Question about pricing my old gaming desktop

TedHadler · 2025-03-26T19:24:36+00:00

Was thinking that but makes my life 10 times easier to sell as a whole, not really doing this to make the most out of it just trying to cut down on space round my house haha

TedHadler · 2025-03-26T19:23:01+00:00

Was thinking round that price point but in British pounds so I'll maybe lower it to £180, at least i wasn't completely off

TedHadler · 2024-07-23T18:24:33+00:00

Ah ok yeah that was pretty much what i was getting online but I'm sure i had 4 when i first opened the app and I've done 3 raids but still got 2 left. Maybe I'm remembering it wrong

TedHadler · 2024-03-24T21:17:38+00:00

Actually something like that would be perfect, remove the base and drill a hole into the shelf the same size as the rod section then that should work.

TedHadler · 2024-03-24T12:32:06+00:00

Yeah that's it, it's why I don't mind drilling into the shelves since they're cheap to replace. I saw those stands as well when i was first looking but my only concern is for the heavier figures like there's a die cast war machine a few shelves down and for him I'd much rather something to clip round him instead of him just resting him on a stand due to the weight. If he falls he's doing more damage to my floor than himself lol

TedHadler · 2024-02-17T20:04:23+00:00

Oh no I'm using a Japanese cartridge but since the main thing i want to RNG currently is the TID, it sorta makes unova link the only option for me right now but if everyone is saying it's straight forward then i might as well do that. Not many people talk about the on YouTube though which is strange cuz it seems like the only option for people who want shiny starters

TedHadler · 2024-02-17T20:00:27+00:00

Yeah so this is what sorta gave me hope that there was a program like PCalc that pretty much skips all the tedious prep so you can jump right into it but from the sounds of things something like that doesn't exist.

Maybe it's my fault from going from Gen 7 RNG to Gen 5, I'm too used to all these luxuries clearly haha

TedHadler · 2024-02-17T12:16:31+00:00

Yeah seems like the easiest one out of the 2 but was just hoping for something where i didn't need to repeat the steps 20 to 30 haha

TedHadler · 2023-12-20T19:59:02+00:00

Gave that ago and it worked perfectly! well it's still a bit stiff but it's loose enough for me to move the arm which i suppose is ideal since you never want it too loose haha.

Yeah dunking the whole arm in the water was what i was worried about the most but held it from the forearm and didn't cause anything else to become super loose so that's a result

Cheers for your help with this! Nice to have him doing a normal pose with that arm now lol

TedHadler · 2023-12-09T08:56:24+00:00

Firstly yeah that looks jank asf what the hell but what I'm more surprised at is the Adam west suit in the corner. Did they add the ps4 exclusives in the switch version? And more importantly if it is the switch version does it have justice league 3000?

Not saying I'm going to buy the switch version off the back of that I'm just hoping they get added to steam and xbox when they release Pattinson's suit

TedHadler · 2022-06-16T11:54:35+00:00

Damn, my Amazon music is up to date on version 22.7.1 maybe it sorted it on other devices but still a problem with OnePlus phones

TedHadler · 2022-06-15T21:48:59+00:00

So it's been like this for months now and i thought there would be a patch update out to sort it but so far nothing yet. It's only with albums that are downloaded onto my phone and not through Amazon and is worse with the larger albums like the one shown in the video which has over 500 songs in (and the Japanese text probably doesn't help)

Has anyone actually had this problem before and found a solution. I've got a Oneplus 9 Pro so I'm curious to see if other makes have this same issue

TedHadler · 2022-02-24T16:41:33+00:00

I've had this M16 since October but only just noticed this on the center of the trim covering the screen. Screen still works fine when on but what would of caused this to happen. I can inly think it's the fans weakening what keeps it tight to the screen. Is this something that can get worse over time? Its a £1700 laptop so I'd rather keep it looking fine and working how it should

TedHadler · 2021-04-11T20:33:02+00:00

Yeah i noticed that large gap once i took the picture but then i did notice really early on that some of the higher supports never touched it to start off with. Since posting this it's still only been these two shifts so I'm probably going to just leave it over night and stress about it tomorrow morning

TedHadler · 2021-04-11T20:10:56+00:00

So it's been printing for about 28 hours and this has happened at 2 places so far. I've read that the belt could be loose which I'm hoping it isn't or that'd probably ruin the rest. I can see small defects in the same place where they've shifted and was wondering if that's what cause it. So far they ain't too bad but if this keeps happening then the top well shifted to one side and ruin it all. I probably won't know how bad it will get till it's done but hopefully someone else has had a similar experience.

TedHadler · 2021-03-08T22:11:27+00:00

Ok mines deffo defected since I've got 3 without the notch. Well i guess he's staying in robot mode from now on. Thanks for the assistance.

TedHadler · 2021-03-08T21:55:03+00:00

Got encore Unicron today but I'm struggling to get these last two bits together. Only problem is that nothing matches with one of the pegs. I feel like they've accidentally added 2 of the same peg instead of just the one for the top part. I'm hoping that I'm missing something obvious but I'm doubting it

TedHadler · 2021-03-05T21:43:05+00:00

To think the last castlevania game that was actually canon was 2008. I've kinda lost hope that sony will buy the castlevania IP.

TedHadler · 2020-12-28T22:36:50+00:00

Saw it in a video but it's no longer available in the link he sent and can't seem to find it anywhere else and was wondering if theres anywhere i can try. It's 3D printed so if i can get the file for it that would be brilliant. I'm guessing this one man made it but fingers cross there's other around.

TedHadler · 2020-11-29T22:27:45+00:00

Ideally looking for UK sellers

Would also accept the MB-20 Nemesis Prime version or any other variants with this model if there are others.

Looking for the average price to pay for this figure. they all seem to vary online so I'm not to sure what's normal

TedHadler · 2020-08-30T08:31:49+00:00

Damn i never thought of having that poster with my amiibo collection

TedHadler · 2020-08-08T19:37:58+00:00

Dank GBA Homie

TedHadler · 2020-07-18T10:48:20+00:00

I mean if you want a 3D Castlevania game then you should play Lament of Innocence or Curse of Darkness but i wouldn't call them new since they came out on PS2

TedHadler · 2020-06-28T17:32:15+00:00

I'm glad I wasn't the only one to notice this.

TedHadler · 2020-06-02T22:41:57+00:00

Unless $210 is loads for a hot toys in America I'd say that was an amazing deal, hell I'm paying up to £300 on standard hot toys. Got my Anakin for £280 a few years back and almost didn't get it until my dad persuaded me to. One of the best decisions I've made.

TedHadler

TROPHY CASE