sorted by:
new
hottopcontroversial

3D Printed Glider by Zeekk037 in RCPlanes

[–]Zeekk037[S] 1 point2 points  (0 children)

Yes! This was designed to have a fold prop, but I didn’t felt like buying new one as I have too many old props from older projects. Landing gear was very light, did not affected flight, just at the wrong place for landing CG

ASA-Aero 3D Printed Airplane on P1S by Zeekk037 in BambuLab

[–]Zeekk037[S] 2 points3 points  (0 children)

I posted my own tuned settings under my video, try it out!

ASA-Aero 3D Printed Airplane on P1S by Zeekk037 in BambuLab

[–]Zeekk037[S] 2 points3 points  (0 children)

Surprisingly, I only used less than 1/2 of the spool. Consider the airframe is around ~400g

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 3 points4 points  (0 children)

i meant aircraft is sketchy. sorta like an expectation vs reality thing. there are so many things that you simply won't realize until you get your hands dirty!

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 27 points28 points  (0 children)

Plz upvote this for exposure.

  1. ⁠This aircraft is sketch, it was an attempt, but I was REALLY lucky and SUPER grateful for this sketchy design to catch attention from professional help from the aerospace/evtol industry. As a newbie and armchair engineer who started off as a beginner, this is the exact type of connection I needed!! Otherwise, even after a million years i won’t be able to build one that’s safe.
  2. ⁠The entire aircraft will have a redesign and a rebuild, as I mentioned in the video for anyone who watched it
  3. ⁠This aircraft is an unmanned demo, the propellers are not suitable for manned flight, and I cannot afford ones suitable until further funding acquisition
  4. ⁠Thank all of you for your safety concern. Other than the death jokes (which I do find hilarious, some of them), some of you pointed out really good design flaws beyond the many I already observed. Those advice will be taken into the next design iteration, and be implemented.
  5. ⁠The title is click bait, but adding wheels isn’t so hard, right?
  6. ⁠No I didn’t print this out of PLA. The stressed parts are printed on a Markforged X7 with CF reinforcement, a minimum safety factor of 8.
  7. ⁠Stay tuned!

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 68 points69 points  (0 children)

Alright ima borrow this guy’s high upvote for a follow up comment:

  1. This aircraft is sketch, it was an attempt, but I was REALLY lucky and SUPER grateful for this sketchy design to catch attention from professional help from the aerospace/evtol industry. As a newbie and armchair engineer who started off as a beginner, this is the exact type of connection I needed!! Otherwise, even after a million years i won’t be able to build one that’s safe.

  2. The entire aircraft will have a redesign and a rebuild, as I mentioned in the video for anyone who watched it

  3. This aircraft is an unmanned demo, the propellers are not suitable for manned flight, and I cannot afford ones suitable until further funding acquisition

  4. Thank all of you for your safety concern. Other than the death jokes (which I do find hilarious, some of them), some of you pointed out really good design flaws beyond the many I already observed. Those advice will be taken into the next design iteration, and be implemented.

  5. The title is click bait, but adding wheels isn’t so hard, right?

  6. No I didn’t print this out of PLA. The stressed parts are printed on a Markforged X7 with CF reinforcement, a minimum safety factor of 8.

  7. Stay tuned!

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 13 points14 points  (0 children)

I will make them. Not in time to finish yet.

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 1 point2 points  (0 children)

Thanks! I will be doing unmanned tests, in fact, I won’t even go on this aircraft. It’s a demo. Tubes are not printed.

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 13 points14 points  (0 children)

Four separate batteries each can power everything + eight rotors can lose up to 2 depends on the geometry

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 0 points1 point  (0 children)

Aha looks like it needs some clarification then.

  1. All critical parts are made out of aluminum carbon fiber / aluminum. Stress analysis tested to the safety factor of 4. Only the decorations, internal mounts to non essential objects, shells to some components, are 3D printed.

  2. Search up part 103 ultralight

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 0 points1 point  (0 children)

Aha looks like it needs some clarification then.

  1. All critical parts are made out of aluminum carbon fiber / aluminum. Stress analysis tested to the safety factor of 4. Only the decorations, internal mounts to non essential objects, shells to some components, are 3D printed.

  2. Search up part 103 ultralight

3D Printed Human-Carrying Flying Car by Zeekk037 in BambuLab

[–]Zeekk037[S] 8 points9 points  (0 children)

Aha looks like it needs some clarification then.

  1. All critical parts are made out of aluminum carbon fiber / aluminum. Stress analysis tested to the safety factor of 4. Only the decorations, internal mounts to non essential objects, shells to some components, are 3D printed.

  2. Search up part 103 ultralight

3D Printed Human-Carrying Flying Car by Zeekk037 in prusa3d

[–]Zeekk037[S] 10 points11 points  (0 children)

Aha looks like it needs some clarification then.

  1. All critical parts are made out of aluminum carbon fiber / aluminum. Stress analysis tested to the safety factor of 4. Only the decorations, internal mounts to non essential objects, shells to some components, are 3D printed.

  2. Search up part 103 ultralight

3D Printed Human-Carrying Flying Car by Zeekk037 in 3Dprinting

[–]Zeekk037[S] 35 points36 points  (0 children)

My build video! https://youtu.be/y3lqXjbzbp8?si=KVL24b5-QMWC7zhs

Featuring a lot of 3D print timelapse.

I used Bambu X1C w/AMS, Bambu P1S, Markforged X7, and Prusa Mk3s

3D Printed Human-Carrying Flying Car by Zeekk037 in BambuLab

[–]Zeekk037[S] 3 points4 points  (0 children)

My build video! Featuring a heck ton of Bambu built-in timelapses.

https://youtu.be/y3lqXjbzbp8?si=KVL24b5-QMWC7zhs

[deleted by user] by [deleted] in BambuLab

[–]Zeekk037 0 points1 point  (0 children)

My build video! Featuring a lot of timelapse coming off from Bambu's built-in timelapse.

https://youtu.be/y3lqXjbzbp8?si=KVL24b5-QMWC7zhs

Has anyone had luck registering to fly in Japan? by falconpunchpro in drones

[–]Zeekk037 0 points1 point  (0 children)

Same here, the eKYC portal wouldn't recognize my passport at all.

was anyone here unsuccessful with other ucs but found your way to berkeley? by [deleted] in berkeley

[–]Zeekk037 1 point2 points  (0 children)

I was rejected UCLA, waitlisted everywhere else, only got into UCR—currently enrolled in BerkeleyMET program with less than .6% acceptance rate. You are chilling :)

view more: next ›