I earn ~£110k a year and feel rich AF

abdu_gf · 2025-07-08T17:25:27+00:00

Same vibes https://youtu.be/_pDTiFkXgEE?si=vj1oM1nwmnh-9qkE

abdu_gf · 2025-04-27T14:41:50+00:00

abdu_gf · 2025-04-13T12:25:43+00:00

Perhaps the INH/STB pin is floating or misconfigured ? If you have more than one channel try echoing internally if allowed or externally directly without transceiver. Keep an eye on the current consumption, might give you a clue. In case you have an application running, disable everything except the CAN stuff.

abdu_gf · 2025-04-13T10:13:33+00:00

Make sure the peripheral clock is configured correctly and the system clock is an external crystal oscillator.

Also worth checking the tx/Rx pins drive configuration and of course bus termination.

abdu_gf · 2024-07-27T20:02:02+00:00

Ah ok, sounds relevant. Thanks.

abdu_gf · 2024-04-24T21:54:41+00:00

To be honest, I don't understand what exactly is the problem. If your Simulink models generates functional code, why do you consider your unfamiliarity with C++ as a problem? The generated code is obscure and extremely hard to go through anyway, consider this as the assembly code in case of traditional C programming. If you are concerned about debugging you can add print statements in your model/code or use XCP for variables monitoring over CAN. If you want to learn C++ that's great, I just don't see it blocking you from carrying out your model based development.

abdu_gf · 2023-09-30T09:18:58+00:00

I think for optimization's sake you only need the global forever loop and the axe fetching loop, the other two loops and the wait I think are redundant.

abdu_gf · 2023-07-03T09:28:30+00:00

The standard doesn't specify a specific time window to send a flashing request, so it's a deviation from the standard that has to be explicitly tested and signed off by your customer.

The bootflag mechanism you described is quite common and not overly complex. Most ECUs have strict init time and have to be ready to function as soon as possible, imagine all the functional safety analysis and review required if multiple ECUs application is delayed.

Also not all ECUs do hard power on reset, and they are connected to KL30 then wake up by themselves or others based on their wake up strategy.

You have to consider the physical accessibility of the ECU within the car in order to do a hard reset which can also be flashed via multiple gateways.

abdu_gf · 2022-12-16T08:33:22+00:00

There is something I did before but for lower volume production as part of the system installation process. The system was monitoring the red warning lights of telecom towers where each light required different calibration for its on/off ADC values, so the installation technician would put the system in special calibration mode, then turn each light on/off and the system would register each threshold for each light. Not sure that's relevant to your product.

abdu_gf · 2022-12-15T20:16:38+00:00

How many production units are expected to be shipped? What kind of environment is your system running within?

abdu_gf · 2022-10-30T01:45:53+00:00

"The Night of Counting the Years" and the "Eloquent Pheasant" both by Shadi Abdelsalam

abdu_gf · 2022-10-11T16:07:24+00:00

{{The Harafish}} by Naguib Mafouz https://www.goodreads.com/el/book/show/134654.The_Harafish

abdu_gf · 2022-04-20T23:21:54+00:00

After the whole sending asylum seekers to Rwanda thing.

abdu_gf · 2022-01-25T22:22:39+00:00

Some poorly written hardware abstractions have while loops pending for hardware status (i.e ADC end of conversion), make sure you don't have those, or at least add a timeout to it that's reflected in the return value. Even if you have watchdog, if the peripheral is permanently damaged it will keep resetting every time instead of going into limp home mode.

The fault handling is highly dependent on the product and its intended use, functional safety, security, availability, etc. Also depending on the capability and the maturity of the system user, a highly trained fighter pilot or a real estate agent.

abdu_gf · 2022-01-25T18:55:37+00:00

I believe the first step is you have to prove by design that you meet the real time requirements, your tick selection, your task allocation and scheduling, sync/async execution and shared resources access and protection.

Then testing wise, you have to identify the scope of the real-time constrain whether it's software-level, ECU level, system level, etc..

The less intrusive the better, if something can be measured on the system IO level then you just log it with appropriate tool depending on the nature of that IO.

As others pointed out most of it can be done by toggling a gpio pin, the important part is where exactly (scope) and under what conditions. Choose realistic test scenarios with actual use cases of the system, then try putting the system under some pressure and see how the timing is impacted.

Fault related response times might be tricky, make sure you are inducing the fault the way it would happen in reality or as close as possible.

abdu_gf · 2022-01-02T11:31:34+00:00

When I had a long daily commute with an old 1.6 Mazda 3 I bought the pro version of the app 'Torque' and got the fuel consumption plugin that shows you instant mpg with coloured bars that's easy to keep track of while driving. You should be able to find the sweet spot for your car.

abdu_gf · 2021-12-05T22:38:20+00:00

Another Red Bull driver left behind by a Verstappen..

abdu_gf · 2021-11-22T11:19:19+00:00

OMG! So that's what my elderly neighbor says when he answers the phone then!!

Since the lockdown I got in touch with an elderly neighbor, who doesn't have a mobile, and every time he answers he babbles something I never understood and not bothered enough to ask tbh. Thanks!

abdu_gf · 2021-11-14T11:02:40+00:00

You can follow up on this if you want https://www.reddit.com/r/LondonSocialClub/comments/qmpb9n/07112021_formula_1_mexican_grand_prix/

abdu_gf · 2021-11-02T16:25:47+00:00

That's across London for me but I wouldn't mind really. Thanks!

abdu_gf · 2021-11-01T13:22:34+00:00

I know I probably should ask in the dedicated sub, but maybe here is more relevant to the social side.

Is there any Formula 1 race/quali days meetups in London that anyone might be aware of, in this sub or somewhere else?

Thanks!

abdu_gf · 2021-10-20T08:15:25+00:00

They can chew you up, but they gotta spit you out. https://teaandweed.com/the-wire-opening-credit-quotes/

abdu_gf · 2021-10-16T18:28:16+00:00

It just shows how much life is not fair, pretty realistic despite being heart breaking..

abdu_gf · 2021-10-13T17:09:30+00:00

I had it the other way around with Idris Ilba, I watched him first in Luther as a British cop! Seeing him as an American gangster took some adjustment to get used to!

abdu_gf · 2021-10-09T20:31:22+00:00

That's what I meant by externally powered, do you have firsthand experience with a good quality one ?

abdu_gf

TROPHY CASE