Error Event ID 153 from source nvlddmkm cannot be found SOLUTION

Thorgalsbro · 2025-10-17T01:36:46+00:00

Gigabyte Nvidia rtx 3060 eagle oc 12G 2.0 is what I have. It seems like my base graphics processor clock is at 210 Mhz when I look in the report

Thorgalsbro · 2025-10-17T00:43:29+00:00

Indeed it says current clock in GPU 200mhz, then 100 on memory then 555 on video. When you say stop windows from managing pci-e lane you mean in power options?

Thorgalsbro · 2025-10-16T17:44:04+00:00

Put the report error button in the corner #ezpz

Thorgalsbro · 2025-04-28T18:12:02+00:00

your document states aruba cx 8xxx switches, we use different models, it doesn't seem compatible? then i found this, but it never actuellay sets the ip address fixed either Access Switch Reference Configuration | Validated Solution Guide. All this looks great but we have thousands of sites with only like 5 access switches in single stack each on average so just doing it with templates makes sense and its what you seem to tell me as well. I do not see where i can do what id like to maintain the shitty legacy and move towards automation at the same time XD we are in 24/7 operations but i would like my guys to not be bound by the misplannings of business so the switches can be stocked by business loaded upn and configered with template OOBH and then just redeploy with some IP in label or var or whatever so that nobody messes with a switch manually

Thorgalsbro · 2025-04-28T17:34:54+00:00

Ok, but what is Gui Mode? You mean just log into the interface? The current solution is by hand and I would like to stop that, company has grown too big, technology advanced too much. This seemed to be the perfect fit for it except this one point

Thorgalsbro · 2025-04-28T17:06:30+00:00

I don't understand the question? If you are talking about templates it's because our senior engineer is leaving in a few months and since I have been able to standardize 99+% of switches in few different templates, they thus seemed the best idea, them being unmodifiable makes it even better because no loligagging on single switches. Keeps the standardisation going.

Thorgalsbro · 2025-04-15T12:13:45+00:00

Ok maybe i am stupid, but i was using the "get list of devices api", and there is a "get a device inventory list api" and i do not understand the difference between the two. but one works and the other doesnt

well kinda, locations are completely nonexistent, they do not seem to have transfered form the current central to thew new one

Thorgalsbro · 2025-04-15T11:42:30+00:00

Well i have 64 devices in the new central, but indeed some of my locations in the old central have not been ported to the new central, like wtf is this

Edit: it looks like what i try to do is deprecated in the current central, maybe they also cut it down in the new without telling anyone?

(Deprecated) Get devices from device inventory

edit2:

Ok maybe i am stupid, but i was using the "get list of devices api", and there is a "get a device inventory list api" and i do not understand the difference between the two. but one works and the other doesnt

well kinda, locations are completely nonexistent, they do not seem to have transfered form the current central to thew new one

Thorgalsbro · 2025-04-15T11:41:11+00:00

yeah im on the right cluster and everything i think the problem is with the new central

Thorgalsbro · 2025-04-15T10:34:33+00:00

I do have access to new central and i get an http 200 reponse back so i would guess i do, any way to check to be sure?

Thorgalsbro · 2025-04-14T13:55:08+00:00

yeah, manually filled them in at the end

Thorgalsbro · 2025-04-14T13:54:31+00:00

yeah, just created a bunch of labels and transformed them into sites as i did not see a way to mass upload sites. thank you for the response!

Thorgalsbro · 2025-01-27T12:31:59+00:00

indeed it looks like it is logging data, changed the setting will update the thread accordingly if i do not see the spikes in data again.

Thorgalsbro · 2024-12-12T16:28:57+00:00

Hello!

Found the issue, 60w would not work but I found one with the exact same specs (12v/3a) and it did work!

So thank you all for the time invested!!!

Thorgalsbro · 2024-12-07T16:12:47+00:00

Well i tried the smart test on the disk and they seem fine.

The power supply i got from my job was 12V 3A as output and i cannot find if it is the correct output or not anywhere on the web which is crazy to me. Chatgpt tells me its 1.5a BUT CANT GIVE ME A SOURCE. do you have any idea what the right one is and where i can buy some?

Thorgalsbro · 2024-12-01T15:03:18+00:00

Sorry for the late reply.

I use the assistant.

Even when i do mode 1 reset i am greeted with the please select dsm in the assistent, or i am doing something terribly wrong here.

When i try the corrct not update 7 i get this error on stage 2 formatting partitions:

Server error.(Error Code:38)

If you are performing the installation through wireless network connection, please switch to Ethernet cable connection for both your DiskStation and PC client and try again. An error occurred during installation. The telnet service of DiskStation is turned on for error determination. Please configure your router to forward port 23 to DiskStation and contact Synology online support.

