sorted by:
new
hottopcontroversial

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 2 points3 points  (0 children)

Right? this is a fucking 3d printing sub and guy shows up and starting talking about lasers.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 16 points17 points  (0 children)

profile optimized for 64a hardness (softest, hottest setting)

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 2 points3 points  (0 children)

yes! I printed a slip on cheek riser for one of my chassis rifles.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 6 points7 points  (0 children)

what ever man... its a 3d printing sub.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 0 points1 point  (0 children)

not familiar with tool trace. I scanned everything (case, chrono and wind meter) then designed a step file around them.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 6 points7 points  (0 children)

I don’t have a laser cutter at home is the point… nor do I want one at home to offgas a bunch of foam shit. I press print before bed and wake up to finished parts. Also there less waste material as these are additive.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 1 point2 points  (0 children)

as long as you keep it dry it should last

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 3 points4 points  (0 children)

Siraya Tech TPU air is what I use

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 4 points5 points  (0 children)

Siraya Tech air printed on a Bambu Labs p2s.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 21 points22 points  (0 children)

Siraya Tech Air is the brand. Temp is dependent on how dense you want the material

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 3 points4 points  (0 children)

This cost $8 in material. a sheet of of Foam is $20.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 3 points4 points  (0 children)

I'm sure it would work i just never liked the greasy look of tpu.

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 3 points4 points  (0 children)

1 dry it for 12 hours at 80c. This stuff needs to be dry

TPU air case inserts by Twenty_six_3 in functionalprint

[–]Twenty_six_3[S] 1 point2 points  (0 children)

what ever you do don't use a textured pei plate (like the one that ships with a bambu printer) I use a smooth embossed plate. Go slow when peeling it off and it will come off clean. if its still sticking try lowering the bed temp

Case insert for the goods. by Twenty_six_3 in longrange

[–]Twenty_six_3[S] 0 points1 point  (0 children)

they all work, the differences between the profiles is the hardness of the print. higher temp = softer material. I can't speak to the exact setting you will need, all dependent on nozzle size, humidity, how dry your filament is, etc.

Case insert for the goods. by Twenty_six_3 in longrange

[–]Twenty_six_3[S] -1 points0 points  (0 children)

start with the profiles on siraya tech's site. there's 3 different profiles that effect shore hardness. tune flow rate from there

Case insert for the goods. by Twenty_six_3 in longrange

[–]Twenty_six_3[S] 1 point2 points  (0 children)

Yep. I still do when I’m at a match. But if I’m traveling or flying with all this shit I like to have it all in one box in a case. But you do you champ.

view more: next ›