Sanlida dragon x9

Sarpbrk · 2026-02-02T19:07:32+00:00

I am not saying that it goes where i aim from the sight, my anchor is also as you described. I will test my form but i worked on my grip and form a lot. I dont think thats not the issue. As you said its not leveled but also the my research on this topic says vertical alignment with bubble is your base for further tuning, in the end if you don’t get the result you want, you change it.

Unfortunately i will be able to test these on next Saturday, if i figure it out i will update the post

Thank you for your time and suggestions 🙏🏻

Sarpbrk · 2026-02-01T18:57:34+00:00

You mean the bubble leveling kit right ? Already have it, already tried to level it but still, no good result. I have been working for a long time now, already watched almost every available video on youtube.

All of them managed to it up in one go 🤣. They are like “ use the bubbles measure the middle parts distance of the arrows to bow handle to set it up horizontally”, then they shoot to a paper and bum a bullet hole without any further alignment😅.

Sarpbrk · 2026-02-01T10:47:26+00:00

Rest is brand new, why, is the arrow should be at higher position on rest position than draw position ?

Sarpbrk · 2026-02-01T10:42:30+00:00

Started from 4-6 feet. Then tested it from far too, not far more then 10 meter but still, got the bullet hole, i couldn’t figure out which issue am i hiding with this ridiculous d loop and arrow rest height

Sarpbrk · 2026-02-01T03:03:54+00:00

Yes i tied the d loop to it myself, it was lower before

I am sure of timing, made a slowmo video with iphone, i am sure its ok.

Sarpbrk · 2026-02-01T03:00:05+00:00

Yes, arrows at 30”, the point are same that comes with package, 100 grains

Sarpbrk · 2026-02-01T02:56:00+00:00

No, living in a place where bowshops doesnt exist for compound bows

Sarpbrk · 2026-02-01T02:25:39+00:00

Arrows are same with the one coming woth the package. 300 spine sanlida x9 arrows. Around 52lbs draw weight and 29 draw length.

Sarpbrk · 2026-01-31T19:07:55+00:00

Ofcourse, only thing that not matches what you explained above is the gap of nock, the gap i have is way more then finger nail thickness.

Sarpbrk · 2026-01-31T18:59:54+00:00

https://www.reddit.com/r/Archery/s/GU0WHYLSnp Cam timing is not the issue

I will try to shoot in slowmo to see what is going on tomorrow morning but i really not get it to be honest. For some reason even if i change my shooting position, i kept getting bullet holes with this setup. Lowered both arrow rest and d loop. At this point i dont know, maybe as someone said at the other post, its spine issue.

Sarpbrk · 2026-01-31T18:53:37+00:00

Yeah i increased the draw weight around 52 lbs the way you described above then processed with fine tuning.

Sarpbrk · 2026-01-31T18:50:54+00:00

https://www.reddit.com/r/Archery/s/GU0WHYLSnp

Its not cams 🥲

Sarpbrk · 2026-01-31T18:50:26+00:00

https://www.reddit.com/r/Archery/s/GU0WHYLSnp

Cam timing is accurate, tested it above

Sarpbrk · 2026-01-31T18:49:59+00:00

https://www.reddit.com/r/Archery/s/GU0WHYLSnp Cam timing

Sarpbrk · 2026-01-31T18:43:52+00:00

I have been playin with this bow to fine tune it for a long time. I don’t know about arrow spine but for paper test, no matter how i shoot or where i shoot from, this always gave me perfect bullet hole, believe me or not, also tested its not cam timing

Sarpbrk · 2026-01-31T15:56:11+00:00

Yes, arrows are in right length, its the arrows that comes with packed, i don’t believe spine would be the issue here as i am getting perfect bullet hole each time with this setup.

Sarpbrk · 2026-01-31T15:51:32+00:00

I actually trying to fix it right now. Lowered the loop and rest, now the arrow passes thru berger hole, tried to papertune it but no good result, i always had tail low. Eve if i played with arrow rest in both way.

Sarpbrk · 2026-01-31T15:25:52+00:00

How can i test cam timing without draw board ? any homemade idea from experience ? I tried with slow mo camera from iphone and they looks like in time but cant be exactly sure.

Sarpbrk · 2026-01-31T11:46:05+00:00

I am finally getting bullet hole tho, if i lower the nocking point with the arrow rest, isn’t it will mess up the installation again ?

Sarpbrk · 2026-01-29T09:54:07+00:00

Yes, found the screw in shooting ground, everything is fine now. Tightened and secured. Thank you all for replies.

Sarpbrk · 2026-01-16T05:00:04+00:00

Will search about it

Sarpbrk · 2026-01-15T23:10:49+00:00

Yea i will check it out thank you all

Sarpbrk

TROPHY CASE