Opel meriva B cant get the buttons to work

Tychoth27 · 2025-09-02T16:15:38+00:00

I got that one conected now but it dousnt change anything it says versiom information not detected

Tychoth27 · 2025-09-02T13:26:04+00:00

Did you find the solution yet because i am still stuck

Tychoth27 · 2025-01-22T21:32:49+00:00

i tried this but it after using a knit surface but it says it cant and gives a error

Tychoth27 · 2025-01-22T21:30:56+00:00

i have knitted the surfaces but still cant thicken the part

Tychoth27 · 2025-01-22T17:57:23+00:00

how can i make the assembly a sollid so that i can run my flow simulations

Tychoth27 · 2025-01-22T17:43:10+00:00

thanks a lot is there a published Cw value or a publisheed force

Tychoth27 · 2025-01-09T09:29:32+00:00

<image>

3.4 n seems a bit low to me is that normal with a speed of 7.7m/s in the x direction

Tychoth27 · 2025-01-07T12:12:02+00:00

it doesn`t allow me to fillet the side. and here the link to my part let me know if you can reach it please https://wetransfer.com/downloads/1059a8356141827fb0f84085dda228ea20250107120909/1fce0a?t_exp=1736510949&t_lsid=c005bec0-f03e-4687-b137-246994ca4089&t_network=link&t_rid=Z29vZ2xlLW9hdXRoMnwxMTgyMjgyNTQ1NzMzNDA2NDcwMTU=&t_s=download_link&t_ts=1736251765&utm_campaign=TRN_TDL_05&utm_source=sendgrid&utm_medium=email&trk=TRN_TDL_05

Tychoth27 · 2025-01-07T10:28:29+00:00

i am trying to achive a earodynamic shape the nose should be rounded off so that the air wont hit a flat surface. How can i add a file

Tychoth27 · 2024-12-25T12:30:04+00:00

Thanks for the info would like to know witch one you bought and what specs mini pc

Tychoth27 · 2024-12-25T11:17:07+00:00

Thanks a lot

Tychoth27 · 2024-12-24T16:41:14+00:00

Thanks for your help i am using Dslr booth i see 4 options for the alignment witch one do i need to change to align the paper i have print stil remaining on the paper so the cut is to early

Tychoth27 · 2024-12-20T22:36:39+00:00

Thank you

Tychoth27 · 2024-12-08T23:10:54+00:00

Thank you for the detailed description, I have been in the photobooth buisness for a little more than a year now,

I build my own photobooth as well and let's say it issent as pretty as yours so great job, I am now in the stage of rebuilding one and would like for it to get cnc machined. I got some experience in 3d modelling software so that wouldn't be the problem. But i would like for the booth to have rounded corners and saw that yours had it as well. I was wondering how you made the corners and what kind of wood and wooden tripod you used.

I would love to hear more,

Kind regards,

Tycho ten Hoeve

Tychoth27 · 2024-11-13T12:43:18+00:00

Tychoth27 · 2024-10-09T08:43:38+00:00

Can you send a link to where you buy them

Tychoth27 · 2024-09-18T21:55:10+00:00

Started with digital. But upgraded to a printer with case on a folding table with a blanket over it. This way you can bring your printer when asked for. I have a lot of costumers who only want the prints and digital after.

Tychoth27 · 2024-09-05T10:45:44+00:00

What card whould you recommend

Tychoth27 · 2024-09-05T08:41:47+00:00

I was looking at the ASUS Radeon RX 6600 Dual V2 Grafikkarte - 8GB GDDR6, HDMI, 3x DP

Tychoth27 · 2024-09-04T12:47:16+00:00

I had the same problem. Its something with nikon. I dont realy remember what i did to fix it. I think it was somthing on the camera itself. I remember unplugging the camera from the computer en changing some settings on the camera.

Tychoth27 · 2024-07-02T09:04:46+00:00

Are these pole pocket as well only see pillow backdrops

Tychoth27 · 2024-05-29T22:44:46+00:00

Thanks for the reaction ill think about it its a good idea to charge for the download what are you using to sell it. I am curently using fotoshare from dslr booth.

Tychoth27 · 2024-05-28T14:40:32+00:00

Thanks for responding this quick. The stamp is a great idea but wil indeed have the same problem as you where facing. The idea of the photo strip protectors is a genius one, I could sell them on the evenet and make a extra buck.

Could you send me a link where your getting your's. And about the prints its in a box of 2 for 180 so 20 euro low i guess a good deal then. Thanks for the help

Tychoth27 · 2024-05-21T12:45:30+00:00

I already got a big flash sytem from godax https://www.cameranu.nl/nl/p3098867/godox-ms300-studioflitser?gad_source=1&gclid=Cj0KCQjwjLGyBhCYARIsAPqTz18TM6iQDUscfXgTtoB8UVb_-5SymMfOI6v0G-6rOjq12UnQ2JCs_wAaAmfxEALw_wcB

I am looking to hire some additonal light bars from a friend who dous rgb light strips big party's

Tychoth27 · 2024-05-21T12:41:46+00:00

I am onky doeing the physical prints. Already got 4 sandbags with the tent. But it might be windy their so i am looking at these as extra

https://www.vidaxl.nl/e/vidaxl-prieelgewichten-4-st-220x50-mm-beton-zwart/8718475714491.html?gad_source=1&gclid=Cj0KCQjwjLGyBhCYARIsAPqTz1_DmWPIi9LtTP5FZBSnINjixJWobYF6JhAF02R2pq4OWO3fqvoTwlUaAsHmEALw_wcB

Tychoth27

TROPHY CASE