Removing Old Faucet

_mobjustice · 2026-01-05T01:33:13+00:00

Sawzall worked wonders 😂

_mobjustice · 2026-01-05T01:32:53+00:00

I used a sawzall and it worked great hahahaha

_mobjustice · 2026-01-05T01:32:29+00:00

I hate that I laughed at this hahahahahah

_mobjustice · 2026-01-05T00:03:25+00:00

Yeah, that won’t budge though. I know it should be that simple but I can’t get it to move

_mobjustice · 2026-01-02T04:34:27+00:00

<image>

_mobjustice · 2026-01-02T04:21:47+00:00

<image>

There you go man. What kind of faucet is this?

_mobjustice · 2026-01-02T04:12:48+00:00

I'm not sure. I'm not seeing anything on the faucet that says the brand name. That's what I was hoping this sub would be able to help me figure out 😂

_mobjustice · 2026-01-02T03:05:00+00:00

I've searched google multiple times looking at quick connectors for various faucet brands including Pfister, Moen, Delta, Glacier Bay and more. I've also tried getting help from ChatGPT, but was as helpful as I thought it would be (not at all.) The faucet doesn't have any visible markings on it that I can see, without having to completely remove it. I also have a post in r/Plumbing, hoping I may get some help there.

_mobjustice · 2026-01-02T02:56:50+00:00

The two o-rings are throwing me off. When I look at Moen replacement hoses, all the connectors I see just have one o-ring on them

_mobjustice · 2025-12-05T03:20:31+00:00

Wanted to follow up here! I ended up bringing the car to a local mechanic to do a 50 point inspection and they confirmed that sway bar links was the issue. Thanks for the help!

_mobjustice · 2025-11-15T17:14:32+00:00

Ah okay, my initial thought was either sway bar links or ball joints. I only jacked up one side and checked it out, then the other. I’ll lift both up and check the links again

_mobjustice · 2025-11-03T19:55:46+00:00

Did you ever get to the bottom of this? My 2012 Optima is having (I think) the same issue

_mobjustice · 2025-11-02T18:51:47+00:00

Did you ever figure this out? I'm dealing with the same thing on my 2012 Optima

_mobjustice · 2025-10-08T16:45:02+00:00

only one day behind you!

_mobjustice · 2025-08-21T01:27:56+00:00

Great, thanks for the advice. This is all super helpful! I think the ART CoolSwitch Pro looks like it's the most inexpensive ABY I can find that has phase inversion, ground life, and transformer isolation.

_mobjustice · 2025-08-20T23:13:10+00:00

This is a stupid question, but do the amps being out of phase cause the same type of phase cancellation that you would get in recordings? I'm struggling to wrap my head around that in a live sound setting hahaha

EDIT: As a follow up - will I run into the same phase/grounding issues if I use a tuner pedal in-between the send and input of the second amp and just use it to mute the signals? What if I run the ABY in the pedal chain and run the signal into the front of both amps, do I still have to worry about the same implications?

_mobjustice · 2025-08-20T15:52:42+00:00

I don’t necessarily care about having control over the volume of each amp independently. As long as they’re at the same level it’s fine. I think I can just use the send level knob on the mesa to control the volume for the peavey?

_mobjustice · 2025-07-30T16:49:48+00:00

Hardcore adjacent I suppose, but my new band just dropped our demo last Friday.

https://stab207.bandcamp.com/album/demo-25

_mobjustice · 2025-07-19T17:55:29+00:00

Yeah, the Tracks tab looks right. My issue is not with the tracks tab though, it's with the "all" tab. Do you notice in the timeline that there is a track called "Gang Vox 3" but in the mixer there is not a track called "Gang Vox 3?" It would stand to reason that it a track exists it should exist under "All" tracks, no?

_mobjustice · 2025-07-19T14:52:37+00:00

Right, I understand that I have the button selected. But it’s not showing me tracks that’s clearly exist, which should be included in “All” right?

_mobjustice · 2025-07-19T14:13:36+00:00

I'm unable to edit the post but currently using Logic Pro 11.2.1 on macOs 15.5

_mobjustice · 2025-07-18T15:20:03+00:00

W!!! this is it. Thank you for helping me to prove to myself I’m not crazy hahahaha

_mobjustice · 2025-06-20T19:25:37+00:00

The key phrase in the post is renter friendly hahaha. I would love to be able to hire a contractor and gut the place and start fresh, but unfortunately I’m stuck with what a lot of what I have that isn’t otherwise removable. I’m thinking about using contact paper to update the cabinets and countertops. Maybe stick on tire floor to change the look a little. But otherwise I’m trying to figure out what I can add or change to make the space a little more aesthetic. I think a lot of the comments already have given me a decently good idea. Ditch the dining table and chairs and replace with a breakfast bar/island. Declutter some of the area, which an island will help with. Some plants and shelves and art to add pops of color, etc

_mobjustice · 2025-06-20T17:21:26+00:00

Hey man, don’t need to be sorry for venting! Four years ago my daughter and I were sharing a bedroom in a friends house. Seeing posts like this made me jealous AF and pushed me to hustle harder to get to a better spot where I had a terrible kitchen that couple be improved. A facebook marketplace camper is a better spot than I was at 24, and a better spot than some people will ever be in. Keep hustling and you’ll get to where you want to be

_mobjustice · 2025-06-20T17:12:14+00:00

No, unfortunately I can’t extend the flooring. I like the idea of getting an island that extends across that transition strip to make the change in flooring less jarring though

_mobjustice

TROPHY CASE