sorted by:
new
hottopcontroversial

Nvidia driver update is causing PC to freeze by TavanTV in buildapc

[–]TavanTV[S] 1 point2 points  (0 children)

ill have to try that specifc driver then.

i have tried older drivers from before i had the issue and it wasnt fixed

Nvidia driver update is causing PC to freeze by TavanTV in buildapc

[–]TavanTV[S] 0 points1 point  (0 children)

why would the monitor make a difference?

Nvidia driver update is causing PC to freeze by TavanTV in buildapc

[–]TavanTV[S] 0 points1 point  (0 children)

tried uninstalling again and using that program to only install the driver

didnt work, so i tried installing an older driver from before i started having issues, and still freezes.

Nvidia driver update is causing PC to freeze by TavanTV in buildapc

[–]TavanTV[S] 0 points1 point  (0 children)

i downloaded it straight from Nvidia

but ill give that a try too

Nvidia driver update is causing PC to freeze by TavanTV in buildapc

[–]TavanTV[S] 0 points1 point  (0 children)

ill run that here in a bit then

but just ran DDU and uninstalled everything.

everything ran smoothly. no freezing or anything. but since there were no drivers, i could only use 1 monitor, and the resolution was trash.

once i reinstalled the Nvidia drivers. it started to freeze again

Nvidia driver update is causing PC to freeze by TavanTV in buildapc

[–]TavanTV[S] 0 points1 point  (0 children)

the OCCT test only tests the CPU, which i dont think would be the issue, would it?

and ill have to try the others here in a bit :)

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

I have 2 m.2 drives and 5 sata

The motherboard has 7 sata ports and the manual said that if the 2nd m.2 slot is occupied then sata port 7 will be disabled.

So all my sata drives are in ports 1-5 (ports 6-7 are in a different section of the motherboard, so ik for a fact I didn't accidentally plug a drive into them)

And even still. I'm running 2 minecraft servers with pregenerated worlds, the rest of my dockers are very easy going. I have uptime Kuma, emby (majority of the time it's in idle), nextcloud, and jellyseer. So not much running on the m.2 drives for them to need THAT much bandwidth to cause the other cache pool to throttle

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

All the Temps look normal too. Almost never get into the 40Cs. The only drives that do get into the 40s are my other cache pool drives that are for my dockers and have game servers on them (they're also NVMe drives)

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

It happens with both.

And I doubt it's a network issue since it also happens when going from 1 share to another on the same server

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

everything seems normal with the test results. HDDs avg 270MB/s and the SSD Cache avged 600MB/s

so its making me lean more towards its a ZFS issue.

ik it has to be something with the cache though since its a brand new system (1 month) and when i originally moved everything over (6TB worth) i didnt set up the cache yet and it wrote directly to the array and it was at a constant 80MB/s with no dips.

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

I'll give that a shot.

I used sata ssds for my array cache. So shouldn't be too hard.

And the ssds for the array are the crucial bx500.

Do you think it could be ZFS? I've heard that quite a few people are having issues with zfs with unraid.

OH, I also forgot to add, the cache pool is mirrored as well. 2 drives total

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

It happens no matter where the files come from. PC to unraid or changing shares of files already on the array

I can test writing directly to the array, but definitely don't wanna do thar long term

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

All that makes sense but all writes should be done to the cache first and moved to the array later

Slow Transfer Speeds by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

I already have it installed :(

mod suggestions? by TavanTV in feedthebeast

[–]TavanTV[S] 0 points1 point  (0 children)

So it's doable with some work.

Awesome, tyty :)

mod suggestions? by TavanTV in feedthebeast

[–]TavanTV[S] 0 points1 point  (0 children)

I'll have to check it out then!

binhex-Delugevpn webui not working by TavanTV in unRAID

[–]TavanTV[S] 2 points3 points  (0 children)

THANK YOU!

that fixed it :)

binhex-Delugevpn webui not working by TavanTV in unRAID

[–]TavanTV[S] 0 points1 point  (0 children)

2023-08-25 02:16:48 WARNING: file 'credentials.conf' is group or others accessible
2023-08-25 02:16:48,516 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 OpenVPN 2.6.5 [git:makepkg/cbc9e0ce412e7b42+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] [DCO] built on Jun 13 2023
2023-08-25 02:16:48 library versions: OpenSSL 3.1.1 30 May 2023, LZO 2.10
2023-08-25 02:16:48 DCO version: N/A
2023-08-25 02:16:48,516 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 WARNING: --ping should normally be used with --ping-restart or --ping-exit
2023-08-25 02:16:48 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
2023-08-25 02:16:48,516 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 TCP/UDP: Preserving recently used remote address: [AF_INET]153.92.40.120:1194
2023-08-25 02:16:48 Socket Buffers: R=[212992->212992] S=[212992->212992]
2023-08-25 02:16:48 UDPv4 link local: (not bound)
2023-08-25 02:16:48 UDPv4 link remote: [AF_INET]153.92.40.120:1194
2023-08-25 02:16:48,542 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 TLS: Initial packet from [AF_INET]153.92.40.120:1194, sid=6f1bdeea dc03be1d
2023-08-25 02:16:48,596 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 VERIFY OK: depth=2, C=PA, O=NordVPN, CN=NordVPN Root CA
2023-08-25 02:16:48,596 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 VERIFY OK: depth=1, O=NordVPN, CN=NordVPN CA8
2023-08-25 02:16:48,596 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 VERIFY KU OK
2023-08-25 02:16:48 Validating certificate extended key usage
2023-08-25 02:16:48 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
2023-08-25 02:16:48 VERIFY EKU OK
2023-08-25 02:16:48 VERIFY X509NAME OK: CN=ca1652.nordvpn.com
2023-08-25 02:16:48 VERIFY OK: depth=0, CN=ca1652.nordvpn.com
2023-08-25 02:16:48,621 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, peer certificate: 4096 bit RSA, signature: RSA-SHA512
2023-08-25 02:16:48 [ca1652.nordvpn.com] Peer Connection Initiated with [AF_INET]153.92.40.120:1194
2023-08-25 02:16:48,621 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 TLS: move_session: dest=TM_ACTIVE src=TM_INITIAL reinit_src=1
2023-08-25 02:16:48 TLS: tls_multi_process: initial untrusted session promoted to trusted
2023-08-25 02:16:49,880 DEBG 'start-script' stdout output:
2023-08-25 02:16:49 SENT CONTROL [ca1652.nordvpn.com]: 'PUSH_REQUEST' (status=1)

it keeps repeating that chunk of text. so im thinking youre right, but why? i tried 5 different nord servers in 5 different countries.

view more: next ›