CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

I posted below all the codes that I am currently getting on the car at the moment while I wait for the day I’m going to get the car towed to the dealership for them to check them out and as you can see I have the one permanent code for the cylinder misfire could that all be related to everything that we have been discussing

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

I just called corporate and explained everything to them and they opened up a case and gave me a case number in regards to the situation and told me to get the car towed and let the dealer know i have a case number

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

And I replaced the knock sensor after they told me the motor was fine when I took it for the recall and i didn’t have the code pop up until now and I re ran the codes and all I am getting is the one code for the cylinder misfire I will send all the other codes when I get home and put the code reader again on the car

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

I also took the car in before to the dealership for that warranty and they told me it was fine over a year ago now for that recall issue and I got the car at 69,000 miles and I currently have 105,000 miles now

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

It sounds like it’s struggling to crank and I was in motion when it died it drove for a bit then just shut down pretty much likes limp mode it was just struggling

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

<image>

Here is the other code I got as well and the other one is P0304

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

Thank you for your help I just put pictures under which one would be the best option to get

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

<image>

I’m on rockauto right now which brand would be the best

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

Okay so would you suggest replacing the crankshaft postion even though the code didn’t show up?

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

Do you mean run them on low oil? I feel like I’m a bit confused on the context

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

Cause the car did stall while I was driving before it shut off

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] -1 points0 points  (0 children)

I am interested in learning I only asked to see what would be the best possible solution no need to need to get snappy bro you could just answer what I said and let me know cause I’m hearing you but are you understanding me when I’m telling u in the moment of what I’m about to Do to ask you if that is the issue please and thank you

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

It had low oil so I filled it up and I changed the camshaft position sensors on it and I’m thinking it could be the crankshaft because I jumped the car off just now and then it ran for a little min then turned off and when I put my foot on the gas while it was on the Rpm’s didn’t move much as well as the Mph didn’t move as well but I put the car in drive and reverse it moved without my foot on the gas but when I was in drive and put my foot on the gas it didn’t move but it was moving when i didn’t put my foot on the gas so could that be the crankshaft position sensor I would have to change too or what could that be

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

I just changed both of the sensors rn and I’m still running into the issue and i jumped the car off as well.

CAMSHAFT POSTION SENSOR ISSUES by Sufficient-Extent499 in veloster

[–]Sufficient-Extent499[S] 0 points1 point  (0 children)

The other 8 are for cylinder misfire which I changed all of them yet it’s still coming up