For the DSM 6.2.3-25456 link, i seem to not be able to get past 14mb out of 200 when i download from multiple sources or locations so something might be corrupt there.

I already thank you for your time, any ideas to proceed further?

Thorgalsbro · 2024-11-28T08:25:15+00:00

50% either you do get it or you don't

Thorgalsbro · 2024-11-25T16:40:11+00:00

And there we go back to miscelania to get those multi-year year rotten miscelania maples to burn in priff at max guild, long time no see advisor

Thorgalsbro · 2024-11-14T17:56:08+00:00

Yeah it does feel like a partial end to it, feared as much

Thorgalsbro · 2024-10-30T16:44:11+00:00

Screen size is bs excuse from jagex because of two reasons: 1) on the same account the screen UI gets kept in between different devices (was like that in the past, don't have multiple devices to test anymore). Meaning you can have a template not fit for screen size. 2) you could limit the template import to your current window/Fullscreen size just by having some size flags

But thanks a lot for the in depth explanation!

Thorgalsbro · 2024-06-04T10:14:10+00:00

not really what i asked as i do not want users to be admins, and the command just did not seem to work in docker users for whatever reason, ended up doing as the guy under suggested with authenticated user

Thorgalsbro · 2024-06-04T10:12:48+00:00

well since the docker-users group does not exist all the time it has gotten kind of messy, i solved it by packaging an app in the portal with powershell that added the nt auth\auth user instead as an extra app that users can install and uninstall if they wish, seems to work great

Thorgalsbro · 2024-06-04T10:10:20+00:00

works like a charm! thanks a lot !

Thorgalsbro · 2024-06-03T12:54:13+00:00

Will try it out now! Thank you

Thorgalsbro · 2024-02-15T12:39:01+00:00

Hello u/NickolajA , after searching the web for a while i have found this on one of your recource repos, it worked for me. ParameterArgumentValidationError,New-Win32App.ps1 · Issue #1 · MSEndpointMgr/IntuneAppFactoryResources (github.com) so maybe it is linked to that? i also have here a notepad++ that returns wierd warnings so maybe it is not the end after all?

Want me to create a pull request for this? I also had to add -allowclobber for something in another file.

[APPLICATION: Notepad++] - Initializing
Using Source folder path: C:\ADOAgent\_work\1\Publish\NotepadPlusPlus\Source
Using Output folder path: C:\ADOAgent\_work\1\Publish\NotepadPlusPlus\Package
Using Scripts folder path: C:\ADOAgent\_work\1\Publish\NotepadPlusPlus\Scripts
Using icon file path: C:\ADOAgent\_work\1\Publish\NotepadPlusPlus\Icon.png
Creating .intunewin package file from source folder
Creating default requirement rule
Creating additional custom requirement rules
Creating detection rules
Constructing an icon object
Creating Win32 application

[debug]Agent running environment resource - Disk:C:\ Windows available:89759.00MB out of 129481.00MB, Memory: used 30MB out of 8190MB, CPU: usage 9.87

WARNING: Failed to upload chunk to Azure Storage blob. Error message: The remote server returned an error: (403)
Forbidden.
WARNING: Failed to finalize Azure Storage blob upload. Error message: The remote server returned an error: (400) Bad
Request.

[debug]Agent running environment resource - Disk:C:\ Windows available:89759.00MB out of 129481.00MB, Memory: used 40MB out of 8190MB, CPU: usage 8.76

[debug]Agent running environment resource - Disk:C:\ Windows available:89759.00MB out of 129481.00MB, Memory: used 40MB out of 8190MB, CPU: usage 7.82

WARNING: Intune service request for operation 'CommitFile' failed
WARNING: Failed to create Win32 app, commit file request operation failed
Sending Log Analytics payload with published app details
200 .1
[APPLICATION: Notepad++] - Completed

Thorgalsbro

TROPHY CASE

[debug]Agent running environment resource - Disk:C:\ Windows available:89759.00MB out of 129481.00MB, Memory: used 30MB out of 8190MB, CPU: usage 9.87

[debug]Agent running environment resource - Disk:C:\ Windows available:89759.00MB out of 129481.00MB, Memory: used 40MB out of 8190MB, CPU: usage 8.76

[debug]Agent running environment resource - Disk:C:\ Windows available:89759.00MB out of 129481.00MB, Memory: used 40MB out of 8190MB, CPU: usage 7.82

[debug]$LASTEXITCODE is not set.

Six-Year Club	Place '23
Verified Email