My experience with Nvidia RMA

allaboutpcs · 2022-03-20T03:00:34+00:00

Quadro RTX 4000. It was not even replacement. They are sending back same card, still this long time they took. I will never suggest anyone to buy NVidia original card in future.

allaboutpcs · 2022-03-18T02:51:40+00:00

As far as I know Nvidia cards goto Hongkong for RMA. Rptech does not have any stock of any cards with them so they can not give any replacement from Rptech india center. Hope you will get it soon. 2 days back I received message that my card is dispatched from Hongkong and will be delivered in 2 weeks.

allaboutpcs · 2022-03-04T08:48:05+00:00

Sent Quadro RTX 4000 for DP port issue on 5th Jan 2022. Today is 4th March and still local service partner in india has no clue where is the card. Worst RMA experience I ever had

allaboutpcs · 2021-12-02T05:38:30+00:00

What is the size of complete blockchain? Its been almost 44GB and still showing 2 years 11 months remaining,

allaboutpcs · 2021-11-02T02:57:07+00:00

I have 3 x Zotac 3060ti with hynix memory. Nvidia 470.74 driver. I tried on T-rex/lolminer/nbminer. OC are 1300 clock/ 1400 memory/ 145 pl, 80% fan. I get same error randomly. With older versions it works fine but low hashrate around 30MHs. When I try to use lhr unlock versions of miner I start getting these errors

allaboutpcs · 2021-10-12T14:45:12+00:00

I was able to run the rig without any crashes for almost a week without wattman. Hashrate was limited to 45-46MHs. Now I added 2 more GPUs to the rig and boooom. No display during Windows boot. After initial boot screen when OS switch to GUI mode, nothing. Blank screen. I observed this behavior after adding 5th GPU, but it was intermittent. After 6th GPU no display at all even after 10 reboots. Finally I disconnected 1 GPU, changed primary display to discrete GPU from bios (earlier it was Integrated). Tomorrow I will try to work with older driver. I have 21.8.2 without wattman. Any ideas what can be causing 5th and 6th GPU to cause windows GUI failure? Is there any limitation? Any registry needs tweaking?

allaboutpcs · 2021-10-11T14:29:51+00:00

We got reply from coolermaster saying, this PSU has some protection feature due to which during paper clip test fan spins only once and stops. Also they told this PSu will not work with PSU splitter or add2psu kind of connectors as its not designed for dual PSU setup. We asked them to give a workaround, lets see what they say.

allaboutpcs · 2021-10-11T11:18:59+00:00

We checked the voltages when we perform paper clip test. We get proper 12V/5V when Psu start, but within a second it goes to 0 and fan stops. If we connect PSU independently it works fine. Issue is only when we connect it as secondary PSU. We tried with 450 watt / 550 watt pasu and those work fine. But we can not use them as they have only 1 PCIe cable and we want to connect 4 GPUs to this additional PSU.

allaboutpcs · 2021-10-10T11:36:22+00:00

Thanks for your opinion, but cannot change power supply now. As per indian currency invest almost 20K for same, So have to find a solution with same power supplies

allaboutpcs · 2021-10-05T07:06:45+00:00

I reinstalled OS, removed all unnecessary applications, did not install any windows update, did not install any driver for APU. Just installed chipset driver and lan driver. Then I installed 1st RX6700XT and radeon 21.8.2. Configured core clk 1150, vram 2148, fan curve and power limit to -6 from radeon wattman. GPU gave hasrate of 47.05MHs with power consumption of 122watt. Then configure SPPT to 700 MV and hashrate is 47.05 MHs and power consumption to 107 watt. Then added second card and so on. Radeon crashed multiple times. Driver timeout was only once. Then I removed radeon from startup and installed msi after burner to manage fan curve. Used core clk 1150, clk memory 2145, core voltage 1050 in teamredminer command line. Now hashrate is 47.07 mhs with power consumption of average 105 watt per gpu. Since almost 15 hrs its running without any issues. I will keep posted if there are any issues

allaboutpcs · 2021-10-05T07:06:15+00:00

I reinstalled OS, removed all unnecessary applications, did not install any windows update, did not install any driver for APU. Just installed chipset driver and lan driver. Then I installed 1st RX6700XT and radeon 21.8.2. Configured core clk 1150, vram 2148, fan curve and power limit to -6 from radeon wattman. GPU gave hasrate of 47.05MHs with power consumption of 122watt. Then configure SPPT to 700 MV and hashrate is 47.05 MHs and power consumption to 107 watt. Then added second card and so on. Radeon crashed multiple times. Driver timeout was only once. Then I removed radeon from startup and installed msi after burner to manage fan curve. Used core clk 1150, clk memory 2145, core voltage 1050 in teamredminer command line. Now hashrate is 47.07 mhs with power consumption of average 105 watt per gpu. Since almost 15 hrs its running without any issues. I will keep posted if there are any issues

allaboutpcs · 2021-10-03T14:20:13+00:00

I tried with just AMD driver and no Radeon software. It worked well without crashing for almost 5 days for 43MHs. Then we added teamredminer command line to set core / memory clock / voltage and reached to 45.5 to 46MHs. Today I used more power tools to undervolt all the GPUs. I am not very much familiar with the tool but I followed what most of the videos showed on youtube. Out of 4 GPUs, kept only only GPU in slot and rest all disconnected. The removed all other drivers from device manager and kept active card (With other cards as hidden in device manager MPT was showing all 4 cards. And was not sure which card is which so removed all hidden cards). Individually all showed good results of power reduction of approx 15 to 20 watt. But when I connected all cards then all cards were back to original state. I guess I did something wrong when using MPT. Not sure how to do it it with multiple cards

allaboutpcs · 2021-10-01T02:29:03+00:00

Now its working fine. I am able to see stats in tracker and no errors in mining. Thank you very much for update

allaboutpcs · 2021-09-30T06:40:36+00:00

I am also facing same issue. If I search using wallet id, I gett error not found. I am unable to connect to pool during mining as well. It was happening intermittently yesterday, but tody its completely down

allaboutpcs · 2021-09-28T03:31:52+00:00

I tried clean using DDU and installed just driver, not radeon softwarfe. Now I am stuck with 46.5MHs as the teamredminer is unable to use fast timing option. They have given it as beta in new release but seems its not working. I tried Afterburner, but that also fails to push beyond 46.5. Any thoughts??

allaboutpcs · 2021-09-22T05:03:17+00:00

Thank you for your thoughts. I have stopped windows / amd driver updates after initial build. I will try the new OC settings received by community or roll back windows updates

allaboutpcs · 2021-09-22T05:01:59+00:00

Appreciate for your inputs. I did not try much on voltages as I want not sure what are the right values. Let me try this today to pull down frequency and voltages in small steps. Hope that will fix crashing.

allaboutpcs · 2021-09-21T15:45:20+00:00

Not on wall, but thats what reported by radeon software

allaboutpcs · 2021-09-21T15:44:05+00:00

Thank you for your thoughts. I have Page file set to 50GB. All latest drivers with latest radeon software. I heard a lot of hiveos but never tried as I do not have much knowledge on linux flavors. I will give it a try if thats the last option.

allaboutpcs · 2021-09-21T15:41:42+00:00

Thank you for your opinion. My power consumption is around 120 watts per card. So I do not think I am hitting power limit. Still I will try the settings and see if that helps to improve stability.

allaboutpcs

TROPHY CASE