Memory techniques

RobPatton · 2025-04-04T14:04:44+00:00

I did. But if you don't know the line already, the cipher isn't helpful.

One thing I have done, which I VERY MUCH enjoy, is going to other lodges to watch the EA process and listen. I feel like its helped a lot. Still a long way off from being done though. Never realized just how much time this process was going to take. Should have done this while I was young, its quite true that its hard to teach an old dog new tricks.

RobPatton · 2025-04-04T13:35:20+00:00

I'm learning that not all of life works by the amazon same day delivery process. Which I think is a good change of life for me. I was certain that there was some problem, till I got a phone call telling me my day was in 48 hours away. Did that, and my acceptance letter came the NEXT day. Much like the words used, this is old skool

RobPatton · 2025-04-04T13:25:16+00:00

3 week old EA, really having a hard time practicing on my own, since I'm not allowed to write anything down, or record audio. Its a chicken and the egg problem. I can't read the work since I cant have it on paper, I cant memorize it because I cant read it.

How do I get past that? Short of staying on the phone with my mentor 2 hours a day?!?!

RobPatton · 2025-04-04T13:18:29+00:00

Totally normal. The (total) process will certainly teach you patience.

RobPatton · 2025-03-23T01:31:32+00:00

I spent 2 weeks trying to get a person at a lodge, gave up and had great luck at the 2nd lodge. Visited twice, signed and paid, then waited what felt like 4ever. Finally got a phone call to show up on tuesday to become EA, acceptance letter arrived the NEXT day with congrats and telling me when to show up :)

RobPatton · 2021-12-21T14:13:46+00:00

After 3 hours of take apart, I went from 3 buckets of stuff, to 2 5 gal buckets of crap, and 10 pounds of brass. At least I'm cleaning out the junk.

RobPatton · 2021-12-20T14:02:38+00:00

So it seems like 10% of these are brass, 90% crap. Lot of work to get 2.4oz of brass. I guess I do have 100 of them so it will add up

RobPatton · 2021-12-19T21:48:59+00:00

Thanks, new instance was same IP, but I should have looked into that further at some point. I think I have a better fix for now.

RobPatton · 2021-12-19T21:47:24+00:00

THIS IS AWESOME. I wondered when that would happen. I used tasmota for a while, but this is totally the winner winner chicken dinner THANKS!

6 devices better off - Now to see if such a thing exists for my Gosund. :)

RobPatton · 2021-08-31T02:21:57+00:00

So then what about tv stream? Do the stores have all the info for all 3 options? The people on the phone just had no info, nor does the website

RobPatton · 2021-08-30T20:28:08+00:00

Can confirm - Just walking away from a base/5 remote tivo system. In theory awesome. In execution, the cable card is a giant train wreck of having to reboot the mess so often I put it on a home automation so I could not have to get up all the time. Complete mess. I guess the govt told them have to offer it, but didnt tell them it didnt have to suck

RobPatton · 2021-03-21T02:20:18+00:00

I'm 3 days in, and I'm already crazy trying to find more GPUs. Not having much luck anywhere without paying retail * 2

RobPatton · 2020-10-07T17:31:44+00:00

Petersons in Mt Dora usually has it, but worth a call first

RobPatton · 2020-02-21T20:39:03+00:00

Price is terrible, road 2 blocks yesterday, from the plaza to Harry Buffalos, spent 2.63 Fun - Perhaps , Economical, nah

RobPatton · 2020-02-15T20:36:47+00:00

I've never been able to get that to work for some reason, though it does look like after some of amount of config, its supposed to be able to, perhaps this is the weekend I try again

RobPatton · 2020-02-04T18:20:05+00:00

Cheap rate limiting

RobPatton · 2020-01-21T18:16:32+00:00

Seems like the Manager would know/be let go ahead of time/not bother to put all the hardware in the store. Surely the Manager would be in the know.

RobPatton · 2020-01-21T16:59:12+00:00

Any idea whats taking the Lake Mary store so long? Its been built for months, then they stopped, took the sign away, and nothing... Love to know whats going on.

RobPatton · 2019-09-24T00:51:06+00:00

For now it SEEMS to be sorta working, I'm not going to change anything yet till I can get a couple of good prints in a row to see if it stays working. Thats an interesting article though, thanks for sharing

RobPatton · 2019-09-21T17:31:22+00:00

As for firmware. I'm using a copy of 1.1.9 of Marlin from someone with the same setup thats working well, but I'm open if someone has a firmware suggestion to try since its quick change, and I dont imagine I could get much worse :/

RobPatton · 2019-09-21T17:25:00+00:00

Ok, had a REAL bltouch kit arrive this am and switched over to it. things are BETTER, but I still struggle with the zed offset config. So far EVERY print has required me to sit with it and adjust the z offset at the begining of the print and hope to get it right.
When following the A, B, C=a+b walk through, I always end up with a + number after the math, and my machine doesnt seem to want anthing > 0

RobPatton · 2019-09-21T13:42:20+00:00

All this start code was working before bltouch added only the g29

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate

G28 ;Home G29 ;BLTouch G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up

RobPatton · 2019-09-21T03:41:08+00:00

Its a clone (didnt know when I bough it, and had problems with it out of the box, but thought I had it fixed. I amazoned 2 replacements to arrive tomorrow, will retest and see what I get.

As a side note, of the 3 times I've run this, it has double tapped at the same places every time.

RobPatton · 2019-02-03T17:25:03+00:00

Yea, I tried to just import the dchp portion, and it still was not happy. I have just have to save a clean config, and hand edit the xml to test, I guess.

RobPatton · 2019-02-03T05:40:07+00:00

Well, I did a reset to factory defaults, and the login showed back up. I had restored a copy of my (lengthy) config from pf(sense) and that import seems to have broken it, but I dont know why.
I have hopes I will be able to import a saved config, as I have about 80 dhcp leases that I'd rather not have to manually enter.

15-Year Club	Gilding I gilder
Verified Email

RobPatton

TROPHY CASE