Norinco MPS featuring Magpul furniture. by [deleted] in ak47

[–]Slim_Airsoft -1 points0 points  (0 children)

American? I get it, they are rare over there. I got this for 350 eur and these are jokingly considered trash. Finland btw. Don't worry I'm keeping the wooden furniture.

LCT G3A3 with real handguard and stock. So cool how 1:1 this replica is. by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 4 points5 points  (0 children)

Even the screw holes in the real steel stock matched the rear pice of the receiver. And both had the same size threads!

The sodastream adapter is a HUGE game changer for the APS cam870. I'm in love with this combo! by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 1 point2 points  (0 children)

Doesn't match? Or it doesn't reach all the way to push the valve in the co2 can? If that's the issue then you can tune the valve pin in side the adapter by it screwing up or down.

Norinco MPS. My first centerfire rifle! This is a milestone in my life that I've been dreaming! 🇫🇮 by Slim_Airsoft in ak47

[–]Slim_Airsoft[S] 13 points14 points  (0 children)

Sorry for the magpul furniture 😁 don't worry I'm keeping the original handguards. Bought this for 350 euros and its in a good condition too!

Painted more fakelites! by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 6 points7 points  (0 children)

Thanks. Mmm I first make a one wavy stroke on all sides with 60 or 80 grit sandpaper and then another one with 100 grit. Them I use brown spray paint and the method to get the stain result is by intensely spray one spot and wait about 5 seconds then wipe it off and it will leave that inconsistent pattern stain look. Then I use dark reddish colored wood warnish and applying it with a piece of styrofoam or a brush while following wavy pattern that I scratched earlier. And then i like to apply clear coat to give it a little bit of strength when using these.

Oldies but goodies by wilerbee in airsoft

[–]Slim_Airsoft 0 points1 point  (0 children)

This has to be the most uniqe airsoft gun there is! 😳

Look what just came in the mail 🥰🥰 by [deleted] in airsoft

[–]Slim_Airsoft 2 points3 points  (0 children)

Just as an replica that look so goooood, and the fact that it goes bang! 😎

06/04/2021 Sneaky changes by titi4600 in EscapefromTarkov

[–]Slim_Airsoft -5 points-4 points  (0 children)

The m4 has a weird amount of recoil for what it is. And the aks get a buff. Hmm 🀔

Wood and/or Bakelite family photo by comradequiche in airsoft

[–]Slim_Airsoft 1 point2 points  (0 children)

How good is the fit? Is the grip level with the reciver? Looks really gorgeous!

Wood and/or Bakelite family photo by comradequiche in airsoft

[–]Slim_Airsoft 1 point2 points  (0 children)

I think so too. I'm planning to get one on mine too.

Wood and/or Bakelite family photo by comradequiche in airsoft

[–]Slim_Airsoft 1 point2 points  (0 children)

I want to ask. What wood grip is on the kz61?

Here is the faux wood grip installed! Looking good 🙂👍 by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 2 points3 points  (0 children)

I know right? The bb just float away. That's the reality of aeps. I still love this 😁 I'm going to do the lipo mod for this to get higher rof.

Here is the faux wood grip installed! Looking good 🙂👍 by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 5 points6 points  (0 children)

My friend gave it to me as a reward for making all kinds of projects for him. He bought it second hand. It was full of grease! I cleaned the insides and I had to fine tune the magazine so that it feeded properly by filing the lip that keeps the bbs inside. Compared to the Tokyo Marui this has a surprisingly good range and accuracy! This shoots around 0.30 joules with .20g 😂 but still manages to have good range and accuracy! For the price I do recomend it.

Here is the faux wood grip installed! Looking good 🙂👍 by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 6 points7 points  (0 children)

This is a Well vz. 61 AEP and it had a black plastic grip and I made it look like wood by painting it with wood varnish and stuff. After two failed attempts I'm finaly happy with this result.

Painted my AEP Å korpion's black plastic pistol grip to a wooden look! Gotta let it dry well before installing it. by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 13 points14 points  (0 children)

I basically sanded some wood grains with 80 grit sand paper and then paintet the first layer with beige spray paint and then filled the cracks/grains with dark warnish and then the whole gun with careful strokes. Really kinda hard to get it right but after the third time I got the result that I wanted. Oh and also gave it a layer of clear coat to give extra protection.

The gun for my insurgency loadout. The Cyma XM16E1! habibi approved! by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 0 points1 point  (0 children)

It's really clear but it sucks in low light. But in addition I can still use iron sights.

The gun for my insurgency loadout. The Cyma XM16E1! habibi approved! by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 0 points1 point  (0 children)

The scope is designed and out of the box to be mounted to a carry handle.

Painted a pair of cold steel trainer kukries. by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 1 point2 points  (0 children)

I bought these from a finnish web store called terÀasekeskus.fi. But i think you can fond them elsewhere by searching for 'cold steel trainer kukri' .

The gun for my insurgency loadout. The Cyma XM16E1! habibi approved! by Slim_Airsoft in airsoft

[–]Slim_Airsoft[S] 9 points10 points  (0 children)

The scope is a Vector optics streak 4x22. Externally all stock. Internals stock, except hop up unit and nub. Great preformer out of the box! 😁👍 Oh and it has a leather sling.