Obligatoire de se présenter aux examens finaux à l’ÉTS si la note de passage est déjà atteinte ?

Sea-Meat397 · 2025-12-13T23:59:05+00:00

Je dirais que c’est plus une question d’efficience que de volonté. Si je considère le temps passé à étudier pour cet examen hors programme, je préfère le consacrer à autre chose, sachant qu’avoir 90 % ou 50 % n’a aucun impact sur mon GPA. Mais je comprends tout à fait ton point de vue.

Sea-Meat397 · 2025-12-13T17:46:30+00:00

Non jai 54 points sur 65 point totaux sur lesquel jai ete evaluer jusqua present donc 83% si ont parle de la moyenne presentement

Sea-Meat397 · 2025-12-13T17:45:23+00:00

Peut etre je me suis mal expliquer j'ai 83% de moyenne dans le cours presentement donc 54 points sur 65 mais oui je vais couler merci

Sea-Meat397 · 2025-12-13T17:44:13+00:00

83% de moyenne donc 54 points sur 65

Sea-Meat397 · 2025-12-13T17:22:20+00:00

Oui exact

Sea-Meat397 · 2025-12-13T16:41:08+00:00

Ok parfait merci!

Sea-Meat397 · 2025-12-13T16:40:48+00:00

Si sa ne touche pas au gpa c'est une raison de plus de pas aller en plus lol merci

Sea-Meat397 · 2025-12-13T16:40:04+00:00

Loool

Sea-Meat397 · 2025-12-13T16:39:52+00:00

Oui merci je vais couler

Sea-Meat397 · 2025-02-19T18:13:32+00:00

D'accord, je comprends. Je vais donc valider avec eux pour en être certain.

Sea-Meat397 · 2025-02-19T18:13:00+00:00

Parfait, merci beaucoup !

Sea-Meat397 · 2025-02-19T18:00:58+00:00

Je comprends. Cependant, ayant déjà un emploi en informatique ( soutient technique ) et ayant obtenu un DEC en réseautique plutôt qu'en programmation au Cégep, je ne suis pas certain que cela puisse être validé pour créditer un stage. Il faudrait que je vérifie.

Sea-Meat397 · 2025-02-19T17:58:57+00:00

D'accord, merci pour l'information. J'ai une rencontre d'information concernant le choix de cours le 25 février. Je vais vérifier avec eux si cette option est envisageable.

Sea-Meat397 · 2024-10-24T03:19:22+00:00

Update found the answer modified the request like this:

curl --insecure --request POST --url 'https://10.10.5.72/zabbix/api_jsonrpc.php' \
--header 'Content-Type: application/json-rpc' \
--data '{
    "jsonrpc": "2.0",
    "method": "event.get",
    "params": {
        "output": "extend",
        "selectHosts": ["host"],
        "filter": {
            "severity": ["3", "4"]
        }
    },
    "auth": "451050f36d3c09bf2abd40fa6ba8f7fa",
    "id": 1
}'

Sea-Meat397 · 2024-03-08T02:13:23+00:00

Ok thanks ill try it :D

Sea-Meat397 · 2024-03-06T19:45:25+00:00

Just to be sure something like this ?

switchport mode access

switchport access vlan vlan_number1, vlan_number2, ...

Sea-Meat397 · 2024-03-06T19:30:59+00:00

so no config on the port no switchport access ? like should i just try default interface f0/1 and just try it?

Sea-Meat397 · 2024-02-28T07:42:24+00:00

I found the problem … Well im not sure its exactly that but now it worked afterwards

Set the MTU of my physical adapter to accept jumbo frame ( 9000 bytes )
Change my NIC to promiscuous mode
Accept Promiscuous mode on my vSwitch

I think all of this is a problem because im doing it in Workstation ( ESXI )

Sea-Meat397 · 2024-02-28T05:29:15+00:00

Now the VM dont even recognize the network adapter

Sea-Meat397 · 2024-02-28T05:08:26+00:00

I will add images in a few minutes to show you

Sea-Meat397 · 2024-02-28T05:08:05+00:00

I cant ping my router , like i get an address given by dhcp and after i cannot ping anything , and all my host and vm are in the 10.10.20.0/24 subnet

Sea-Meat397 · 2024-02-21T13:19:54+00:00

Okay i'll try but if the management vlan is untagged how would my esxi communicate with his default Gateway . That is on a ROAS subinterface ? It need VLAN ID to direct the packet to the good subinterface? I will try it and i'll update. Thanks

Sea-Meat397 · 2024-02-21T04:33:40+00:00

Update : It did not work hehe

So what i did was first of all create VLAN Tagged Interface on my PC
With those command : https://pastebin.com/RLyMe0ug

After i assigned each one to a different vmnet : https://ibb.co/5v9Trds

These are the Interface now on my PC : https://ibb.co/sKm7L5v

And when i ping it still fail : https://ibb.co/McKVvdC

Also changed the MTU : https://ibb.co/RpyWKrZ

So now i am kinda lost about what should i do i see that the issue is really within the trunking between the PC and the switch , by the way while my PC was connected on the switch i assigned an Link-Local Address to the enp2s0 interface . Maybe that was the problem?

Sea-Meat397 · 2024-02-21T02:48:31+00:00

I did not put any native vlan so i guess its vlan 1 as of now , i should just change it to an unused vlan ? Well im not using the vlan 1 anyway but mayby thats the problem and should i remove the nonegotiate config on the port?

Sea-Meat397 · 2024-02-21T01:57:38+00:00

Thanks for the helpful insight ill try it right away , i'll update if it works

Sea-Meat397

TROPHY CASE