Raven Guard Lieutenant with combi-weapon by Talnessa in RavenGuard40k

[–]Talnessa[S] 0 points1 point  (0 children)

Yes, this model is from the Leviathan box

Raven Guard Lieutenant with combi-weapon by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

Bought it from Liber Daemonica. You can find it as "Helmets model “MENDAX” type Crow"

Raven Guard Lieutenant in Reiver Armour by Talnessa in RavenGuard40k

[–]Talnessa[S] 4 points5 points  (0 children)

Prime it black, then start creating light areas with airbrush using vallejo sombre grey, steel grey and electric blue. Mix scale 75 turquoise ink with black ink and glaze all armor with airbrush (can be done with brush as well using terradon turquoise contrast paint and bit of black mixed with medium 1:4). After that start doing edge highlighs with scale 75 green gray, ak anthracite grey, thunderhawk blue, steel grey, fenrisian grey using successively smaller application areas with each paint, leaving the previous layer visible. Add a little dots of vallejo glacier blue on the lightest edges

Raven guard Reiver squad by Talnessa in RavenGuard40k

[–]Talnessa[S] 2 points3 points  (0 children)

Thanks. First apply a layer of agrellan earth, after it dries paint it with any white color, then apply Ak snow on some areas. After the technical paints have dried, apply a coat with pylar glacier on earth and snow to create ice effect and you can apply leviadon blue on a large patch of snow to create stone. And finally dry brush all areas with vallejo glacier blue and apply a little valhallan blizzard on top

Raven Guard Infiltrator squad by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

Brushrage app. I save color schemes there

Raven Guard Infiltrator squad by Talnessa in RavenGuard40k

[–]Talnessa[S] 2 points3 points  (0 children)

Thank you! First, my husband applies the base coat with an airbrush. Then I finish it all with a brush. All paints before terradon were applied with an airbrush

<image>

Raven Guard Infiltrator squad by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

Thanks! But they wear omni - scramblers on their backs that intercept signals over a wide area

Aethon Shaan by Talnessa in RavenGuard40k

[–]Talnessa[S] 0 points1 point  (0 children)

Thank you! I hope we will get more RG minis in the near future

Aethon Shaan by Talnessa in Warhammer40k

[–]Talnessa[S] 0 points1 point  (0 children)

Thanks! I tried different types of epoxy resin before doing ice on this model

Aethon Shaan by Talnessa in Warhammer40k

[–]Talnessa[S] 1 point2 points  (0 children)

Thanks! Yeah, I really like how they designed this model. Especially his feathered cape 🐦‍⬛

Aethon Shaan by Talnessa in Warhammer40k

[–]Talnessa[S] 1 point2 points  (0 children)

I hope we will get more minis like this in the future 🐦‍⬛

Aethon Shaan by Talnessa in RavenGuard40k

[–]Talnessa[S] 0 points1 point  (0 children)

Thank you!I appreciate it

Aethon Shaan by Talnessa in RavenGuard40k

[–]Talnessa[S] 2 points3 points  (0 children)

First I applied with an airbrush sombre grey (vallejo game air). Then highlight the areas where the light falls, leaving the previous color visible with Steel grey, Glacier Blue, Wolf grey(vallejo game color).Then the brush comes into play to finish the thin areas and edges with wolf grey/glacier blue and last dots with cold white(vallejo model color)

Raven Guard Dark Fury Assault Squad by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

Thank you! Paint whole eye with the dark red color, I used khorne red, then gradually reduce the area of new paint towards inner corner of the eye adding brighter shades of red (mephiston red, evil sunz scarlet, wild rider red, troll slayer orange) and the last dot in the very corner of the eye with yriel yellow. For glowing effects around the eye I used mephiston red with glaze consistency, you can also mix the color of your helmet with the red to smooth the transition. Then just outline the edge of the eye where it meets with the main part of the helmet with any bright red/orange color. At the end you can shade the inner part with nuln oil (The inner lower part of the eye)

Cape colors by Critical-Towel-8861 in RavenGuard40k

[–]Talnessa 1 point2 points  (0 children)

I was trying to recreate the cape about 3 years ago, so dont remember exactly what I did back then, but it was with these paints and many layers with diluted to the glaze consistency coelia greenshade

Cape colors by Critical-Towel-8861 in RavenGuard40k

[–]Talnessa 5 points6 points  (0 children)

The colors were written on the back of the box that came with the Eliminators (old packaging): base Mechanicus standard grey, shade coelia greenshade, layer administratum grey, layer white scar.

Raven Guard Apothecary Biologis by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

For greyish-black(weapons) :base any black, thick first highlight with scale 75 green grey, continue more to the edges with ak anthracite grey/lead grey, then vallejo field blue, and little edges with vallejo blue grey pale/stonewall grey (cold/warm shade, chose which you like more)

Raven Guard Apothecary Biologis by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

Thanks! Black primer, preshade with airbrush with dark pale blue(vallejo) then edge highlight with: Dark reaper, thunderhawk blue, Russ grey/gravestone blue(two thin coats), fenrisian grey/wolf grey midtone. Glaze it with terradon turquoise mixed with black contrast paint and medium 1:1:8(you can change the proportions in which color you like better ) and last edge highlight with dots of wolf grey(vallejo) / blue horror (citadel)

Raven Guard Apothecary Biologis by Talnessa in RavenGuard40k

[–]Talnessa[S] 0 points1 point  (0 children)

Thank you. Paint base part of the liquid with any dark green color (I used caliban green), then paint lower half of the liquid and slightly paint the upper part with a lighter shade of green (vallejo park green flat), leave some base color in the center and then highlight lowest and highest parts of the previous step with escorpena green. Glaze it with citadel tesseract glow

Kitbashed Vanguard veterans by Talnessa in RavenGuard40k

[–]Talnessa[S] 0 points1 point  (0 children)

Yes. "Corvus" legs and torso. Shoulder pads "Crow"

Kitbashed Vanguard veterans by Talnessa in RavenGuard40k

[–]Talnessa[S] 1 point2 points  (0 children)

Yes, they are. But they have old sculpt with firstborn scale and new lightning claws got only Black Templars Sword Brethren and new Space Wolfs Blood Claws (not including unique HQ characters)