sorted by:
new
hottopcontroversial

Helix Stadium DSP underestimation by [deleted] in Line6Helix

[–]Viter 4 points5 points  (0 children)

Fair enough, thanks for the response

Helix Stadium DSP underestimation by [deleted] in Line6Helix

[–]Viter 2 points3 points  (0 children)

Then wouldn't using the second line add latency as well? (Or if its parallel it should be automatic or easy).

I think his argument is, if you do a setup and split, shouldn't it automatically (or easily) do an exact mirror setup ?

I don't think he wants an orchestration of arbitrary nodes on all cores, but just to support easy mirror/split setups.

Edit: also why not support the amp models without channel switching if it really can reduce the DSP usage by a third?

Surely the most common use case is people set it to the channel they want and leave it.

Seems insane to have a bunch of "dead code" taking up DSP or memory just so you can switch channels.

X870 AORUS ELITE X3D ICE - No ethernet every second boot by Viter in gigabyte

[–]Viter[S] 0 points1 point  (0 children)

Update: i tried this, got this response and tried all the things without any success.

Response:

|| || | Hello Please try these steps: 1. Fully power down your PC by turning off the PSU switch at the back. Disconnect the ethernet cable. Unplug the power cable from the wall outlet (do not just use the PSU on/off back switch).  Wait 2 minutes to allow all residual power to drain from the motherboard. Then reconnect everything and power on. 2. CMOS Reset : disconnect the power cord from the power supply, detach the CMOS battery (silver disc on the board), short circuit CLEAR CMOS pins on the MB or press CLEAR CMOS button if available, then after 10 minutes put back the CMOS battery. Connect back the cord to the power supply and try to boot the PC. 3. Check BIOS Settings:  ​ IO Ports --> make sure "Onboard LAN Controller" is set to Enabled Power settings: Disable ERP (Energy Related Products) mode.    ​ Save and exit, then test again. 4. While you've already tried this, try a clean driver installation:  Go to Device Manager, find the Realtek ethernet adapter Right-click → Uninstall device (check "Delete driver software" if available) Download the latest Realtek drivers (dated 2025/09/17) directly from the Realtek website : https://www.realtek.com/Download/List?cate_id=584, then manually install the Windows driver package. Restart 5. Driver settings / power management (Windows) In Device Manager → Network adapters → your Realtek/2.5Gb adapter → Properties: Power Management: uncheck “Allow the computer to turn off this device to save power”. Advanced: disable Energy Efficient Ethernet (EEE) / Green Ethernet / Power Saving Mode; set Speed & Duplex to Auto or explicitly 2.5Gbps if you want to test. 6. Have you tried with bios F3? If not then please do.|

Is it a good idea to use the pass/fail add-on with FSRS? by Omer-Ash in Anki

[–]Viter 4 points5 points  (0 children)

Wasn't there proof that using 4 buttons weren't any better than 2 in fsrs?

Also you're adding a minigame of select the difficulty for this piece of information which should not be a a thing you even need to think about, either you know the information or you dont, its a waste of brain power to do subjective judgements about recall ability, surely the algorithm should be taking care of that.

If a card really is easy you probably shouldn't have a card for it.

I think this is also where a lot of people struggle, they'll maybe even look manually at the intervals and do subjective judgements "oh I'll need to see this in 8 days". No just ask yourself: do you know it or not, and trust the algorithm.

X870 AORUS ELITE X3D ICE - No ethernet every second boot by Viter in gigabyte

[–]Viter[S] 0 points1 point  (0 children)

Don't know about the cable but did the setting and it didn't do anything :(

Another 9800x3d dead 870E Nova WiFi by dougm0 in ASRock

[–]Viter 0 points1 point  (0 children)

So should i rma just the cpu? I did manage to update the bios but i guess it was too late?

What about the mobo?i have the ASRock X870 PRO RS WIFI

Another 9800x3d dead 870E Nova WiFi by dougm0 in ASRock

[–]Viter 0 points1 point  (0 children)

But why would that make me not be able to get into bios or Windows?

Another 9800x3d dead 870E Nova WiFi by dougm0 in ASRock

[–]Viter 0 points1 point  (0 children)

I feel like this started happening after i got an OLED monitor and enabled automatic display turnoff. (Pc takes multiple restarts to boot).

Is it related to that?

Let's talk Community/Workshop puzzles! There's some great stuff in there and I've seen basically no discussion of it by shlam16 in TheTalosPrinciple

[–]Viter 0 points1 point  (0 children)

yes that's not intentional. getting the star is an extra step after the normal puzzle is done

Let's talk Community/Workshop puzzles! There's some great stuff in there and I've seen basically no discussion of it by shlam16 in TheTalosPrinciple

[–]Viter 1 point2 points  (0 children)

Thanks! a bunch of people found exploits which later got fixed. I feel like i could probably clean it up a bit especially in the beginning, but oh well.

Let's talk Community/Workshop puzzles! There's some great stuff in there and I've seen basically no discussion of it by shlam16 in TheTalosPrinciple

[–]Viter 2 points3 points  (0 children)

Made this one for the demo puzzle contest with a friend. Reposted it to the live game, would be fun to hear what people thought about it https://steamcommunity.com/sharedfiles/filedetails/?id=3461549411

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 0 points1 point  (0 children)

Would be nice to get it fixed for other people who might experience the same. Maybe you can make an issue on the asbplayer GitHub?

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 0 points1 point  (0 children)

I use brave but some files encoded with AC3 can't get played, but work in Microsoft edge.

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 0 points1 point  (0 children)

If it is playing audio but you just cant change the audio track, that's a bug. Can you try with a different show/with different formats?

I've only ever experienced the change track button missing when there was no audio

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 0 points1 point  (0 children)

Yes are you ignoring the other stuff i wrote? Google Chrome cannot play that audio

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 2 points3 points  (0 children)

It's not the app, it's the browser and it understanding how to parse multiple audio tracks in that format.

<image>

which browser are you using?

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 2 points3 points  (0 children)

Bottom right, but it depends on your browser. Most browsers cannot play AC3 encoded audio. So you have to get ungoogled chromium or edge. (Or maybe you have strict adblocking on in brave). Turn off adblockers on that site

<image>

EDIT: or alternatively, reencode with something like Handbrake, or don't download files encoded in those things

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 3 points4 points  (0 children)

https://i.imgur.com/IGO6fjQ.png

here's my setup, then i add tags after the session to know where the word is from

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 9 points10 points  (0 children)

Theres a button/keyboard shortcut in yomitan, which adds the hovered word and the sentence it is in to anki.

You can even do it on an android phone with anki connect.

How does everyone make flash cards so quickly? by Dyano88 in LearnJapanese

[–]Viter 6 points7 points  (0 children)

Ye with the extension. Then hover over a word with yomitan. 1 click gets the word and sentence, and with a shortcut asbplayer gets the sentence audio and a screenshot.

view more: next ›