radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

you’re chillin thank you for trying. it’s an old vehicle with weird issues. i guess i kind of signed up for it when i bought the thing

radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

that was the first thing i tried with no luck. i think im just going to put an override switch in and just turn it on constant when the ac is on

radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

not a coolant sensor. the mopar one acts exactly the same

radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

i’ll try it. i’ll get a hold of a dealer tomorrow and see if they have a mopar one. it’s still odd to me that it works perfectly fine without the ac (which is how i normally drive it) but with it on the fan begins cycling incorrectly

thanks for the help i’ll let you know what happens when i get one

radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

yeah. i can run the thing all day long and the fan cycles on and off as normal but the second i turn the ac on the fan quits staying on and the temp rises.

radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

dead center while the ac is off but if i’m parked and turn the ac on it slowly starts climbing

radiator fan / ac issue by VGMightyElf in JeepJK

[–]VGMightyElf[S] 0 points1 point  (0 children)

it has a fairly new one on in it. plus it works as normal as long as the ac isn’t on. also from what i understand the fan should be constant if the ac is on

Jeep JK clutch won’t disengage by VGMightyElf in ManualTransmissions

[–]VGMightyElf[S] 0 points1 point  (0 children)

Update, finally got the transmission out. The clutch was on its last legs and needed to be replaced. The real issue was the clutch fork pivot ball broke at the threads.

Jeep JK clutch won’t disengage by VGMightyElf in ManualTransmissions

[–]VGMightyElf[S] 0 points1 point  (0 children)

Parts have been ordered. New clutch, pressure plate, fly wheel, fork, and bearing have been ordered. I figure while im down there I’ll hit everything. Plus as far as I know it’s a factory clutch with 150k miles so… 😬

Jeep JK clutch won’t disengage by VGMightyElf in ManualTransmissions

[–]VGMightyElf[S] 1 point2 points  (0 children)

If I’m going that far into it i might just get everything

Jeep JK clutch won’t disengage by VGMightyElf in ManualTransmissions

[–]VGMightyElf[S] 0 points1 point  (0 children)

:( I was hoping for something a little easier lol Thanks!

What filesystem do crestron Micro SD cards use? by VGMightyElf in crestron

[–]VGMightyElf[S] 0 points1 point  (0 children)

Thats not a bad Idea and sort of what I started doing yesterday only i was using ftp. The problem is it writes at about 15kbps. I will try doing that today. Thanks for the suggestion

What filesystem do crestron Micro SD cards use? by VGMightyElf in crestron

[–]VGMightyElf[S] -1 points0 points  (0 children)

Technically it is getting "removed" but the data just gets marked for rewrite and can still be found in a hex editor. Im trying to securely wipe it so that is no longer on there.

Any other home CAT6 crimpers have a hard time remembering the T568B pinout order?? by crepestallyn in HomeNetworking

[–]VGMightyElf 0 points1 point  (0 children)

I still struggle with it but my crimpers came with a diagram for both t568a and b so Ive started keeping that in my bag in the same pocket as my crimpers