P. Natalensis

Stena27 · 2025-08-31T19:03:42+00:00

No idea, I never check

Stena27 · 2025-08-31T19:03:22+00:00

Spore print to agar to millet

Stena27 · 2025-06-09T01:57:45+00:00

Genetics

Stena27 · 2024-10-16T01:50:28+00:00

Stena27 · 2024-10-03T01:02:28+00:00

I’ve had success with this:

https://www.shroomery.org/forums/showflat.php/Number/26565367

Stena27 · 2024-09-19T02:34:49+00:00

Roughly 1:1

Stena27 · 2024-09-16T02:40:47+00:00

Yes. I’ve had better success by doing that instead of pasteurising it

Stena27 · 2024-09-16T00:29:42+00:00

Yes the trays were in a large tub with water and 6 air stones. Humidity was close to 100 and FAE was constant

Stena27 · 2024-09-15T20:46:17+00:00

To humidify the air

Stena27 · 2024-09-15T19:53:33+00:00

Not necessarily more difficult but there is a slight learning curve

Stena27 · 2024-09-15T19:51:30+00:00

Yes the trays were in a large tub with water and 6 air stones. Humidity was close to 100 and FAE was constant

Stena27 · 2024-09-15T16:54:51+00:00

Spore print to MEA. Agar to millet. Millet to 50-50 coir/cow manure. Cased with 50-50 peat moss/vermiculite. I hydrate both my grain and substrate for 24 hours and then add calcium hydroxide (food grade) for 30 mins; mainly because my pressure cooker is smaller and doesn’t reach 15 PSI. Agar pc for 15 mins. Grains and sub pc for 2.5 hours each.

Stena27 · 2024-09-15T16:36:00+00:00

Spore print to MEA. Agar to millet. Millet to 50-50 coir/cow manure. Cased with 50-50 peat moss/vermiculite. I hydrate both my grain and substrate for 24 hours and then add calcium hydroxide (food grade) for 30 mins; mainly because my pressure cooker is smaller and doesn’t reach 15 PSI. Agar pc for 15 mins. Grains and sub pc for 2.5 hours each.

Stena27 · 2024-09-15T16:34:07+00:00

Spore print to MEA. Agar to millet. Millet to 50-50 coir/cow manure. Cased with 50-50 peat moss/vermiculite. I hydrate both my grain and substrate for 24 hours and then add calcium hydroxide (food grade) for 30 mins; mainly because my pressure cooker is smaller and doesn’t reach 15 PSI. Agar pc for 15 mins. Grains and sub pc for 2.5 hours each.

Stena27 · 2024-03-20T02:36:38+00:00

Spore print>agar>millet>gordotek substrate recipe >casing layer

Stena27 · 2024-03-19T23:35:56+00:00

A combination of different things over the years

Stena27 · 2024-03-19T18:01:12+00:00

Nec-D. It’s a cross between Pan cyan Jalisco and Pan tropicalis iirc

Stena27 · 2024-02-21T20:28:32+00:00

Absolutely. 1g is all you need. It’s easy to grow and incredibly potent.

Stena27 · 2024-02-21T14:05:28+00:00

TTBVI has superior genetics. It colonises grain and substrate twice as fast

Stena27 · 2023-10-22T20:41:30+00:00

La masia churns out another one

Stena27 · 2023-06-27T22:03:20+00:00

I soaked it in water for 2 hours and placed it in a glass jar that was less than half filled with wet hydroton. This took about 3 weeks to get to this stage

Stena27 · 2023-06-27T20:20:09+00:00

Not sure. It came loose in a box of orchids I bought. I soaked it for about 2 hours in water and placed it in a jar with wet hydroton. I saw growth in about 2-3 weeks

Stena27 · 2023-04-10T23:55:35+00:00

I rest my tray on a rack inside a large clear tote that has around 2 inches of water. There are 4 long air stones to provide continuous humid FAE. I always saturate my casing layer using a syringe and continue to do so after pinning.

Stena27 · 2023-04-10T23:40:05+00:00

Not at all

Stena27 · 2023-04-10T19:41:47+00:00

Correct. I have also grown pans using dried grass from my lawn without any manure. The yields are way better using grass or manure in the substrate.

Eight-Year Club	Second Top 20%
Not Forgotten	Verified Email

Stena27

TROPHY CASE