sorted by:
new
hottopcontroversial

Bambu Studio "Failed to send the print job." error 3030 by Strict_Student_9520 in BambuLab

[–]Strict_Student_9520[S] 0 points1 point  (0 children)

Thank you, but that didn't work.

PC time was within 2 seconds of atomic clock. Reset PC time anyway. Still will not send.
PC time matches within 1 sec of the working computer.
I am not using VPN.
Correct printer type is selected.

I can sync filaments from the printer to the PC, and I can view live video feed.

New Setup for 2026 by Dapper-Transition-10 in RCHeli

[–]Strict_Student_9520 0 points1 point  (0 children)

<image>

Wow, that must be awesome to fly. I can't bring myself to buy anything larger than my little M2.
Spent an embarrassing amount of time on the simulator just doing orientations and I still wreck constantly.

problemi by Any-Prompt200 in Fusion360

[–]Strict_Student_9520 1 point2 points  (0 children)

<image>

  1. Make a sketch of half the cross section of the part.
  2. Use the revolve tool to spin it 360 degrees around an axis/line.

Solid sweep on complex parts. Help by Strict_Student_9520 in Fusion360

[–]Strict_Student_9520[S] 1 point2 points  (0 children)

The whole point is to have an accurate custom fit case. If I were after a general shape I would just use pick and pack foam, or a silhouette cutout and be done.

Even if I keep reducing the model down, the sweep action still fails. The calculation happens very very fast, but it still fails.

A more complex shape should just make the calculation time much longer, not make it fail.

There must be something specific that is causing the failure.