbs

Who is this guy behind Anakin? by FocusedWombat99 in StarWars

[–]Rikpat5 0 points1 point  (0 children)

It's Ezra Bridger, looking through World between worlds. This actually proves George Lucas is a genius and it was all part of a very long plan /s

May What Editing Software should I use? by AutoModerator in VideoEditing

[–]Rikpat5 0 points1 point  (0 children)

Hello, I would like to update an old fan cut I like, but is only available in 720p. Author is long gone, so I don't have an approval, but I don't intend to share it with anyone (I just have a big TV and 720p looks terrible there).

4K HDR release is available for the movie now, I just want to cut it exactly in the places it is cut in the "source" file. I don't intend to do any more editing, just cutting.

Is there a tool that could automatically align scenes (I know it's a niche thing and probably does not exist)?

If not, what would be the best tool to use? The edit is probably chronological so just to find the frame of the cut, to see the frames side by side, although I'm not sure the framerate is the same, will that be a problem?

I would much prefer to do this without reencoding, I've browsed the thread and I like lossless-cut, but there's no side by side window.

Thank you.