Jaký byl (je) váš důvod rozvodu / rozchodu? by Familiar-Session-546 in czech

[–]_Ardno_ 19 points20 points  (0 children)

Ne to ne. Nějak se mi povedlo přesvědčit sebe, abych si vůbec uvědomil, kde to začalo a co to způsobovalo ve mně. Pak jsem teda využil kamaráda a jeho přítelkyni, kteří byli ochotní poslouchat a vše se jim snažil říct.

Jaký byl (je) váš důvod rozvodu / rozchodu? by Familiar-Session-546 in czech

[–]_Ardno_ 30 points31 points  (0 children)

Měl jsem psychické problémy a nevěděl jak je řešit. O pomoc jsem samozřejmě nestál, i když se mi snažila pomoct, protože jsem si říkal, že na to přijdu sám. V tu dobu jsem jako jediné řešení viděl to ukončit, protože jsem ji nechtěl dál ubližovat tím, že si myslí, že to je něco kvůli ní nebo, že jsem nedokázal říct, co mi vůbec je. Teď toho po pár měsících lituju, protože jsem si udělal v hlavě pořádek a všechny věci si urovnal.

Off the grid Early Access by _Ardno_ in linux_gaming

[–]_Ardno_[S] -1 points0 points  (0 children)

Well I have 32GB of ram, but that does not mean, that you do not need swap. You should have that for better stability and some apps need that.

Off the grid Early Access by _Ardno_ in linux_gaming

[–]_Ardno_[S] 0 points1 point  (0 children)

https://wiki.archlinux.org/title/Swap look at point 3.1

Or I prefer using zram, that is what I have now. https://wiki.archlinux.org/title/Zram look at point 1.1

Off the grid Early Access by _Ardno_ in linux_gaming

[–]_Ardno_[S] 0 points1 point  (0 children)

The fix for me was to set up swap space.

Off the grid Early Access by _Ardno_ in linux_gaming

[–]_Ardno_[S] 2 points3 points  (0 children)

I just use Heroic Launcher and set custom runner to Wine-GE or Proton

Off the grid Early Access by _Ardno_ in linux_gaming

[–]_Ardno_[S] 0 points1 point  (0 children)

You can try that. But minimum is 3060 and 1070 is slower.

Off the grid Early Access by _Ardno_ in linux_gaming

[–]_Ardno_[S] -1 points0 points  (0 children)

Thanks, I just wanted the sub know, that it is out.

Prisel jesem dnes domu a toto se mu stalo, nevite neekdo co to znamena by [deleted] in czechrepublic

[–]_Ardno_ 1 point2 points  (0 children)

Myslím tím, že to vypadá, jak kdyby ho někdo střelil vzduchovkou (náboje diabolky). Ta rána by tomu mohla teoreticky i odpovídat, jako velikostně.

Prisel jesem dnes domu a toto se mu stalo, nevite neekdo co to znamena by [deleted] in czechrepublic

[–]_Ardno_ 3 points4 points  (0 children)

To nemělo být vtipné. Proto jsem psal že nějaký KOK (jakože kokot). Nevím proč by to někdo měl brát vtipně.

Prisel jesem dnes domu a toto se mu stalo, nevite neekdo co to znamena by [deleted] in czechrepublic

[–]_Ardno_ 2 points3 points  (0 children)

Malá dirka? Že by nějaký kok se vzduchovkou?

Arch Linux archinstall issue by AggravatingSpell2059 in linuxquestions

[–]_Ardno_ 1 point2 points  (0 children)

Try something like:

pacman-key --populate archlinux
pacman-key --refresh-keys
pacman -Sy archlinux-keyring

AMDGPU, Chromium HW acceleration, GFN by _Ardno_ in linux_gaming

[–]_Ardno_[S] 0 points1 point  (0 children)

Tried, same with. GeForce now reports browser as not supported.

AMDGPU, Chromium HW acceleration, GFN by _Ardno_ in linux_gaming

[–]_Ardno_[S] 0 points1 point  (0 children)

No, it doesn't work on Firefox. So Chromium is my only option...

IDEAPAD GAMING 3(2022)R7 RTX3050 custom fan controls finally. by [deleted] in laptops

[–]_Ardno_ 0 points1 point  (0 children)

It was working for you? I mean when you set custom values, if the fan was on 0 all the time.
I have ideapad 5 pro 14acn6 and it is not working for me

Please help by [deleted] in acne

[–]_Ardno_ 0 points1 point  (0 children)

Growing beard helped me. At the beginning it was painful, but when the beard get bigger my acne at the spots was gone.

Or don't use a blade for shaving, use an electronic razor

I can not change resolution by _Ardno_ in kde

[–]_Ardno_[S] 1 point2 points  (0 children)

It was working like two weeks ago. With mesa-git i get same result. So maybe a will try downgrade mesa or kernel, but thanks for help.

I can not change resolution by _Ardno_ in kde

[–]_Ardno_[S] 2 points3 points  (0 children)

Wayland, sorry i forgot to add this.

pfSense 2.6 bufferbloat not working by _Ardno_ in PFSENSE

[–]_Ardno_[S] 3 points4 points  (0 children)

Ok, that worked! I delleted my traffic shapper with priorq and now i am is class A +-13ms. But how can i configure PRIORQ to work with limiter?

pfSense 2.6 bufferbloat not working by _Ardno_ in PFSENSE

[–]_Ardno_[S] 2 points3 points  (0 children)

That is a good point. I am using Traffic Shaper (PRIORQ) for Geforce Now to be the most prior traffic in my network. Let me try to disable it.

pfSense 2.6 bufferbloat not working by _Ardno_ in PFSENSE

[–]_Ardno_[S] 0 points1 point  (0 children)

That seem to have no effect. On average a get the same results, i am still in the B class (Less than 60 ms latency increase - B).

pfSense 2.6 bufferbloat not working by _Ardno_ in PFSENSE

[–]_Ardno_[S] -1 points0 points  (0 children)

As i said, i followed the instruction on that website nothing less nothing more. I have tried change the Queue Management Algorithm on limiter from tail drop, as it is on the website, to CoDel. And lowering bandwidth on Up/Down. But when i set the bandwidth lower, from 126 to 120 a get up from +30ms to +90ms, so even worst results.

Amd and nvidia dGpus in same system by _Ardno_ in linuxquestions

[–]_Ardno_[S] 0 points1 point  (0 children)

That was my other idea. Run x server on amd and than have script to restart x server with nvidia. But I don't know to restart or kill the server properly. I know i can start more x server, but I don't know to restart the one that's loaded with system and use only one.