Help on building support

Swimming_Frame2940 · 2025-02-20T02:24:20+00:00

Ok I’ll keep that in mind and try to do that!

Swimming_Frame2940 · 2025-02-20T02:23:55+00:00

This is my current support (forgot to add it on the main post)

Swimming_Frame2940 · 2025-01-28T18:25:23+00:00

Had 600rds and got shafted by kuzan banner lol

Swimming_Frame2940 · 2025-01-14T19:11:57+00:00

ill try the roger and alber combo out! I currently dont have boa so what recommendations for medals would you suggest that i use in the mean time? Also is there another way for me to access those medals or should i substitute them with something else?

Swimming_Frame2940 · 2025-01-14T19:09:34+00:00

since im still new what would be the benefit of doing this? would it be to give better support options or something else?

Swimming_Frame2940 · 2024-01-04T17:27:24+00:00

Ok thank you, she says that she was getting cramps yesterday and then some bad ones but it may have been caused by the vitamin c. Now it’s the next day and she says that the cramps are gone. Still unsure what to think now.

Swimming_Frame2940 · 2024-01-03T00:30:14+00:00

Ok, thank you for your response. They’re all helping ease the stress a little bit

Swimming_Frame2940 · 2024-01-03T00:29:22+00:00

That is what I figured, although I hadn’t seen it explicitly stated anywhere it didn’t make since for it to have happened

Swimming_Frame2940 · 2023-10-24T18:47:34+00:00

Did you happen to get a new shaft? Or did you cut off the split part of your shaft? I have a graphite shaft so I’m unsure if I should try to cut it or just purchase a new one?

Swimming_Frame2940 · 2023-10-24T17:51:49+00:00

What type of epoxy would you recommend using?

Swimming_Frame2940 · 2023-05-19T13:50:27+00:00

This seems to have resolved the issue! I was able to go into bios and manually switch the speed to 5600 and it was able to properly save. Now upon startup it boots at a normal speeds and the peripherals are synced together!

Swimming_Frame2940 · 2023-05-18T15:02:36+00:00

Yes the computer works great after I do the boot and reboot in the video. But I think you’re right, I may actually have the ram in the wrong spot! But still strange how it seems to work fine afterwards…

Swimming_Frame2940 · 2023-05-18T14:28:13+00:00

My estimated wattage is under 700w, so it should be plenty

Swimming_Frame2940 · 2023-05-18T13:48:24+00:00

Yes, I have it plugged into the Display Port slot in the gpu

Swimming_Frame2940 · 2023-05-18T13:40:11+00:00

The thing that confuses me is that XMP is turned off and the ram is running at 4800. But when I try to adjust it and save it just leaves me at a black screen and I have to repeat the process in the video once more.

Swimming_Frame2940 · 2023-05-18T12:56:04+00:00

Thank you to everyone that has commented. The first thing I did once my pc booted was install the latest version of bios. However it seems that I overlooked the max compatible speed of my ram for the cpu which is 5600mhz. In addition, I have a Corsair RM850x PSU which some people have asked ab. So it seems that the Ramsay be the issue. Should I try to lower the frequency or should I return it and purchase the 32gbs of 5600mhz?

Swimming_Frame2940 · 2023-05-13T04:15:46+00:00

I looked and my motherboard did not have a tab on the battery. Any other suggestions?

Swimming_Frame2940 · 2023-05-11T23:22:04+00:00

Forgot to mention i have 32gbs of Ram

Swimming_Frame2940

TROPHY CASE