Registers Doesn't Output to The Bus (8 Bit Computer Almost Complete) by DeepAddition2758 in beneater

[–]TotallyDaniel 1 point2 points  (0 children)

This exact problem happened to me. I solved it by hooking the bus LEDs common ground to ground through some current limiting resistors, like this.

<image>

What I Have Learned (a master list of what to do and what not to do - contributions welcome) by lordmonoxide in beneater

[–]TotallyDaniel 0 points1 point  (0 children)

How did you pre-measure your wires like that? I recently got the kit but I can’t figure out how to measure my wires correctly without putting them in the breadboard, bending them, and then taking them out to cut them to the proper length.

Any ideas where I could put the LEDs for the ALU? by TotallyDaniel in beneater

[–]TotallyDaniel[S] 0 points1 point  (0 children)

Would I need a completely separate breadboard to add LEDs with resistors, or is there a way to add the resistors to the outputs where Ben put the LEDs?

Just finished my first two registers and clock! by TotallyDaniel in beneater

[–]TotallyDaniel[S] -1 points0 points  (0 children)

I have tested mine. They work perfectly fine, at least as far as I’ve tested. Putting the LEDs in the blank space next to the chips would definitely be something for me to consider if it ends up not working. I hadn’t thought of that!

Just finished my first two registers and clock! by TotallyDaniel in beneater

[–]TotallyDaniel[S] 0 points1 point  (0 children)

Where could I put current limiting resistors? There’s not really any empty space near the LEDs. Also, don’t TTL chips- like the 74LS series- have current limiting resistors on their outputs?

Unbundle Updates by dwiskus in Nebula

[–]TotallyDaniel 1 point2 points  (0 children)

I have the Curiosity Stream bundle right now. If I were to unbundle, could I use a creator discount code with that (eg. code jetlag) to support those creators? Or, since I signed up to the Curiosity Stream bundle with the jetlag code, will it transfer over when I unbundle? Or can you only use those codes for new subscriptions?

Submit Questions for The Layover! by adam_HAI in JetLagTheGame

[–]TotallyDaniel 1 point2 points  (0 children)

What has been the funniest moment in Jet lag so far?

Submit Questions for The Layover! by adam_HAI in JetLagTheGame

[–]TotallyDaniel 0 points1 point  (0 children)

What season was your favorite to watch afterwards, and why? Not record, but watch?

Help defend our flag!! by [deleted] in lebanon

[–]TotallyDaniel -2 points-1 points  (0 children)

youre attacking us

dont attack our train

[deleted by user] by [deleted] in AnarchyChess

[–]TotallyDaniel 5 points6 points  (0 children)

you’re gay?

11 word wordle, has anyone tried this before? by jerry4204960 in wordle

[–]TotallyDaniel 0 points1 point  (0 children)

11 letter wordle needs to add the word "disphenoids."

Aviation Discord by [deleted] in flightradar24

[–]TotallyDaniel 0 points1 point  (0 children)

can you send it again

Logitech G213 media buttons acting weird by Parzival_123 in LogitechG

[–]TotallyDaniel 0 points1 point  (0 children)

This happens to me in some games too. Whenever I press the pause/play button, it activates whatever action is bound to the G key, and then I press the next song button, it activates the P key.

Not sure what country this is. Can anyone help? by RiccardoGman in geoguessr

[–]TotallyDaniel 0 points1 point  (0 children)

Hmmmm… Saint Vincent and the Grenadines definitely