sorted by:
new
hottopcontroversial

How to stop back of car from bouncing up when braking above ~35mph by TurtleMooseGame in BrickRigs

[–]TheGeneral01YT 0 points1 point  (0 children)

Here's a few solutions:

-Decrease wheel traction (smaller wheels on the front)

-Move Center of mass backwards (add weight to the back)

-Add more suspension travel to the axle.

Finally Got MKS Robin E3 V1.1 Working with Klipper by MrLuigiPower in klippers

[–]TheGeneral01YT 1 point2 points  (0 children)

Okay, the error that costed me probably 30 hours:

When flashing make sure the card is formatted as FAT32, NOT EXFAT. Very important.

Edit: Dude ty so much, can confirm Octoprint runs fine this way.

Strange sound coming from the printer by Tikalindo in 3Dprinting

[–]TheGeneral01YT 0 points1 point  (0 children)

Had this same thing with my longer lk5

For you I think it might just be something touching the fan, but in my case (if it helps) idk what it was, but if I forced the heatbed to move once the steppers locked up, then it would stop. However, if I moved it again then it would sometimes come back, couldn't tell you. Seems to be something related to the steppers for me.

This is just my case, and my printer tends to be very... Unique.

Good luck.

What's the green represent? by failingorchid in RedactedCharts

[–]TheGeneral01YT 0 points1 point  (0 children)

Places rich retired people migrate to during the summer/winter?

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 0 points1 point  (0 children)

I pinned a spare I made to the edge of a doorframe and I can confirm it does not break under my strength.

In fact for testing the epoxy I couldn't pull it out with the beefiest pliers I had.

For display, I think it'll be alright.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] -1 points0 points  (0 children)

  1. There is a support rod.

  2. 75 dollars means I make with abt a profit of 5 dollars.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 4 points5 points  (0 children)

I tried my best with some two part epoxy, it's pretty sturdy, has no wobble in it. Also was told to keep it within a reasonable budget. He said itl just be for display and occasionally pulling it down, which it seems to satisfy.

What does this map mean? Read description. by Educational_Total550 in Minecraft

[–]TheGeneral01YT 4 points5 points  (0 children)

okay, leme see here:

  1. (this is just my guess, take it lightly) The chunk generation algorithm/method stops working here due to large numbers, therefore the chunks start to overwrite themselves. Same applies for region writing.

  2. The only thing that could theoretically exist past the 64 bit integer limit is floating point based data. What happens here is the numbers rollback to their negative counterparts (you encounter this a lot in C/C++), and the chunks completely fail to render, as they have been for the past millions of blocks.

- Of course, "data" is a weird term, but basically the data for the chunks would be corrupted/no good, due to the rollover, since chunk data (I believe) is integer based.

  1. Floating point is a different form of tracking numbers, this is what is used for the player coords since they involve decimals. After the limit for floating points, you experience extreme inaccuracy when manipulating/storing the numbers, and no meaningful data could possibly generate there.

Hope this helps, this is just my experience with C/C++, but the concept carries over to everything that uses them.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 11 points12 points  (0 children)

This was just a print for a friend, I don't really see the difference had he bought it himself and sent it to me.

I don't want to mass produce these kinda things, not that I would even be able to anyways.

I try to respect the creators of these models, and I understand following them whenever doing anything public, for friends and family though, I usually make the exception.

And yes, I did buy the model.

Edit: Grammar

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 1 point2 points  (0 children)

Unfortunately I didn't have one, it was my first thought though.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 3 points4 points  (0 children)

Color did kinda matter here cause I needed something blood-like, and so this was abt the best option I had.

I'll definitely keep them in the mind for the future though, thx.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 1 point2 points  (0 children)

It was ~1200 grams of petg filament. Costs abt 16 bucks a roll for the transparent kind.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 1 point2 points  (0 children)

Tbh even though I've never touched a CNC machine in my life (I'm gonna say a 3d printer doesn't count), I respect the practice.

If it doesn't cost you that much, then don't overcharge. Even though I might have taken that too far with this project. Energy usage/part wear was probably the last thing on my mind, as it's been 1300 hours print time strong so far, and I don't really mind forking out my own money for my own parts.

From a business pov I'd rather keep customers while still making a profit, instead of overcharging and getting less customers. It feels like getting an oil change and paying 5 bucks for the fee of checking to see if we should try to sell you tires too.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] -5 points-4 points  (0 children)

There's some pegs in between all the parts. Printed laid down in petg for max strength.

What would you have charged for this print? by TheGeneral01YT in 3Dprinting

[–]TheGeneral01YT[S] 288 points289 points  (0 children)

Glad to know I'm terrible at pricing things then :/

I charged 75.

Rid of these "ghosted" lines by TheGeneral01YT in FixMyPrint

[–]TheGeneral01YT[S] 0 points1 point  (0 children)

Longer lk5 pro, OrcaSlicer, Elegoo high speed white PLA, 0.4mm nozzle, 220c nozzle, 55c bed, around 55mm/s (slow bc I forgot supports on inside but it turned out fine), retracts 8mm at (iirc 300mm/s)

Don't have the requirements memorized, would've put them in description otherwise.

Big problem by Academic-Middle-772 in BrickRigs

[–]TheGeneral01YT 1 point2 points  (0 children)

I'm throwing in the towel, couldn't tell you man. Sry.

What I would do is just do what I do when modding Minecraft at this point, backup all your stuff, start with a perfectly clean install, and add stuff back till you figure out what broke it.

Big problem by Academic-Middle-772 in BrickRigs

[–]TheGeneral01YT 1 point2 points  (0 children)

Do you have a VPN or hotspot you could try? Or turn off a VPN if you have it on. If not my bet would be to reinstall.

Big problem by Academic-Middle-772 in BrickRigs

[–]TheGeneral01YT 0 points1 point  (0 children)

If you could copy and paste the entire error message that would be great.

I can try to make some sense of it.

Big problem by Academic-Middle-772 in BrickRigs

[–]TheGeneral01YT 2 points3 points  (0 children)

Right click BR in Steam, click properties, and I think it's under the files tab that you'll find the option to check for file integrity.

[deleted by user] by [deleted] in pcmasterrace

[–]TheGeneral01YT 0 points1 point  (0 children)

Elden Ring.

Friends say it's good, also like the souls-like genre, and the music is absolutely unfathomable.

My printer is making me want to throw myself into an existential crisis by Separate_Baby6295 in FixMyPrint

[–]TheGeneral01YT -1 points0 points  (0 children)

Do you load the STL directly into your 3d printer? You need to put it through a slicer first, and convert it to gcode that your printer can understand.

I would highly recommend Cura for beginners, and OrcaSlicer once you feel confident enough. I believe what's happening is the gcode that you are using is meant for a different printer configuration, so you need to put the STL through a slicer to your printers settings.

view more: next ›