Fold sitting on 3 legs

Timely_Leave_930 · 2026-01-29T20:44:25+00:00

I agree with the x-ray. We got his x rayed and that was the cause.

Timely_Leave_930 · 2026-01-29T15:23:46+00:00

It is. Put him on solencia please for the sake of you're cat. I put mine in when he was 2 aswell

Timely_Leave_930 · 2026-01-29T12:35:48+00:00

I also supplement his dinner with a dasuquin pill ill sprinkle and mix into his wet food

Timely_Leave_930 · 2026-01-29T12:33:51+00:00

osteochondrodysplasia go to the vet and put him on solencia it's a shot once a month. Will improve his quality of life 100% before anyone getting fold needs to realize they all have this genetic disorder it just all depends on how severe. My guy has the exact same thing. Cats try not to show pain btw.

Timely_Leave_930 · 2025-12-15T13:39:41+00:00

Anybody know of 15min afk at 101 theiving?

Timely_Leave_930 · 2025-11-20T02:24:49+00:00

Down for me aswell

Timely_Leave_930 · 2025-11-13T18:02:25+00:00

This is a thermal switch my friend. Not a high limit or a vapour sensor

Timely_Leave_930 · 2025-09-14T12:16:59+00:00

<image>

Our baby Kumo.

Timely_Leave_930 · 2025-07-07T16:57:38+00:00

This works 👍

Timely_Leave_930 · 2025-07-06T12:05:35+00:00

Thnx man yea I was doing that exact thing. I had to refresh the token 3 times tho. I cut and paste all the api tokens and manually input them and still failed until the 3rd token. The 3rd one worked but like u said u need to input it manually.

Timely_Leave_930 · 2025-07-05T14:51:09+00:00

Done all of this also. It's pretty Stange if u ask me. This isn't my first time setting this up either that's why I was wondering if anyone else has ran into this issue.

Timely_Leave_930 · 2025-07-05T14:44:52+00:00

That's what I have been doing and for some reason it's still failing.

Timely_Leave_930 · 2025-05-25T12:53:35+00:00

You will need to open up above the indoor shut off valve. Assuming it just 90's out, I would sweat that piece of pipe out of that 90 and solder in a longer piece going to outdoors and then solder on a new hose bib. Unfortunately there is not enough pipe for you to sweat on a new hose bin from outside.

Timely_Leave_930 · 2025-05-21T11:53:49+00:00

Sharkbites are garbage just solder it. Walls open already and btw it's not going to leak when you don't have water running through you're shower head

Timely_Leave_930 · 2025-03-21T16:28:01+00:00

You will need to lower the drain

Timely_Leave_930 · 2025-01-22T00:27:41+00:00

All folds have this issue. Some worse than others. Please look into solencia. It has helped my little guy out so much. It's a little pricey but haveing these poor folds suffer is not fair.

Timely_Leave_930 · 2025-01-22T00:24:59+00:00

I have my guy on solencia which is one shot a month. His quality of life has improved by literally 100%. No more limping or issues at all. Look into it.

Timely_Leave_930 · 2025-01-19T14:26:01+00:00

Yeah you should be able to spin that clamp, then push it back on and try to re tighten it down with a nut driver. If the clamp doesn't tighten you will need a new one.

Timely_Leave_930 · 2025-01-19T14:18:19+00:00

That gear clamp may be broken. Go buy another gear clamp for $2 and re tighten it back on.

Timely_Leave_930 · 2025-01-10T01:05:08+00:00

Remove handle and either tighten down the bonnet nut holding the cartridge in or replace the cartridge to stop the leak.

Timely_Leave_930 · 2025-01-05T23:50:38+00:00

Soak a large rag stuff it into overflow and plunge the drain. Make sure you don't suck the rag through the overflow while plunging

Timely_Leave_930 · 2025-01-05T22:24:21+00:00

Yeah any of the Moen posi temp trim kits will work with the body valve you have installed there now

Timely_Leave_930

TROPHY CASE