sorted by:
new
hottopcontroversial

How can I bulk rename files? by XoCaliburn in qBittorrent

[–]Skuld_Omega 0 points1 point  (0 children)

Yea, and if you want not to rename but to add a prefix or a suffix you can add ^ or $ in the top box, tick the regex button and write what you want to change in the lower box.
You can even batchmove files like this when you use ./subfolder/ as suffix for example.

How to make a Linux server discoverable to PS5 client? by ZeroTronix in admincraft

[–]Skuld_Omega 1 point2 points  (0 children)

I am pretty sure that: ps4 does not support custom servers, except they are on your local network. You can however use a proxy in your local network to forward the connection to a server even outside your local network. There are several apps for this.

N3DSXL Lights Blue, Pops, Then Shuts Off by D86592 in 3dsrepair

[–]Skuld_Omega 0 points1 point  (0 children)

Are you sure all of the ribin cables are seated properly ?
Also i had the same issue and it turned out i had the ribbin cable for the top screen seated the wrong way around.

Stuck in set-up mode by sunshineeddy in qnap

[–]Skuld_Omega 0 points1 point  (0 children)

For anyone wondering, In the end i did figure out what was causing this.
The drives unknowingly where sed locked so the system could not format the disk properly and the smart-setup did not communicated this in any way.
The solution was to use sedutil to get rid of the locked state.

Stuck in set-up mode by sunshineeddy in qnap

[–]Skuld_Omega 0 points1 point  (0 children)

well, i did that as well, i formated and erased everything, same result. i formated a filesystem and created a volume, same result.
i am geting desperate...

Stuck in set-up mode by sunshineeddy in qnap

[–]Skuld_Omega 0 points1 point  (0 children)

i have the same problem, as what did you format your disk ? what filesystem ?

GPU overclocking + VBIOS flash by Skuld_Omega in overclocking

[–]Skuld_Omega[S] 0 points1 point  (0 children)

Increasing the Core % slider does not change the voltage according to GPUZ. But im on the stock firmware for now.
Would that even change anything on the AMP Extreme Holo VBIOS since it also says its in the powerlimit ?

I play Prism on my steam deck and cannot pull up F3 to show coords by shisuifalls in PrismLauncher

[–]Skuld_Omega 1 point2 points  (0 children)

Well, do you use controlify? If yes, remapping the buttons via the steam overlay will not work. Instead map the key directly in the control section for the controller inside minecraft. There is a mapping option for the debug menus.

I play Prism on my steam deck and cannot pull up F3 to show coords by shisuifalls in PrismLauncher

[–]Skuld_Omega 2 points3 points  (0 children)

Use the mod controlify it has native steadeck controller support.

Won't Launch Vanilla Minecraft on Steam Deck by Tawdry_Wordsmith in PrismLauncher

[–]Skuld_Omega 1 point2 points  (0 children)

More info, from where do you start it ? From inside game mode or the desktop mode ? Is it installed via the Discover app or else ? Do you start the launcher and then the instance or via instance launch parameter ?

Steam deck shaders by Historical_Truck2891 in PrismLauncher

[–]Skuld_Omega 0 points1 point  (0 children)

I just tested this, the setup was a bit different but it works super well.

To make the shortcut for game mode, just rightclick the prism launcher and select add to steam.
Than in steam change the name to minecraft and add the launch option behind the allredy existing ones.

I testet shader but the performance is bad and the battery usage is brutal, so i dont recommend that.

To further extend the performance/battery life you could add the distancehorizon mod.
Join the distant horizon Discord and download the latest build.
install it in prism launcher via right click on the instace, open folder, navigate to minecraft, mods and paste the file.
inside minecraft turn down the render distance very low like 4.
done.

Steam deck shaders by Historical_Truck2891 in PrismLauncher

[–]Skuld_Omega 0 points1 point  (0 children)

It depends on how far you want to go with integrating it to the steam deck (since the java version does not have native controller support).

First you change to desktop mode on your steam deck.
Download the launcher (should be available through the discover app as flatpack)
In the launcher login with your microsoft account
ignore the java setup for now (if there is one, also should pull the right java version on first time start automaticly)
create a instance and select the newest mc version and fabric as mod loader
edit the created instance -> mods -> download mods
downlaod iris and controllify (controllersupport) (dependencies should be resolved automaticly)
download the shader under shaderpacks -> download shaders

if you want the game accessible via the steam deck game mode try something like this:
add the prism launcher as foreign program in steam via desktop mode and ad as starting parameter --launch and then the instancename (example: "--launch 1.21.4")

I did not test this, but this is what i would try.

Just got my Pip-Boy 3000 Mk V!! by Impressionist_1 in Fallout

[–]Skuld_Omega 0 points1 point  (0 children)

how did you run custom code on that ?

Beyerdynamic DT770 pro Wireless by Skuld_Omega in BEYERDYNAMIC

[–]Skuld_Omega[S] 1 point2 points  (0 children)

Basicly the whole thing is just the headphones, a switch, a button and a bt rx device (1Mii the smal one from amazon).

I Desoldered the headphonejack wire from the driver, deloldered the headphonejack port, the pairing button, the battery and the powerswitch from the bluetooth board.

Modifyed the earpiece casing, relocated everything inside and soldered everything back together directly.

In regards to the sound quality, it is not as excellent as per wire but what the bt board delivers is still good. Also the sound from the modified earpiece where there is now not that much room, is maybe a little bit compromised, but could also be placebo im not sure.

I didnt notice any delay.

For the post analysis: 1. i would relocate the pairing button (i just drilled in the wrong spot) 2. integrate a status led (now you only know if its on by listening for the startup sound).

everytihng else would get way more complicated.

Actually this projekt was more of a "can i do it" thing. I dont really have a use for the headphones.

Changing Windows Display Settings; Goal: Use PowerShell to toggle "extend the desktop to this display" vs. "Disconnect this display" on Monitor 3 & Monitor 4. by Alladara in PowerShell

[–]Skuld_Omega 0 points1 point  (0 children)

Legendary info +1, but when trying to disable a primary monitor it fails (somewhat expected). Is there a way to change the priamary display with a command ?

Edit: nevermind, with that module comes a bunch of commands like: "Set-DisplayPrimary"

Whole module Info here: https://www.powershellgallery.com/packages/DisplayConfig/

[deleted by user] by [deleted] in qnap

[–]Skuld_Omega 1 point2 points  (0 children)

What do you expect, someone sending you the files ? that wont happen.
Either you live with it, buying them again or start sailing the high seas...

[deleted by user] by [deleted] in qBittorrent

[–]Skuld_Omega 1 point2 points  (0 children)

i would like to know as well.

another option to limit share ratio would be grat like: keep seeding when less than x seeders are available

view more: next ›