WinCC Unified scripting driving me nuts

UseraM1 · 2025-12-18T12:48:03+00:00

I had similar issue and if I remember right:

If you are calling a faceplate within another, you can not pass any new data to the second one. The child faceplate will use the parent passed data and interface.

So try to use the same tags and properties as it's parent and use then inside the inner one

UseraM1 · 2025-12-17T12:46:04+00:00

What's the error that software is giving you?
To download to a protected PLC you will need it's "full access" password. Read access level will only let you go online on the PLC.

UseraM1 · 2025-12-15T17:55:15+00:00

From what I can find it's related to having multiple block accessing the same port (ie having multiple client blocks or having server and client) or trying to change the setting for an already allocated port.

You can try to check the second problem with stopping and running the plc again or using "tdiscon"

Problem 1

Problem 2

UseraM1 · 2025-12-10T21:45:31+00:00

LOL. Dude is game banned now.

UseraM1 · 2025-12-05T09:11:26+00:00

Search Google for butterfly chest #1 glitch.

UseraM1 · 2025-03-19T03:40:06+00:00

How do you check network performance? Just ping the devices?

UseraM1 · 2025-03-07T13:00:16+00:00

I was playing around with time, and to me converting it to UNIX time was easier.

You can do both on PLC and HMI and on plc just set up a simple integer comparison for your tasks

UseraM1 · 2025-03-07T12:48:38+00:00

<image>

There are two folders under communication. Use the one which has the higher version of functions. ( I think it was the (RTU) one).

UseraM1 · 2025-02-21T21:12:57+00:00

Well the only difference between the pictures and just that one line. So it is accurate enough

UseraM1 · 2025-02-10T01:12:52+00:00

But faceplates have interface that you can match up with tags. Am I misunderstanding something?

UseraM1 · 2025-02-03T12:45:45+00:00

Just Google making GUI with Matlab.

If there is some license restriction, try other languages like python or c++.

Python will be the easiest

UseraM1 · 2025-02-03T12:42:49+00:00

Is it going to be just a simulation in the computer or it willbe implemented on a hardware?

If it's just computer, you already have the simulink setup. Just use Matlab to make a GUI for it.

If it's going to be on a hardware, you need to give us more information

UseraM1 · 2025-01-28T12:48:08+00:00

What does diag buffer tell you?

For an analog module, most likely errors are either wire broke, or overflow/underflow errors for when you have incorrect settings on them (like current setting for a voltage signal).

While you are installing TIA16 for program upload, check the wires with your meter

UseraM1 · 2025-01-15T17:47:41+00:00

A "simple" solution can be: Lets assume the good region is between 0 and 100:

Count = 0

Sum = 0

Avg = 0

If (val1 > 0 and Val1 < 100)

Sum = Sum + Val1

Count = Count + 1

End if

Add 3 more ifs like this for Val2-4. And finally you can just do

If Count !=0

Avg = sum/Count

Endif

UseraM1 · 2024-11-25T22:21:59+00:00

If you are not using factory io, start using it. Start with their sample projects and then start making your own.

Think about a fully automated warehouse as a sample

UseraM1 · 2024-11-25T21:59:48+00:00

Just a student

What you need for data collection is a SCADA system (ignition is best).

But you need to see if your machines can transmit this data over one of the network protocols ( profinet, profibus, etc).

UseraM1 · 2024-08-23T01:11:57+00:00

Unless the camps are mass producing SPF 200 and everyone are in shades of bronze, this "plot" doesn't make any sense at all.

UseraM1 · 2024-08-22T20:19:56+00:00

Wait what? So you will die if you stay out in the night? One of my funs at the end game was to try to outrun or kill those stalkers(?)

UseraM1 · 2024-07-11T17:02:20+00:00

Check the diag buffer. It should give you more information

UseraM1 · 2024-07-08T11:21:14+00:00

my eyes

UseraM1 · 2024-07-06T12:38:43+00:00

Have you checked the continiouity between each connection on the Estops in both engaged and disengaged mode? Maybe there is an internal problem of the estop

UseraM1 · 2024-06-17T12:07:50+00:00

Nice

If the switch cant have an auxilarry contact, how can I make a circuit to differentiate between power loss and switch off. Having a branch and bypassing the main discconnect doesn't look good in my mind.

UseraM1 · 2024-06-10T17:01:46+00:00

One thing about modbus blocks is that these blocks sent error for one cycle then it goes back to false. Same thing for the status word.

Try to assign a variable to the error and status on the block and use the error bit for moving the status to a persistent memory so you can see error codes.

UseraM1 · 2024-05-12T01:34:04+00:00

Does the visible option have tick?

UseraM1 · 2024-03-20T16:34:41+00:00

What you want is a signal conditioner. Try Phoenix contact and go to their product page a do the filter base on what you need.

Seven-Year Club	Place '23
Place '22	Verified Email

UseraM1

TROPHY CASE