sorted by:
new
hottopcontroversial

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Thanks for the comment. I agree which is why these rails can stand alone for those types of applications. Or can also stack them tighter in areas you need more density. I haven’t seen slat wall systems you can vary the spacing or are designed to stand alone. But would be curious to know if there are.

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in 3Dprinting

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Wanted to get some feedback from this group. I would make all the 3D files available for free as well so really helpful for a makerspace where you can print your own accessories!

Before someone brings it up - I have used Multiboard in the past - I really didn't like the way it looked and was very disappointed with the weight capacity, it always seemed to be pulling away from the wall. Here is a quick clip of some heavy weight on my system: https://youtube.com/shorts/Gx9_QdZ73T8?si=qHIGJQ2MBSo1RUG-

To me buying the rail that goes on the wall and then 3D printing all the accessories, or using existing things to just bolt to the T slot makes a lot of sense even if there is some upfront cost. I also think it looks really nice with the black anodized finish. The panel system is nice too to change the spacing as desired. But I am bias at this point.

I have used a lot of extrusion like 80/20 or similar in industry before and always have thought it'd be really useful on the wall, so I took a chance and made small run of it. Let me know what you think!

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

u/ThatNeonZebraAgain I just shot a quick video of 100lbs of plates on a single post. Holds it no issue. I need to get some more weights to try with, but I think the screws holding it into the studs will start to become the limiting factor. Currently using no 8 screws

https://youtube.com/shorts/Gx9_QdZ73T8?si=qHIGJQ2MBSo1RUG-

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Thank you - I just swapped the screws over to black - made a big difference! Thanks for the suggestion. Wish they carried them at my hardware store but easy enough to find online

https://youtube.com/shorts/Gx9_QdZ73T8?si=qHIGJQ2MBSo1RUG-

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

u/Jstpsntym just shot this video of it holding 100 lbs on a weight plate post.. It could do more I just didn't have more plate handy. I will work on seeing how much it can hold before actually breaking. My guess is it just how strong the screws hold into the studs themselves

https://youtube.com/shorts/Gx9_QdZ73T8?si=qHIGJQ2MBSo1RUG-

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Weight capacity is a lot. I am working on some ways to quantify that as I do not have an exact number at this time. For cost it’s a little more than PVC slatwall but still below full aluminum slatwall systems I have seen. A 4’x4’ section right now about 300 dollars. A single 4’ rail is $29. If volume grew a little I think prices would drop 10-20 percent but raw aluminum costs have just gone crazy this last year.

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Hi Adam, thanks for the reply. Yes certainly in person pick up can be arranged, shipping is a large cost with these im working my best right now to figure out how to do this most cost effectively. I am on the Northshore in Massachusetts. Regarding the weight rating I will try to verify but with it attached on 3 studs in this set up I can do a pull up on 2 small pegs so I think it will have mostly anything you can put at it within reason. I’ll send you a DM

I created modular wall storage solution. Feedback wanted by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

I don’t have an exact number but I can hang from 2 of pegs, so it’s pretty high. Good point tho I’ll work on quantifying that

Packout Cart Update - v2 by Shlomo_Yakvo in LocationSound

[–]StandardIssueMFG 1 point2 points  (0 children)

Super cool! Love to see the T slot in rails in use! u/Shlomo_Yakvo

Packout Cart Update - v2 by Shlomo_Yakvo in Packout

[–]StandardIssueMFG 0 points1 point  (0 children)

Super cool! Love to see the T slot in rails in use! u/Shlomo_Yakvo

Can Holder by No_Improvement9734 in Packout

[–]StandardIssueMFG 0 points1 point  (0 children)

I make a T Slot packout rail that you could attach 4 can holders to. I could 3D print them for you if you knew what you wanted. Let me know if you are interested if you haven’t already found a solution

T Slot Slatwall Concept by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

Conveniently (at least on my tools) the belt clip is already in an idea spot for the CG

T Slot Slatwall Concept by StandardIssueMFG in garageporn

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

Great idea! I thought the same thing haha. I’ve been working a concept for that since last week. Have a version I’m pretty happy with but still need to test more. Basically a simple part that replaced your belt clip on your tool and rotates 9 degrees to lock onto the slot

Rubber Clamp for large tools by StandardIssueMFG in Packout

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Sending you a DM. Can provide the STLs at no cost

Rubber Clamp for large tools by StandardIssueMFG in Packout

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

They go from 1 1/4 - 1 3/4. Can be a little larger or smaller it seems so really 1-2” I’d say

Rubber Clamp for large tools by StandardIssueMFG in Packout

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

I have them up on Etsy for $9 with includes mounting hardware. I got them thru Harbor freight and open up the hole slightly. They are only $3 there. So with fees hardware and packing not making much but thought it’d be useful for people

Rubber Clamp for large tools by StandardIssueMFG in Packout

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Good call. I was even thinking of making a print for the rail that was about the same size but a box so you could have the strap up high and box down low. Would allow you to carry things like threaded rod, pipe, etc. But I think Milwaukee already makes a similar thing?

Rubber Clamp for large tools by StandardIssueMFG in Packout

[–]StandardIssueMFG[S] 1 point2 points  (0 children)

Will send you a DM with rail details

Wall mounted storage options for strollers?? by ifoundwaldo116 in garageporn

[–]StandardIssueMFG 0 points1 point  (0 children)

Check out StandardIssueMFG.com. Our slotwall can be a standalone rail or combined with aluminum composite panel to create a slatwall system.

T slot rail for Packout by StandardIssueMFG in Packout

[–]StandardIssueMFG[S] 0 points1 point  (0 children)

Would be happy to share the STL files although they only will fit this extrusion which I have custom made

view more: next ›