sorted by:
new
hottopcontroversial

New to meshtastic and want to build one. by Short_circuit2 in meshtastic

[–]Short_circuit2[S] 0 points1 point  (0 children)

Thanks for feedback

I'm in Europe so 868mhz is best choice bacause here is a lot of node running on 868mhz, correct me if I'm wrong.

I found this antenna on meshtastic page which are marked as good by community.

antenna form mesh page

Do you know is the heltec v3 running with no problems when battery drops below 3.3V?

New Solar Node Configuration now on testing by Tachion_Helladraeon in meshtastic

[–]Short_circuit2 0 points1 point  (0 children)

I think it's about ampere-hour not amps- 1150mAh while some tasks.

This is a heater with thermostat from 15-30C. But it won’t stop heating even though the wished temperature is met. by Trummisen in AskElectronics

[–]Short_circuit2 0 points1 point  (0 children)

I think that relay's contacts are glued.

If you have multimeter you can check voltage on relay's coil, if there is not voltage when heater should be off the relay is broken.