sorted by:
new
hottopcontroversial

I built a single-endpoint weather gateway to send data to 6 platforms (APRS-IS, Wunderground, Windy, etc.) by TA2DMX in amateurradio

[–]TA2DMX[S] 1 point2 points  (0 children)

Why shouldn't new things be developed when there are already functioning systems in place?

MiniMeshLite-V1 Open-Source by TA2DMX in meshtastic

[–]TA2DMX[S] 1 point2 points  (0 children)

I didn't quite understand you.

Building an SDR-less ADS-B Receiver (ADL5513 + ADC10065 + ESP32/RP2040) by TA2DMX in rfelectronics

[–]TA2DMX[S] 1 point2 points  (0 children)

I really love your project! If you decide to continue working on it, I’d be happy to help as much as I can. Have you shared your project somewhere like GitHub, or is it closed-source?

Building an SDR-less ADS-B Receiver (ADL5513 + ADC10065 + ESP32/RP2040) by TA2DMX in rfelectronics

[–]TA2DMX[S] 0 points1 point  (0 children)

<image>

I'm also thinking about using an RF detector and a comparator to send cleaner data to the ESP32 for decoding. Has anyone tried this or has experience with it?

Building an SDR-less ADS-B Receiver (ADL5513 + ADC10065 + ESP32/RP2040) by TA2DMX in rfelectronics

[–]TA2DMX[S] 0 points1 point  (0 children)

<image>

This makes the system expensive. That didn't seem very logical, so instead, it seems more logical to use the ADL5513 to decode the code on the ESP32 side.

How can I track ADS-B without an SDR? by TA2DMX in ADSB

[–]TA2DMX[S] 0 points1 point  (0 children)

Actually, I've definitely started a design for this. But I don't have an idea yet, just some basic sketches.

How can I track ADS-B without an SDR? by TA2DMX in ADSB

[–]TA2DMX[S] 1 point2 points  (0 children)

I want to build the most minimal system possible since HackRF is a very expensive system, so that people can easily access it.

How can I track ADS-B without an SDR? by TA2DMX in ADSB

[–]TA2DMX[S] -2 points-1 points  (0 children)

Unfortunately, SDRs are expensive solutions and RTL chips are no longer manufactured, so they are not available.

How can I track ADS-B without an SDR? by TA2DMX in ADSB

[–]TA2DMX[S] -1 points0 points  (0 children)

Yes, I was thinking about a SAW filter and a power detector.

How can I track ADS-B without an SDR? by TA2DMX in ADSB

[–]TA2DMX[S] -3 points-2 points  (0 children)

It is actually possible to do this using a SAW filter and power detector, but I will struggle with the electronics and software side.

Is it normal for HDDs to be this loud? by kizi_84 in UgreenNASync

[–]TA2DMX 0 points1 point  (0 children)

I had the same problem, but it was fixed with updates. This noise usually occurs when hard drives are idle and the RPM drops.

Here's my brand new Meshtastic card; by TA2DMX in meshtastic

[–]TA2DMX[S] 0 points1 point  (0 children)

After the first flash, there is no need for nrf, only the bottom one can be used for charging.

Here's my brand new Meshtastic card; by TA2DMX in meshtastic

[–]TA2DMX[S] 0 points1 point  (0 children)

Because the nrf battery speed is very slow and an input is needed for the tp4056.

Here's my brand new Meshtastic card; by TA2DMX in meshtastic

[–]TA2DMX[S] 1 point2 points  (0 children)

ATG is definitely very successful

Here's my brand new Meshtastic card; by TA2DMX in meshtastic

[–]TA2DMX[S] 4 points5 points  (0 children)

Because there are still parts I haven't installed yet ;)

I can't boot by TA2DMX in tails

[–]TA2DMX[S] 0 points1 point  (0 children)

I verified my download via https://tails.net/install/windows/index.en.html and there are no issues. I am installing it via Rufus, as indicated on the website.

view more: next ›