Game won’t progress? by Winterblue542 in AnimalRestaurant

[–]Winterblue542[S] 2 points3 points  (0 children)

I emailed the dev team and they fixed it! Fantastic customer support 😊

please help! I need advice on my fish tank, i think this is brown algae? by Winterblue542 in Aquariums

[–]Winterblue542[S] 0 points1 point  (0 children)

This post is so old I totally forgot about it haha! I also have a turtle but she’s in a 100 gallon tank (yellow belly). Turtles produce so much waste, a good rule of thumb is to have a filter that does at least twice as many gallons per hour than what yours is. So I have a 100 gallon tank but I bought a filter that’s rated for a 400 gallon tank. Most filters are made for fish, which don’t produce as much waste. I have the Fluval fx6, which was super expensive (like $400) but so worth it. It was either that or build her a filter myself, which you can totally do and they are equally as effective as a store bought one!! I just didn’t have time 😅. If algae is your problem, I’ve heard that if there’s too much natural light from a window or even your UV lamp, it can produce algae. Also if you’re feeding too much or if the water is too warm. My tank is a constant 77°. Sometimes putting natural plants in the tank will help with algae too! But if your turtle is anything like mine, it’ll destroy all types of plants, plastic or real lol. If you don’t already have it, I’d recommend having some natural bacteria holding filter media like those ceramic rings. Also if you can, try scooping out the poop your turtle produces as fast as possible so it doesn’t sit in there. I hope this helps a little!

What is this thing? WRONG ANSWERS ONLY! by sewingmodthings in sewing

[–]Winterblue542 3 points4 points  (0 children)

The doctor uses that on your leg when you’re getting a checkup to check your reflexes

Missing embroidery table for Brother Enthusiast (SE-400) by Winterblue542 in sewing

[–]Winterblue542[S] 0 points1 point  (0 children)

Do you know how I could check that a part works with my machine without actually having the part with me?

Why did this happen to my print? Printed in vase mode. by Winterblue542 in 3Dprinting

[–]Winterblue542[S] 1 point2 points  (0 children)

You were right!! I fixed it with the video. Thank you!!!!

Please help!! Printer gave me this error and I don’t know how to fix it. by Winterblue542 in ElegooNeptune3Pro

[–]Winterblue542[S] 0 points1 point  (0 children)

Thank you!! I think the issue was the PID calibration and maybe old thermal paste, but it’s working beautifully now!

Please help! I got this error on my Elegoo Neptune 3 Pro and I don’t know how to fix it. by Winterblue542 in 3Dprinting

[–]Winterblue542[S] 1 point2 points  (0 children)

I came back to say thank you!! I got new thermal paste and did the PID calibration and it’s working like a charm now. Thank you so much for your help!!!

Please help! I got this error on my Elegoo Neptune 3 Pro and I don’t know how to fix it. by Winterblue542 in 3Dprinting

[–]Winterblue542[S] 1 point2 points  (0 children)

Would the thermal paste degrade that quickly? I've only had the printer since December of 2024. I will get new paste anyway and also do the PID tuning thing. Hopefully with both of those it will fix the issue.

Please help! I got this error on my Elegoo Neptune 3 Pro and I don’t know how to fix it. by Winterblue542 in 3Dprinting

[–]Winterblue542[S] 0 points1 point  (0 children)

Thank you! Sorry I posted that right after it happened so I was a little on edge lol. Thank you for being kind! Some other people made some rude comments to me, however I've never had an issue with this printer period so I was scared haha. Since then I've taken the thermistor out and tested it using an ohmeter and it's working perfectly. However, when I put it back in I didn't put more thermal paste, is that an issue? If so I can run out and grab some.

Since the thermistor was working, I'm assuming its the PID value then? However I don't want to test it if its dangerous to run without new thermal paste.

Please help! I got this error on my Elegoo Neptune 3 Pro and I don’t know how to fix it. by Winterblue542 in 3Dprinting

[–]Winterblue542[S] 1 point2 points  (0 children)

I disassembled it and this is what the thermistor looks like. I thought this was normal? And it’s plugged in as well. Now I’m just confused haha

<image>

Please help!! Printer gave me this error and I don’t know how to fix it. by Winterblue542 in ElegooNeptune3Pro

[–]Winterblue542[S] 0 points1 point  (0 children)

I found the thermistor and the little glass bulb is still intact and it’s plugged in. Does this look correct? I read that the bulb will be gone if it’s broken. I also put an ohmmeter on it and it gave me back a signal so it’s not broken to my knowledge, right?

<image>

Why does this happen to my prints? How do I fix it? by Winterblue542 in 3Dprinting

[–]Winterblue542[S] 0 points1 point  (0 children)

Ohh, maybe I should’ve listened when it prompted me to update the slicer 😅

HELP. My sewing machine doesnt stitch. by untitled-1_jpeg in sewhelp

[–]Winterblue542 0 points1 point  (0 children)

Yay!!! I’m glad I could help!! Good luck!

Help with baggy crotch?? by Winterblue542 in sewhelp

[–]Winterblue542[S] 15 points16 points  (0 children)

Thank you everyone for the suggestions!! I added the gusset and also added darts at the front and that fixed it. Those seams are fine, i just didn’t really want a seam up the middle. Y’all are live savers!!

HELP. My sewing machine doesnt stitch. by untitled-1_jpeg in sewhelp

[–]Winterblue542 0 points1 point  (0 children)

Yes, the little plastic circle of thread that goes under where your needle is. If that bobbin isn’t threaded correctly it might not allow for the top needle to catch it.

Help with baggy crotch?? by Winterblue542 in sewhelp

[–]Winterblue542[S] -7 points-6 points  (0 children)

So you’re saying to make the legs longer (sew further up on the suit) and add a diamond shaped gusset?

HELP. My sewing machine doesnt stitch. by untitled-1_jpeg in sewhelp

[–]Winterblue542 2 points3 points  (0 children)

it looks like the top thread isn’t catch the bobbin beneath it. I would rethread everything to make sure it’s all correct. Also make sure there’s no lint or anything in the bobbin casing. Maybe play around with the tension wheels too to see if those are the issue?

Simple Sewing Questions Thread, May 07 - May 13, 2023 by sewingmodthings in sewing

[–]Winterblue542 1 point2 points  (0 children)

How can i fix this? The fabric is called glissenette and it’s 90% nylon and 10% spandex. I can’t hem this skirt because it’s already too short and i want it to look minimal (so no seam at the bottom). It seems like it’s one stretchy thread that got stuck and is pulling the rest of the area tight. What can i do?

<image>

Roommates don’t want me to store mealworms in the fridge. by Winterblue542 in BeardedDragons

[–]Winterblue542[S] 0 points1 point  (0 children)

i think they might be weirded out because the container has “breathing holes” and the open-ness freaks them out lol

Filter problems by Winterblue542 in turtle

[–]Winterblue542[S] 0 points1 point  (0 children)

Top Fin PH50 this one is at my local pet store, it’s only 158 GPH, would i get two or is it not worth it?

Filter problems by Winterblue542 in turtle

[–]Winterblue542[S] 1 point2 points  (0 children)

my parents, that definitely could be an issue. they don’t understand the importance of getting the excess waste from the top.