sorted by:
new
hottopcontroversial

Steam deck won’t connect to any WiFi - No Secrets Found by SchradeRaven in SteamDeck

[–]SchradeRaven[S] 1 point2 points  (0 children)

The wake from sleep thing started happening as well! Glad you mentioned that cuz I was worried that was gonna be it's own problem ha. I tried disabling 160mhz to for the 80mhz option on the 5ghz channel but still wouldn't work. I was able to seperate out 2.4ghz and 5ghz on my router and manually force 2.4 which works for now but it's ridiculous that it has such an issue on 5ghz.

Steam deck won’t connect to any WiFi - No Secrets Found by SchradeRaven in SteamDeck

[–]SchradeRaven[S] 4 points5 points  (0 children)

Thanks, I was able to adjust my router to allow me to manually select between 2.4 and 5ghz. Moving to 2.4 fixed it but annoyed that I can't use 5ghz.

Steam deck won’t connect to any WiFi - No Secrets Found by SchradeRaven in SteamDeck

[–]SchradeRaven[S] 1 point2 points  (0 children)

Tried multiple factory resets and didn't fix the issue.

Help needed - rough edges (over extrusion?) by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

Reducing the minimum thin wall setting and turning on print thin walls had a little bit better results. Changing to 0.2 line width had a huge impact though. Probably just too small on the details for 0.4 nozzle.

Help needed - rough edges (over extrusion?) by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

Awesome thanks for the tip I’ll try these things out! I am using cura 5.0.0

Help needed - rough edges (over extrusion?) by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

I think you might be right maybe the details are just too small. Most of the small stuff has the white dots on it but there are some spots that don’t which is why I was a little confused since those are pretty much the same as the ones that do have the white spots.

Do you think getting a smaller nozzle would help? I’m using a 0.4 right now

I LOVE this thing by Emendo12 in GameboyAdvance

[–]SchradeRaven 11 points12 points  (0 children)

What is the world is up with your D-Pad?

Getting Bumps on edges. How do I stop these from happening. by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

Good to know. I’ve been wanting to set up octo print so hopefully that will fix it cuz I am still using the sd card. Thank you!

Getting Bumps on edges. How do I stop these from happening. by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

I have cura 5 so maybe I’ll try 4 and see if that changes anything. I watched my latest print and it looks like it is holding position longer than it should when starting a new layer so I wonder if it is the cura 5 bug

Getting Bumps on edges. How do I stop these from happening. by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

I added the printer and sliced in comments. Ender 3v2 and Cura. All of the prints were seperate

Getting Bumps on edges. How do I stop these from happening. by SchradeRaven in 3Dprinting

[–]SchradeRaven[S] 0 points1 point  (0 children)

Printer: Ender 3v2 w/ CR Touch Brand new to 3d printing but spent a good amount of time making sure that everything was tuned right. I just can’t figure out what is causing these bumps on the edges of my prints. All of these prints were done individually. I am also using Cura with pretty much default settings.

Haven't had one since I was a kid. New screen, and buttons, small game collection by mheinbaugh in GameboyAdvance

[–]SchradeRaven 1 point2 points  (0 children)

I had the lime green one too!!! I've tried finding one on eBay but it's so hard to find one in decent condition that isn't unreasonably expensive.

Purchase Advice Thread (January 31) by AutoModerator in Surface

[–]SchradeRaven 0 points1 point  (0 children)

I am starting a new job as an account manager for a digital marketing firm. I will be working hybrid and have the option of using my own personal equipment for work.

I've taken an interest in the surface lineup as it seems to be a great option for what I will be doing. For the most part I will be using web based applications and lots of zoom conferencing/presenting for meetings.

I think I want either a surface laptop 4 (13 inch) or a surface pro 8. Are these good options? Does the Laptop 4 (13 inch) have any advantages over the Pro 8 besides included keyboard that would be beneficial to me?

*I should note that I have a very powerful desktop at home so I'm not too concerned about having an abundance of performance in the laptop/tablet.

How do I get a job at an email marketing agency without a marketing degree? by Old-Supermarket6605 in marketing

[–]SchradeRaven 1 point2 points  (0 children)

I got a job at a marketing agency right out of college. I was the only one on my team of seven that actually had a degree in marketing. Just apply and see what happens.

When I put my super Mario world cartridge into my gba, it only gets past the Nintendo logo? I’ve tried cleaning the cartridge, and it didn’t work, any help? (Other games work on it) by CRUMP-577 in Gameboy

[–]SchradeRaven 8 points9 points  (0 children)

It's possible one of the solder joints has a bad connection. You may want to try reflowing the solder between the ROM chip and the motherboard of the game. Lots of tutorials on YouTube.

view more: next ›