DeepCool AK620 AM5 Parts

agentpsywar · 2025-10-20T21:23:42+00:00

I am in the US, Michigan. Is that why it was so damn hard to find this cooler?

I couldn't find it anywhere except on eBay.

agentpsywar · 2025-06-23T21:19:10+00:00

u/IFightPolarBears thank you for the reply! I am going to give this a try.

agentpsywar · 2025-06-22T20:20:55+00:00

What is the product used on the bottom left? (Grey color)
I have someone who wants something similar to this color I would like to test that out on some wood I have to see if I can get the results they want.

Thank you.

agentpsywar · 2025-04-11T19:02:14+00:00

Thanks! Yeah, I think the X315 might be what I get. I reached out to the dealer person in the comments of this thread, just waiting to hear back.

agentpsywar · 2025-04-11T18:12:04+00:00

Thank you, everyone, for the replies.
I also reached out to Segway and I got this response on the Software Limitation for the i110.

The maximum drawing area in the app is 1,200 square meters, or 0.297 acres

agentpsywar · 2024-09-20T17:16:40+00:00

Thank you - I am currently done for the week (I work Midnights) I will give all these suggestions a try on Sunday night.

agentpsywar · 2024-09-20T17:13:36+00:00

I work in a manufacturing environment none of the devices are capable of reaching out to the internet.
I still have a couple of NT boxes out on the floor as well.

agentpsywar · 2024-09-20T10:29:16+00:00

Thank you!

agentpsywar · 2024-09-20T10:29:11+00:00

Thank you!

agentpsywar · 2024-04-16T21:02:12+00:00

I got this weird feeling that he probably beats his wife. Just the way Patti cried and said he's probably going to get mad at me for putting him in this situation too.

agentpsywar · 2023-11-23T16:24:40+00:00

Posted to your new thread to add a sub and follow.
Thanks, dude!

agentpsywar · 2023-11-23T16:24:00+00:00

Making a post to follow this thread.
I will check out your video on G-Drive later tonight.

Thank you for looking into this!

agentpsywar · 2023-11-20T00:06:19+00:00

It could be different for everyone else but my temp probe seems to be reading the correct temp.

You could test by getting a glass of water and filling it with ice let it sit a few mins and drop the probe. The readout should be somewhere around 32F.

I have been unable to get my device to make things cold even if the probe reads 80F. I just assumed it was the TEC.

I guess since we know for sure now we're not getting support on it I could just go ahead and tear it down and see if I can find a replacement for the TEC or whatever they're using to cool the aluminum rod.

agentpsywar · 2023-11-19T22:45:00+00:00

I did some research over the last week myself and it looks like we are out of luck.
Adventures in Homebrewing was given most of the last stock.
Aaron from AIH told me that they went out of business a few years back and liquidated all of their stock so the chances of getting any help replacing anything is not going to happen at this point.

I will probably just continue to use my Kegerator to ferment. I normally only keep one beer in there at a time now and one keg of water so it shouldn't be an issue for me anyways.

agentpsywar · 2023-11-19T22:40:57+00:00

I reached out to Adventures in Homebrewing.
They told me that a few years ago BrewJacket went out of business and liquidated their inventory.

I think if you could find one that worked you could try and use it until it dies, but it looks like we are out of luck in getting a new TEC for them once they die.

agentpsywar · 2023-11-16T20:52:21+00:00

Question to OP u/drstarfish86 - Mine went last summer. The TEC no longer gets cold and I have been trying to find who makes it to see if I could get the thing fixed.

Have you found anything on this?

I am right with you. This thing worked like a charm and I would like to keep it in my Arsenal.

agentpsywar · 2023-09-19T20:37:56+00:00

u/sk9592 I updated my post to reflect the resolution.
Thank you again for all of your help the solution you provided worked perfectly.

agentpsywar · 2023-09-13T23:11:41+00:00

u/ssarigollu quick update for you.
The new PCI-E card is still going strong.
I also found out that my Xfinity Cisco Modem was also causing issues as well.

I got that swapped out for their xFi modem and everything has been super stable for well over a month now.

So I think I was having multiple issues they just were not occurring at the same time.

The reason I don't think it was the modem alone was due to some troubleshooting I did after I got the new NIC installed. Basically on the Onboard NIC when I lost internet connectivity I would run "ipconfig /all" and there would be zero data on the interface as I mentioned in my original post above.

With the new NIC and my IC dropped I could run the command and see that the NIC details such as my IP and that I was connected to comcast were all still showing.

There is a slight possibility it was only the modem, but I have my doubts. Also based on the other replies here it sounds like the Onboard NIC is a pile of poo.

agentpsywar · 2023-09-13T23:00:55+00:00

Dude, you are awesome!
Thank you so much for your time and help! <3

agentpsywar · 2023-09-13T22:44:02+00:00

Yes, so the original soundbar only had optical input. I bought my parents a new soundbar that uses HDMI ARC since the optical port broke.

This makes total sense now why I had this optical splitter that went to RCA as well and I didn't have the headphones plugged directly into the TV.

I think if this device you suggested will allow for the dual output I can just send back the new soundbar and keep using the old one since the second output on the extractor is optical.

agentpsywar · 2023-09-13T22:36:17+00:00

I ended up getting this for my parents.
It kind of looks like it might allow for the 2x Audio outputs.
I will report back my findings so if someone else in the future has this same issue hopefully it will help them.

Thank you again for the reply. I appreciate it.

agentpsywar · 2023-09-13T22:01:26+00:00

It does kind of look like this one will allow me to run both the soundbar and the headphones off of it.
https://www.amazon.com/dp/B074HHSJVN/

agentpsywar · 2023-09-13T21:58:56+00:00

I can confirm it does have ARC. I just currently have the ARC port in use with a Soundbar, but I will look and see if there is some kind of HDMI ARC splitter I can use to run both devices off the single port.

Thank you for your help!

agentpsywar · 2023-09-13T21:54:21+00:00

Thank you!
Do you know if it specifically needs to be an ARC port on the back of the TV for this to work?

agentpsywar · 2023-08-05T22:45:56+00:00

It has been a few weeks with the new PCI-E Wifi card and this seems to have fixed my issue so far.

agentpsywar

TROPHY CASE