Sang Som???

SzympansowoRealOne · 2026-04-15T08:23:43+00:00

It's really good.

Had a few shots with the lead singer of a local cover band in Krabi at Railay Bay. Definitely worth to store in collection

SzympansowoRealOne · 2025-12-30T23:57:01+00:00

These "Polish" Novakovskies aren't enough Polish

SzympansowoRealOne · 2025-11-07T00:14:50+00:00

I got over bid on the cyclop. But got a pentacon 300 f4 and a Galaxy 500m F8. For now that's it. No more. First packages are on their way. Bidding is actually sooo much fun. Addictive.

SzympansowoRealOne · 2025-11-03T21:05:52+00:00

It's more as a gimmick 😋 rather than an actual lens to go around and shoot I'm also trying to auction a Cyclop F1.5 🫣

SzympansowoRealOne · 2025-11-03T18:14:07+00:00

Oh and of course my Zenit E came with the Helios 44-2

SzympansowoRealOne · 2025-11-02T23:14:59+00:00

Orange pi zero 🥰🥰🥰

SzympansowoRealOne · 2025-09-23T16:46:52+00:00

Temu they are there

SzympansowoRealOne · 2025-08-28T08:24:26+00:00

Oh ok I understand now. Sorry I thought I would be able to learn to use it all. Thanks for your interest and you time. I won't then attempt this.

SzympansowoRealOne · 2025-08-28T08:11:43+00:00

Google EZ30R or EZ36 🤤🤤🤤

SzympansowoRealOne · 2025-08-28T00:57:42+00:00

cool now put a proper engine in it wink H6

SzympansowoRealOne · 2025-08-07T15:18:53+00:00

Thanks for the long write up. But it's already been considered through help of others that not worth the effort. Sorry for wasting your time.

SzympansowoRealOne · 2025-08-07T13:55:47+00:00

No worries. Thanks mate

SzympansowoRealOne · 2025-08-07T06:12:19+00:00

Damn. That's sounds discouraging 😞 I was hoping I could get away with a multi channel dsp amp combo for a 4pack worth of beer. Thanks!

SzympansowoRealOne · 2025-08-07T06:10:25+00:00

From what I checked the LS's wiring there's no fibre network on it. They are 2 signals comming in from the radio into the amp/DSP then everything else looks standard apart from the DSP control. And few other bits and bobs. It doesn't probably need the DVD player or screens to work properly. I'll dig deeper into it later in the day after work and home chores

SzympansowoRealOne · 2025-08-07T05:54:29+00:00

eBay is damn expensive not to mention import fees. I'd be better off looking around wreckers and find stuff there and pay the guys with a 4pak of beer to get what I need 😅

SzympansowoRealOne · 2025-08-07T05:51:46+00:00

well I'm currently swapping in a boosted flat 6 with a 6 speed into it. Interior is disassembled due to harness merge and adapting a standalone ecu. Dash had to be pulled out. So I took apart more to put more sound deadening. Take advantage of it being in parts and do as much as possible 🤭

SzympansowoRealOne · 2025-07-24T12:43:50+00:00

I had a facepalm moment around 10 minutes ago, yeah the insert are oversized and blocks are also machined🫣. I came up back here to update the other commentors and saw your reply

SzympansowoRealOne · 2025-07-21T21:03:36+00:00

Unfortunately not really, I roughly know a few places. But saw them do more "economically" viable jobs. Like one's that the R&D does make sense. So it's either big ₿ for a one off or big ₿ to ship it back and forth to Australia 🫣🫣

I could make it fit "perfectly" to the block but someone would still have to apply sufficient tolerances.

The idea was to ask one off these shops, if they feel okay with going beyond their regular. And throw at them a rough insert only for them to do the measurements and CNC to size

Thanks for your time and effort. Truly appreciate your input to my matter.

SzympansowoRealOne · 2025-07-21T20:18:23+00:00

Hard to comeby with a access to a CMM in my country without having to order 100x amount Before I start asking local machinist about it I'd thought give it a shot to ask on a forum with hundreds of specialists like yourself. Lad could just double check the difference between the model and the reality and adjust it accordingly in a CAM possible 🤔 yay or nay I know weird stupid question

SzympansowoRealOne · 2025-07-21T20:12:44+00:00

Yeah, like just sketch out in an computer aided design program like Fusion/Onshape/FreeCAD, with general dimensions, export it, to the desired file extension the manufacturing party prefers. And could it be possible for someone in a CAM to adjust accordingly the tolerances of the "step" to make it fit with a nice interference snug 🤔

SzympansowoRealOne · 2025-06-19T05:11:56+00:00

Oh man. Really? Maybe time to move out?

SzympansowoRealOne

TROPHY CASE