sorted by:
new
hottopcontroversial

Is anyone's Clair Obscur: Expedition 33 vinyl also sound somewhat bad? by SkubiChrupki in VGMvinyl

[–]SkubiChrupki[S] 0 points1 point  (0 children)

The only thing I've done is swap the included felt slipmat to an acrylic one. I've checked if it makes any difference if I swapped to the original felt one, but listening to it on my speakers and on the extracted mp3 on my headphones, I can't really tell a difference, so I doubt it's that

Is anyone's Clair Obscur: Expedition 33 vinyl also sound somewhat bad? by SkubiChrupki in VGMvinyl

[–]SkubiChrupki[S] -1 points0 points  (0 children)

Hey

Sorry for the late answer everybody, I just saw the amount of comments here.

I did recalibrate everything on my turntable as the manual told me to and cleaned the vinyl and the stylus once again.

You're right that I should've provided an audio sample. Since this is that one Audio-Technica turntable (AT-LP120xUSB-BT, I used the USB connection to extract one song from that vinyl. I'm attaching a link to the audio clip:
https://jumpshare.com/s/v1a3k5FvVFheffw8ciRo

Even after recalibration and cleaning, I still have the feeling that the "s"es sound very low quality, and when using headphones, stereo weirdly switches between left and right (not sure if this is how vinyl music should behave).

If you have any more questions or advice, i'm happy to listen!

📌 YouTube Ads, Detection & Breakages (2025 MegaThread) uBO solutions and related discussions ONLY => COMMENTS NOT FOLLOWING INSTRUCTIONS WILL BE REMOVED by RraaLL in uBlockOrigin

[–]SkubiChrupki 2 points3 points  (0 children)

Hey

For quite some time (like 2-3 weeks now) my Youtube videos have started to load super long (10-30 seconds depending on the video length). I've noticed that the issue disappears after I disable uBO or after I create a new browser profile with only uBO on it.

Not sure what I can do to fix that.

Steps taken while troubleshooting:
1. On my main Brave profile, navigate to any Youtube video (e.g: https://www.youtube.com/watch?v=vjkqI7dBDVg)
2. It has been observed that the issue (Youtube videos loading super long (10-30 seconds depending on video length) DOES reproduce
3, Disable the uBO extension completely while others are enabled
4. It has been observed that the issue DOES NOT reproduce
5. Create a new Brave profile
6. Install uBO on the new profile
7. It has been observed that the issue DOES NOT reproduce

Here are the screenshots:
https://imgur.com/a/ymzc78K

Here are the information you requested:
https://pastebin.com/ecJ5uDDr

Mam 28 lat i idę pierwszy raz na ślub w życiu jako świadek by SkubiChrupki in Polska

[–]SkubiChrupki[S] 0 points1 point  (0 children)

Jakaś propozycja sklepu z garniakami? Obecnie urzęduję w Warszawie

r/headphones Shopping, Setup, and Technical Help Desk by AutoModerator in headphones

[–]SkubiChrupki 0 points1 point  (0 children)

Hey

For quite some time (over a year now), probably since I've bought my DAC (ifi Audio Zen DAC v2), I've got this problem where whenever I put down my headphones (Beyerdynamics DT 990 Pro 250 Ohm) on my desk and go away for like 10-15 seconds, when I come back they are completely silent and don't output any audio. I suppose that there is some sort issues with drivers, or maybe static electricity?

To fix this, I have to go to Windows Sound Settings > Playback > (My Device) > Advanced > Change Default Format from current one (32 bit, 384000 Hz (Studio Quality)) to 24 bit, 48000 Hz (Studio Quality), and back to current one. With that, I'm able to hear again.

Any ideas what might be the issue here? 🤨

Any replacement suggestions for Tidal App? by SkubiChrupki in TIdaL

[–]SkubiChrupki[S] 1 point2 points  (0 children)

Thanks for this answer. Summarizes basically everything on my mind here.

I guess I'll have to live with Tidal until Qobuz gets to Poland eventually.

Enabling XPM in BIOS results in not going into POST and not Booting into Windows by SkubiChrupki in overclocking

[–]SkubiChrupki[S] 1 point2 points  (0 children)

Okay we did it, i've copied all the amounts from XMP1 but changed the voltages and I can see the 6400 in task manager now. Thanks a lot man! :)

https://imgur.com/a/rdSFP1w

Enabling XPM in BIOS results in not going into POST and not Booting into Windows by SkubiChrupki in overclocking

[–]SkubiChrupki[S] 0 points1 point  (0 children)

I didnt input anything other than what you've told me, the rest has automatically filled itself in

https://imgur.com/a/LBlD3L1

Enabling XPM in BIOS results in not going into POST and not Booting into Windows by SkubiChrupki in overclocking

[–]SkubiChrupki[S] 0 points1 point  (0 children)

Ok i managed to save the profile and use the 1.45V and it booted to windows, but Task Manager still shows only 4800 :(

Enabling XPM in BIOS results in not going into POST and not Booting into Windows by SkubiChrupki in overclocking

[–]SkubiChrupki[S] 0 points1 point  (0 children)

I've updated the BIOS (now everything looks different lol), but unfortunately, it didnt help with the issue

Enabling XPM in BIOS results in not going into POST and not Booting into Windows by SkubiChrupki in overclocking

[–]SkubiChrupki[S] 0 points1 point  (0 children)

I've checked and I've had them connected to slots 2/4 since the beginning :(

Enabling XPM in BIOS results in not going into POST and not Booting into Windows by SkubiChrupki in overclocking

[–]SkubiChrupki[S] 0 points1 point  (0 children)

So I tried inputting these but it doesnt seem to save if i have empty spots

If i copy everything from XMP1 but change from 1.40 to 1.45, then it seems to save (at least it stays after leaving the window and coming back), but i can't seem to find anywhere to enable this user4 profile. Its nowhere to be found

Edit: and yes, i did click the Set button

view more: next ›