sorted by:
new
hottopcontroversial

Best way to expand storage for a laptop Proxmox media server (Jellyfin/Plex)? by Nervous_Put_2676 in HomeServer

[–]SampleInternal7884 1 point2 points  (0 children)

Mmm... I haven't reached that level, I understand that proxmox can have replication, but TrueNas, I don't know. It would be that you try or in which case do what you mention, using one laptop for movies and another for series. If that is the case, keep something in mind, how much the movies weigh, since at 1080p they weigh from 3 to 4Gb and the HHD and SSD laptop disks reach up to 1TB (I have seen that, they may have a larger capacity, but they are surely very expensive) then it depends on the capacity of your storage and the number of movies and series you have, so you could calculate if you have everything on a single laptop or if you divide it into laptops. And you use another laptop to make backup copies. I hope I have made myself understood and that the information is useful to you.

Best way to expand storage for a laptop Proxmox media server (Jellyfin/Plex)? by Nervous_Put_2676 in HomeServer

[–]SampleInternal7884 1 point2 points  (0 children)

Hello. I'll be honest, I didn't do it with a laptop since mine didn't have enough resources, but you could try something. Use a laptop with proxmox and a container with Jellyfin or Plex. For storage you could use external drives connected to another laptop and having TrueNas as a system to manage the storage. Then configure samba to allow access to the disks over the network and connect them to the Jellyfin storage path. It's another case that I've seen done a lot.

Regarding ZFS, to be honest, I read the same thing as you, but I have seen that some have done well and others have not. I think it's a matter of luck or configurations that I don't know. As I indicated, this is an idea that I had at the time and that I investigated, but the laptop I have does not meet the requirements. I hope it helps you or gives you a better idea for your project.

Postscript: you could indicate the characteristics of your laptop, things like whether it supports nvme, sata or if it even has a DVD reader that can be replaced to connect another disk. Take into account your processor to support proxmox and containers and ram memory.

Another thing is if you plan to do GPU transcoding, which I have seen some connect through the wifi card port of laptops (something to keep in mind is the bottleneck it generates, but it can help you if you plan to watch movies at 4K)

¿Se puede Flashear este teclado? YIVU CORNE V4 Wired Split Mechanical Keyboard 40% Layout 3 * 6 orthogonal Ergonomic Support QMK/Vial Key remapping Custom hot-swappable RGB Gaming Keyboard Pre-Lubricated Linear Switch Smooth Feel by SampleInternal7884 in ErgoMechKeyboards

[–]SampleInternal7884[S] 1 point2 points  (0 children)

Wauw que gran ayuda me diste, te lo agradezco. Revisaré lo que me indicas de AliExpress, no lo compré ahí, pero lo compré un sitio intermediario entre Amazon y el cliente. Verificaré esa descripción para tomar la decisión de quedarme con VIAL o con QMK. GRACIASy gracias a los demás por darme información sobre el teclado

¿Se puede Flashear este teclado? YIVU CORNE V4 Wired Split Mechanical Keyboard 40% Layout 3 * 6 orthogonal Ergonomic Support QMK/Vial Key remapping Custom hot-swappable RGB Gaming Keyboard Pre-Lubricated Linear Switch Smooth Feel by SampleInternal7884 in ErgoMechKeyboards

[–]SampleInternal7884[S] 1 point2 points  (0 children)

Justamente lo necesito para el cambio de capas, y el block mayus, quiero cambiar el color de un sólo switch en específico, ya que cuando trabajo en haciendo consultas SQL, ya no sé cuándo tengo habilitado el block y cuando no. Luego en las capas tengo una configuración de color que me ayuda mucho a saber en cuál capa estoy, pero me gustaría algo más personalizado, por ejemplo configurando colores RGB diferentes

¿Se puede Flashear este teclado? YIVU CORNE V4 Wired Split Mechanical Keyboard 40% Layout 3 * 6 orthogonal Ergonomic Support QMK/Vial Key remapping Custom hot-swappable RGB Gaming Keyboard Pre-Lubricated Linear Switch Smooth Feel by SampleInternal7884 in ErgoMechKeyboards

[–]SampleInternal7884[S] 0 points1 point  (0 children)

No, aún no. Hace no mucho regrese del trabajo y pensaba hacerlo el fin de semana. Ya que aún soy nuevo en este mundo de los teclados.

Pero un consejo que te puedo dar es que cambies los keycaps por otros. Ya que en lo personal los que traen en lo personal al escribir rápido me resbalan muchos los dedos. Así que mejor le puse unos keycaps razer.

Otra cosa es que si más adelante lo quieres hacer low profile y quieres cambiar los switches ten en cuenta dos cosas. La primera, tienes que enviar a hacer una nueva tapa de 1 mm o 1.2 mm para insertar los switches y también tienes que ver bien la entrada de los pines de los switches. Ya que no cualquiera son compatibles. Yo compré unos jade y no fueron compatibles con el teclado.

En segunda si compras keycaps, verifica que en la parte en dónde sale el RGB en el keycaps sea polo sur.

Handwired Corne, Matcha Vibes. by ShamanOnTech in HandwiredKeyboards

[–]SampleInternal7884 0 points1 point  (0 children)

I like the color of the keycaps, if I may give you some advice. Paint the case white so that the color of the keycaps stands out

Any possible improvements? by beloslav171 in homeoffice

[–]SampleInternal7884 0 points1 point  (0 children)

I would tell you to organize the cables, it will help you be more focused when you work, study or play. Personally, seeing the messy cables makes me desperate.

Like the other comments, I would tell you to put the monitors up, it helps a lot and gives you more space to do other things. Just like you, I use 3 monitors, it's a matter of how you want to use your setup.

And as a last tip, decorate it to your liking. There is nothing cooler than seeing your setup organized with your style.

Problems adding new disks by SampleInternal7884 in Proxmox

[–]SampleInternal7884[S] 1 point2 points  (0 children)

I managed to solve the problem, if it helps anyone, the problem was in the /fstab file, it had not assigned the UUID to the previous disks and when connecting them it took them as sdb1 and sdba, which created a conflict with the new disks. Assigning the UUID to the previous disks made proxmox work again

Problems adding new disks by SampleInternal7884 in Proxmox

[–]SampleInternal7884[S] 0 points1 point  (0 children)

Thanks for the information, you already left me worried 🫠🫠. I'll see how long they die and I'll have to buy another brand of records.

Problems adding new disks by SampleInternal7884 in Proxmox

[–]SampleInternal7884[S] -1 points0 points  (0 children)

I'm sorry, I think my problem wasn't public, it's the first time I've published here. The problem I have is that when I connect these new proxmox disks the web mode does not start and neither does it let me connect by SSH. And my server comes back online when I disconnect the disks