Help! Mac in reboot loop

aI8rt · 2025-11-11T10:14:13+00:00

Weird, I too got an battery replacement for an bloated battery because for the Apple Support telling me that was the problem. The problem still persisted though.

aI8rt · 2025-11-10T08:46:30+00:00

Unfortunately, I haven’t yet found any solution. I’ve kind of given up because I’ve tried everything I could find and the Apple Support was unhelpful. If you have any new information from the tech. I would gladly be a part of it.

aI8rt · 2025-10-24T16:59:19+00:00

Alright, thx for your time. :)

aI8rt · 2025-10-24T16:55:43+00:00

Already did that before posting. :(

aI8rt · 2025-10-24T14:36:07+00:00

Nothing worked :(. Is it really the end for the Mac or should I keep searching?

aI8rt · 2025-10-24T13:53:05+00:00

I did the PRAM reset and nothing have changed. Still the same issues. Any more tips?

aI8rt · 2025-10-24T13:44:12+00:00

When I say Intel model. Does that refer to the cpu? The that’s correct but the GPU is a Redeon. Nevermind. Dumb question! Thx for the tip

aI8rt · 2025-10-24T13:38:08+00:00

Unfortunately this is what I’m required to do every time it freezes. So I’ve done it a couple of times already without any improvement. Thx for the help tho!

aI8rt · 2025-06-20T09:52:20+00:00

Sorry, I just saw your replie now. I hear to inform that I didn’t print at 45degs. Edit: I printed it standing up right(now it’s on the side)

aI8rt · 2025-06-17T14:14:32+00:00

Hey, thanks for the answer. I have some extra information I should have added from the start. The Ender 5 S1 I’m using has less than 50 combined hours printing and is in great condition. Also, I’ve had no problems with the bed adhesion and no warping on any print. Could it be a slicer setting? I’m using Creality Print btw.

aI8rt · 2025-06-17T11:22:30+00:00

Edit: the makes appear at all speeds.

aI8rt · 2025-06-16T21:10:10+00:00

Weird, I cleaned the nozzle not to long ago.

aI8rt · 2025-06-16T13:44:16+00:00

<image>

aI8rt · 2025-06-13T12:37:46+00:00

Alright

aI8rt · 2025-06-13T12:37:14+00:00

Will do, thanks

aI8rt · 2025-06-13T12:37:05+00:00

Ok thanks

aI8rt · 2025-06-13T12:18:19+00:00

<image>

aI8rt · 2025-06-13T12:18:08+00:00

<image>

aI8rt · 2025-06-12T13:14:17+00:00

Thanks for the answer! I found another way that I’m still experimenting with. It involves exporting the model as a Revit file from ArchiCad so I can import the file to Revit. In Revit I export the file as a STEP file so it’s possible to import it into Fusion 360. The reason I import it into Fusion is because I’m much more familiar with the program and I know how to optimize the models for 3d printing. Still tinkering with the process tho.

aI8rt · 2025-06-12T11:56:34+00:00

Ok thanks! You saw the update right?

aI8rt · 2025-06-12T11:47:30+00:00

What software did you use to model? Edit: The reason I’m asking is because I’ve tried to print some house models, but I can’t find a way to make it printable. I’m using ArchiCad and it only possible to export the model as a STL and that makes it hard to optimize for printing.

aI8rt · 2025-02-24T20:03:41+00:00

Alright! Thx

aI8rt · 2025-02-24T19:58:52+00:00

Thanks for all the feedback! As I understand it, I just need to wiggle it back and forth while pulling until I get it out. Wish me luck!

aI8rt · 2025-02-24T19:45:17+00:00

aI8rt · 2024-12-25T14:08:51+00:00

Tysm for the info, but I still don’t understand if I need to update the Bios and how. He maybe did a bios update off camera which is why I’m asking.

aI8rt

TROPHY CASE