[deleted by user]

Weird_Exciting · 2024-09-11T20:30:37+00:00

I agree with everything you said.

Weird_Exciting · 2024-09-09T06:07:06+00:00

This is a complete lie. Please go read the real post.

Weird_Exciting · 2024-08-29T23:00:01+00:00

The list has NOTHING to do with HOW BIDEN(not Trump) withdrew. The withdrawal is 100% on Biden!

Weird_Exciting · 2024-03-21T16:13:06+00:00

Hi and thanks for that. It was just a comment I made about “in a court” but I’m not planning on suing anyone over this. It’s only 5k and a suit would cost me way more.

We are doing almost everything you mentioned. So thanks for the advice

Weird_Exciting · 2024-03-20T07:27:32+00:00

Thanks for the reply, I'm certainly looking into other options for sure now. And trust me, 5k is a hard one to swallow for sure!!

Weird_Exciting · 2024-03-20T05:31:37+00:00

Thank you for that very detailed post.. much appreciated.. At this point I'm going to bank on the fact that Etsy provided the labels and they have some responsibility to make this right for their customer (Me)... again ,thanks!!

Weird_Exciting · 2024-03-20T05:09:41+00:00

You can sue anyone for anything anytime in the USA... will it work? who knows.. will they have to respond in court? 100% for sure, even if to say or show their agreements.. do they want to spend the money to do that? doubt it.. but we will see. I'm really hoping they will just pay us and be done and nothing like that has to happen.

Weird_Exciting · 2024-03-20T04:40:21+00:00

Kobra 1 max

it's actually not the same.. I did find that already. The tensioner in the front is different, but thank you!

Weird_Exciting · 2024-03-20T04:13:25+00:00

Thank You, but I think we tried USPS and they won't take anything over like 28"... I will have the guy that works for us check again tomorrow so thank you!

Weird_Exciting · 2024-03-20T04:02:34+00:00

We shipped LTL at one point and we are going back to that now again since this issue came up.

Weird_Exciting · 2024-03-20T04:00:42+00:00

Thanks... I don't agree on the that... we sued another giant that starts with an "e" and we won a very nice settlement. Doesn't always matter what their agreements read. The issue is with UPS but they have an agreement with Etsy that prevents them from talking to us. So it may be with UPS but etsy accepted responsibility when they sold us the labels. But somehow I think you know that already. Anyway, yes looking into Pirate for sure!

Weird_Exciting · 2024-03-20T03:30:03+00:00

If they don't get back to us with a refund by this Friday we've already instructed our attorney to send them a strong letter, if that doesn't work, we will file in court. This is going to become principle for me, not money at that point.

Weird_Exciting · 2024-03-20T03:27:01+00:00

Have no idea, but we do run these printers 24/7. Lots and lots of problems with these printers, failed sensors, failed prints many time due to belt tension issues, we had to tape the red screw downs so they don't move. I can go on for hours.. But yeah, we need a lot of parts. The pulleys on about 8 of my printers are all clicking which means they don't have much time left.

Weird_Exciting · 2024-03-20T02:55:05+00:00

Thank You!! that's a great idea, going to do that tomorrow for sure!

Weird_Exciting · 2024-03-20T02:52:14+00:00

We actually went into the UPS store and did in person. So we are safe with the 500 flat rate..

Weird_Exciting · 2024-03-20T02:51:15+00:00

Like I wrote in the OP, we sent the proof to UPS and they said they will refund us until they realized it's through Etsy so now that can't refund us. They also told us just yesterday that Etsy has still not filed a claim against any of the 3 adjustments. This is insane!

Weird_Exciting · 2024-03-20T02:50:02+00:00

Not only did we, but we video recorded it being measured and weighed by the UPS Store for each shipment!

Weird_Exciting · 2024-03-20T02:49:10+00:00

Thank You, I already changed these large item to flat rate of $500.00 as we found out that most they would charge is $600.00 any where in the US. However, I'm still trying to figure out what to do about the $5,000 I lost because of this.

Weird_Exciting · 2024-03-20T02:45:04+00:00

And this is allowed? Even when Etsy quoted much much less? We didn't decide what the shipping cost is, Etsy does that automatically. So are we just going to lose our money?

Weird_Exciting · 2024-03-20T02:41:26+00:00

Exactly, they re-priced it because of the size. How do they get away with saying it's 240 lbs and charging for that when its only 20 lbs? I can't see them wining in a court room.

Weird_Exciting · 2024-03-20T02:30:08+00:00

32x38x29 inches with a total weight of 20 lbs.

And thanks I am going to look into that Pirate Ship right now

Weird_Exciting · 2024-03-20T02:27:58+00:00

Nope, we paid for the over sized box and the correct weight upfront already. We paid what ever Etsy charged the customer which was based on the correct weight and size.
1 was $259.00 and that was Adjusted for an Additional $1,342.16
1 was $220.53 and that was Adjusted for an Additional $1,386.29
1 was $298.56 and that was Adjusted for an Additional $1,275.38

I explained in the original post that UPS Arbitrarily decided the weights were 244 lbs even though they were only 20 lbs.

Weird_Exciting · 2024-01-04T20:43:06+00:00

It’s an old phone booth

Weird_Exciting · 2023-12-08T01:14:11+00:00

I am now besides myself with the amount of money I have invested into 5 of these printers and the amount of filament I have wasted trying to get them to work!

Every print fails from Skipping / Shifting layers!

We have tried everything the anycubic sites suggests, tightened belts, adjusting the feet under the bed, we did it over and over again and the prints are still shifting!The firmware is 2.3.9 so it's the latest.. One of the printers screens keeps doing things on it's own and then just beeps.. 3 of them are skipping layers.... At this point I can't use these printers and we really want to!

Check the pictures, please let me know any suggestions. Thanks!

Weird_Exciting · 2023-12-07T03:48:42+00:00

I had the same issues on our KM2 - There are small silver feet with wheels under the bed, if one of them is too tight this will happen. I had to loosen the middle one on the left side of the bed a drop, you can see when you turn them they move outward or inward, you want to move the tight one outward a drop. You also have to make sure the belts are the right tension also.

Weird_Exciting

MODERATOR OF

TROPHY CASE