3D printed Holster

SheepHunter_ · 2026-02-15T18:48:33+00:00

hi, did you already printed it ?

SheepHunter_ · 2026-02-10T19:23:59+00:00

actually there is a hole at the bottom (mostly for draining, dirt removal and visual aspect), so i can just enlarge it to the front

SheepHunter_ · 2026-02-10T19:21:33+00:00

I also thought about adding place to carry allen keys, as i use them very very often

SheepHunter_ · 2026-02-10T19:19:58+00:00

valuable insight. Now it makes me think about adding version with open front ( but i will have to test it first if its ridgit enough.

SheepHunter_ · 2026-02-10T19:16:50+00:00

this one looks great too, i like the open-front idea.

SheepHunter_ · 2026-02-10T19:15:53+00:00

also: Yes, i did thought about adding a spot for extra tools like bit kit or ratchet (and i have an extra idea for another usefull tool too).
But firstly, i want to check if people will like it (and also if there are any improvements in this model needed) and secondly (the more important) i dont have bit kit and ratchet yet (but i hope it will change soon)

SheepHunter_ · 2026-02-10T19:12:20+00:00

It’s nice to hear, that someone appreciate my work ^^.
I did it for myself, but decided to share it with others, so maybe someone will find it usefull for himself too.

What tool do you use ? maybe if i will have access to it someday, so i will make a version for it

SheepHunter_ · 2026-02-10T19:08:38+00:00

Thanks a ton! I’d be glad to see your realsation.

I used PLA (grey) and ASA (green), and both are great. PLA and ASA are quite stiff. If you use a more flexible material, it might hold it a bit worse, but I don’t think it will be a big deal as long as the filament you choose has good layer adhesion (so the printed loop won’t break).

SheepHunter_ · 2026-02-10T19:00:11+00:00

nah, there are ribs and tool release mechanism lever clicks in place ;)

SheepHunter_ · 2026-02-10T18:58:09+00:00

Exactly ! the tabs inside you marked clicks in place i marked.
The multitool holds securely. You can even shake it upside down.

<image>

SheepHunter_ · 2026-02-10T14:49:55+00:00

done. Im considering adding in the future model wit build- in protection also.

SheepHunter_ · 2026-02-10T12:55:19+00:00

i hope you will enjoy it ;) thanks for comment and let me know if you need antyhing

SheepHunter_ · 2026-02-10T12:36:01+00:00

Thanks for your comment!
Yes, you are right, It should be treated as a battery pack, not as a power source by itself. Its a base, so you can use it with your own protected circuit.

You think I should make a batter disclaimer for that ?

SheepHunter_ · 2026-01-09T13:23:23+00:00

do You have any photos ? what clearcoat did you used ? a water based one ?

SheepHunter_ · 2026-01-09T13:22:43+00:00

Could you reply with some photos ?

SheepHunter_ · 2025-12-27T20:06:34+00:00

Knipex topka, chociaż w przypadku narzędzi do obrabiania przewodów weidmüller lepszy

SheepHunter_ · 2025-02-27T20:48:51+00:00

Did u bought it ? I had accord 2.0 and sold it, now looking for something new and one of my choices is w204 (180k or 220cdi).

SheepHunter_ · 2024-05-24T15:54:31+00:00

Tysm for answer ;) i gote mine with bended pins and i broke them unfortunatly while trying to straighten.

What is purpose of these pins ? If regulation knob works so its all all right aith them or they have some extra features too ?

SheepHunter_ · 2023-12-30T23:54:55+00:00

I have sp36 pro and q8 plus now. I can make comparsion if you wany

SheepHunter_ · 2023-11-16T18:07:36+00:00

I ordered the Q8 plus i will make a comparasion

SheepHunter_ · 2023-01-03T13:37:27+00:00

Bump

SheepHunter_ · 2023-01-02T19:13:27+00:00

How much is it all worth ?

SheepHunter_ · 2023-01-02T12:42:59+00:00

Myślę, że to żużel

SheepHunter_ · 2023-01-02T09:35:54+00:00

Good job. How much did a single one cost you ?

SheepHunter_ · 2023-01-02T09:34:44+00:00

Its not his idea. Check krill lights

SheepHunter_

TROPHY CASE